1. 서론
This manual provides instructions for the installation, operation, and maintenance of the Broadcom Dual-Port 100 Gb/s QSFP56 Ethernet PCI Express 4.0 x16 Network Interface Card (NIC), model BCM957508-P2100G. This device is designed to provide high-speed network connectivity for servers and workstations requiring advanced data transfer capabilities.
2. 제품 오버view
The Broadcom BCM957508-P2100G is an internal network interface card featuring dual QSFP56 ports, each capable of 100 Gb/s data transfer rates. It utilizes a PCI Express 4.0 x16 interface for optimal performance and is designed for fiber optic connectivity. The card is compatible with various operating systems, including Windows, macOS, and Linux.
An image showing the Broadcom BCM957508-P2100G network interface card. The card features a green PCB, a large silver heatsink covering the main chip, and two QSFP56 ports on the bracket. The PCI Express connector is visible at the bottom.
3. 설정
3.1. 시스템 요구 사항
- Available PCI Express 4.0 x16 slot (compatible with earlier PCIe generations at reduced performance).
- 호환 운영 체제: Windows, macOS 또는 Linux.
- Sufficient power supply for the system.
- Appropriate QSFP56 fiber optic transceivers and cables (not included).
3.2. 하드웨어 설치
- Power off your computer and disconnect the power cord.
- 컴퓨터 케이스를 엽니다.
- Locate an available PCI Express 4.0 x16 slot on the motherboard.
- 컴퓨터 케이스에서 해당 확장 슬롯 덮개를 제거하십시오.
- Carefully insert the Broadcom NIC into the PCIe slot, ensuring it is fully seated. Secure the card with the bracket screw or retention clip.
- 컴퓨터 케이스를 닫고 전원 코드를 다시 연결하세요.
- 컴퓨터의 전원을 켭니다.
3.3. 드라이버 설치
Upon system startup, the operating system may automatically detect and install generic drivers. For optimal performance and full functionality, it is recommended to install the latest drivers from the official Broadcom support website. Refer to the Broadcom website for specific driver download and installation instructions for your operating system.
4. 사용 설명서
4.1. 광섬유 케이블 연결
- Insert compatible QSFP56 transceivers (not included) into the two QSFP56 ports on the NIC.
- Connect the appropriate fiber optic cables to the transceivers. Ensure the cables are securely connected and match the type required by your transceivers and network infrastructure.
- Connect the other end of the fiber optic cables to your network switch or other network devices.
4.2. 네트워크 구성
After driver installation and cable connection, configure the network settings within your operating system. This typically involves:
- Accessing network adapter settings (e.g., Network and Sharing Center in Windows, Network Preferences in macOS, network configuration tools in Linux).
- Assigning IP addresses (DHCP or static).
- Configuring advanced settings such as Jumbo Frames, VLANs, or Link Aggregation if required by your network environment.
Consult your operating system's documentation or network administrator for detailed network configuration procedures.
5. 유지관리
5.1. 일반 관리
- Ensure adequate airflow within the computer case to prevent overheating.
- 카드를 극한의 온도나 습도에 노출시키지 마세요.
- Handle the card by its edges to prevent damage to components or static discharge.
5.2. 청소
Periodically inspect the card for dust accumulation, especially on the heatsink. If cleaning is necessary:
- Power off the system and disconnect the power cord.
- Use compressed air to gently remove dust from the heatsink and other components.
- 카드에 액체 세척제를 직접 사용하지 마십시오.
5.3. 펌웨어 업데이트
Broadcom may release firmware updates to improve performance, add features, or address issues. Check the official Broadcom support website periodically for available firmware updates and follow their instructions for safe installation.
6. 문제 해결
6.1. 일반적인 문제 및 해결 방법
- No Link Light / No Network Connectivity:
- Verify that the fiber optic cables are securely connected to both the NIC and the network device.
- Ensure the QSFP56 transceivers are correctly seated and compatible.
- Check network switch port status and configuration.
- 올바른 드라이버가 설치되고 업데이트되었는지 확인하세요.
- 네트워크 속도가 느립니다:
- Ensure the NIC is installed in a PCI Express 4.0 x16 slot for full bandwidth.
- Verify that the network infrastructure (switch, cables, transceivers) supports 100 Gb/s.
- 드라이버 업데이트를 확인하세요.
- Monitor CPU and memory usage on the host system.
- 드라이버 설치 문제:
- Download drivers directly from the Broadcom support web대지.
- Ensure compatibility with your operating system version.
- 드라이버 설치 중 충돌이 발생할 경우, 바이러스 백신 소프트웨어를 일시적으로 비활성화하십시오.
문제가 지속될 경우 브로드컴 지원팀에 문의하십시오. web사이트 또는 기술 지원팀에 문의하세요.
7. 사양
| 상표 | 브로드컴 |
| 모델 번호 | BCM957508-P2100G |
| 연결 기술 | 열광한 |
| 호스트 인터페이스 | PCI 익스프레스 4.0 x16 |
| 인터페이스 | Fiber (QSFP56) |
| 최대 데이터 전송 속도 | 100000 Mbit/s (100 Gb/s) |
| 포트 | Dual QSFP56 |
| 운영 체제 지원 | 윈도우, 맥OS, 리눅스 |
| 호환 장치 | 데스크탑 |
| 제품 크기(LxWxH) | 19.69 x 19.69 x 11.02 인치 |
| 품목 무게 | 1파운드(16온스) |
| 한국어: | 650861000291 |
8. 보증 및 지원
8.1. 보증 정보
Broadcom products are covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your BCM957508-P2100G Network Interface Card, please refer to the warranty documentation provided with your purchase or visit the official Broadcom web대지.
8.2. 기술 지원
For technical assistance, driver downloads, firmware updates, and additional product documentation, please visit the official Broadcom support web대지. NS website provides resources such as FAQs, knowledge bases, and contact information for customer support.
