소개
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
안전 정보
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Keep the solar panel clean from dust, dirt, and debris to maintain charging efficiency.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- 제품을 분해하거나 개조하지 마십시오. 그렇게 하면 보증이 무효화되고 제품이 손상될 수 있습니다.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
모든 구성품이 들어 있는지 확인하려면 패키지를 확인하세요.
- Linkind Outdoor Solar Motion Sensor Light (x2)
- 지면 말뚝 (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- 사용 설명서 (본 문서)
제품 특징
- 고휘도 : Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- 이중 색온도: Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- 모션 센서: Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- 세 가지 작동 모드: Customizable lighting modes for various scenarios (details in Operating Instructions).
- IP67 방수 등급: Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- High Efficiency Solar Panel: Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- 2-in-1 설치: Versatile design allows for both ground insertion and wall mounting.
- 조정 가능한 각도: Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
이미지: 자세한 view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
설정 및 설치
The Linkind solar light offers two installation options: ground insertion or wall mounting.
접지 삽입
- 모드 선택: Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- 홀더 조립: Attach the light unit to the top part of the ground stake.
- 스파이크 연결하기: Connect the two spike sections of the ground stake together.
- 접지에 삽입: Firmly insert the assembled light and stake into soft ground in a location that receives amp직사광선.
벽면 장착
- 모드 선택: Before assembly, press the power button on the back of the light to select your desired operating mode.
- 홀더를 고정하세요: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- 두 부분을 연결하세요: Attach the light unit to the wall mounting bracket.
- 각도 조정: Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
작동 지침
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
색온도 변경
To switch between 3000K Warm White and 6500K Cool White, 전원 버튼을 3초 동안 길게 누르세요.
Cycling Through Modes (Short Press)
- 모드 1 : Keeps dim light all night. The motion sensor does not react in this mode.
- 모드 2 : Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- 모드 3 : Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
유지
- 깨끗한 태양광 패널: 부드러운 천으로 태양광 패널을 정기적으로 닦아주세요.amp 먼지, 흙 또는 눈을 닦아낼 수 있는 천입니다. 패널이 깨끗해야 충전 효율이 극대화됩니다.
- 배치 확인: Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- 손상 여부 검사: Occasionally inspect the light for any physical damage or loose connections.
- 배터리: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 밤에는 불이 켜지지 않습니다. | Insufficient sunlight exposure during the day. 태양광 패널이 더럽습니다. Light is in "OFF" mode (Mode 3 without motion). 배터리가 소진되었습니다. | 조명을 햇빛이 더 잘 드는 곳으로 옮기세요. 태양광 패널을 청소하십시오. Press the power button to cycle to Mode 1 or Mode 2. 배터리가 완전히 충전되려면 1~2일 정도 맑은 날씨에 충전하십시오. |
| 조명이 깜빡거리거나 밝기가 약합니다. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. 태양광 패널을 청소하고 장애물을 제거하세요. |
| 모션 센서가 작동하지 않습니다. | Light is in Mode 1 (always dim). 센서가 가려져 있습니다. 외부광 간섭. | Switch to Mode 2 or Mode 3. Clear any debris or objects blocking the sensor. Relocate the light away from other strong light sources. |
| 밝은 색상은 변경되지 않습니다. | 잘못된 버튼 누름. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 링크드인 |
| 모델 번호 | LL1801131 |
| 광원 | 24 LED |
| 광속 | 1000루멘 |
| 색온도 | 3000K 웜 화이트 & 6500K 쿨 화이트 |
| 동작 센서 감지 범위 | 3-8 미터 |
| 모션 센서 감지 각도 | 120° |
| IP 등급 | IP67 |
| 전원 | 태양열 전원 |
| 배터리 유형 | 1 리튬이온(포함) |
| 태양광 패널 효율성 | 22% Conversion Rate (Monocrystalline Silicon) |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 제품 크기(L x W x H) | 15.4 x 4.8 x 10.1cm(6.06 x 1.89 x 3.98인치) |
| 품목 무게 | 600g(1.32파운드) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
보증 및 지원
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.
