소개
This manual provides comprehensive instructions for the STARTRC Hard Case, model 1222, designed specifically for the DJI Mavic 3 Classic Fly More Combo and its controller. This robust, waterproof transport case ensures the safe storage and transportation of your valuable drone equipment and accessories. Please read this manual thoroughly before use to ensure proper handling and maximum protection for your gear.
설정 및 보관
The STARTRC Hard Case features custom-cut foam inserts designed to securely hold your DJI Mavic 3 Classic drone, remote controller, batteries, and other accessories. Follow these steps to properly arrange your equipment:
- 케이스 열기: Release the latches on the front of the case and lift the lid.
- Identify Compartments: The foam interior has dedicated slots for each component. Refer to the diagrams below for optimal placement.
- Place Drone: Carefully place the DJI Mavic 3 Classic drone into its designated slot. Ensure it fits snugly without force.
- 장소 컨트롤러: Insert your DJI RC or RC-N1 remote controller into its respective compartment. The case is designed to accommodate both types.
- 배터리 보관: Place intelligent flight batteries into their individual slots. The case typically has space for multiple batteries.
- 액세서리 추가: Utilize the remaining compartments for accessories such as ND filter kits, low-noise propellers, USB-C control sticks, RC cables, 65W portable charger, and battery charging hub.
Figure 1: Optimal arrangement of DJI Mavic 3 Classic drone and accessories within the STARTRC Hard Case.
Figure 2: The egg-crate foam in the lid provides cushioning and protection for drone propellers.
Figure 3: The case is designed to securely fit both DJI RC and DJI RC-N1 standard remote controllers.
작업
Operating the STARTRC Hard Case is straightforward, focusing on secure closure and comfortable transport.
- 케이스 종료: Once all items are securely placed, gently close the lid. Ensure no items are protruding or preventing a complete seal.
- Securing Latches: Press down firmly on both rugged latches until they click into place. This ensures the case is securely closed and maintains its waterproof and pressure-resistant properties.
- 적재: Use the comfortable, woven handle for easy transportation. The case is designed to be labor-saving and easy to lift.
- Air Pressure Balance Valve: The case includes an air pressure balance valve. This valve automatically adjusts internal air pressure, which is useful when traveling to different altitudes, preventing vacuum lock or pressure buildup.
Figure 4: The case features IP67 level waterproofing and pressure resistance for extreme protection.
Figure 5: Key features include a comfortable handle, rugged latches, padlock hole, and an air pressure balance valve.
Figure 6: The ergonomic handle allows for easy and comfortable transportation.
유지
Proper maintenance will extend the life and effectiveness of your STARTRC Hard Case.
- 외부 청소: Wipe the exterior ABS shell with a damp cloth and mild soap if necessary. Avoid abrasive cleaners that could damage the surface.
- 내부 폼 청소: The EVA foam inserts can be gently vacuumed to remove dust or debris. For spills, spot clean with a damp cloth and allow to air dry completely before reassembling.
- Inspecting Latches and Seal: Regularly check the latches for any signs of wear or damage. Ensure the rubber seal around the lid is clean and free of debris to maintain its waterproof integrity.
- 저장: 사용하지 않을 때는 케이스를 직사광선을 피해 서늘하고 건조한 곳에 보관하십시오.
문제 해결
If you encounter any issues with your STARTRC Hard Case, refer to the following common solutions:
- Case Does Not Close Properly:
- Check if any items inside are misplaced or too large, preventing the lid from seating correctly.
- Ensure the foam inserts are correctly aligned.
- Inspect the latches for any obstructions or damage.
- 물 누출:
- Verify that the latches are fully engaged and securely closed.
- Inspect the rubber gasket around the lid for cracks, tears, or debris that might compromise the seal. Clean the gasket if necessary.
- Ensure the air pressure balance valve is functioning correctly and not obstructed.
- Difficulty Opening After Air Travel:
- The air pressure balance valve should prevent this, but if it occurs, allow the case to equalize pressure in a stable environment for a few minutes before attempting to open.
명세서
| 특징 | 세부 사항 |
|---|---|
| 제품 이름 | Mavic 3 Classic Waterproof Case |
| 모델 번호 | 1222 |
| 호환 모델 | DJI 매빅 3 클래식 |
| 제품 크기(L x W x H) | 가로 42cm x 세로 36cm x 높이 16cm (세로 16.5cm x 세로 13.3cm x 높이 5.9인치) |
| 제품 무게 | 1.9kg(4.2파운드) |
| 주요소재 | Acrylonitrile Butadiene Styrene (ABS) and Ethylene-vinyl acetate (EVA) |
| 외부 코팅 | 딱딱한 |
| 색상 | Black with Red interior accents |
| 폐쇄 유형 | Buckle (Latches) |
| 핸들 타입 | Woven Handle / Versatile Handle |
| 구획 수 | 1 (main compartment with multiple foam cutouts) |
| 방수 등급 | IP67 Level Waterproof |
| 특징 | Full protection, Moisture-proof, Waterproof design, High-Density Foam, Pressure resistance, Air Pressure Balance Valve, Padlock Hole |
그림 7: 이상view of product dimensions, weight, materials, and key protective features.
보증 및 지원
For warranty information or technical support regarding your STARTRC Hard Case, please refer to the official STARTRC web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
참고: 구체적인 보증 조건은 지역 및 소매업체에 따라 다를 수 있습니다.
