1. 제품 오버view
The RESTMO High Pressure Hose Nozzle Sprayer is designed for various outdoor watering and cleaning tasks. It features a durable metal construction, adjustable spray patterns, and convenient thumb flow control.

Figure 1: RESTMO High Pressure Hose Nozzle Sprayer
주요 구성 요소

Figure 2: Labeled diagram showing the Pure Brass Head, Rubber Anti-Slip Dial, Thumb Flow Controller, Ergonomics TPU Handle, 3/4" Leak-free Hose Thread, and Replacement Rubber Seal Gaskets.
- Pure Brass Head: Provides durability and precise spray.
- Rubber Anti-Slip Dial: Allows for easy adjustment of spray patterns.
- Thumb Flow Controller: Enables convenient water flow adjustment and shut-off.
- Ergonomics TPU Handle: Designed for comfortable grip and reduced hand fatigue.
- 3/4" Leak-free Hose Thread: Ensures a secure connection to standard garden hoses.
- Replacement Rubber Seal Gaskets: Included for maintaining a watertight seal.
2. 설정 및 설치
Follow these steps to properly connect your RESTMO hose nozzle to a standard garden hose:
- Ensure your garden hose has a standard 3/4" thread.
- Check that a rubber seal gasket is properly seated inside the nozzle's hose thread connection. This helps prevent leaks.
- Screw the nozzle onto the end of your garden hose by turning it clockwise until it is hand-tight. Do not overtighten.
- Turn on the water supply to the hose and check for any leaks at the connection point. If a leak occurs, tighten slightly or ensure the gasket is correctly positioned.

Figure 3: Securely attaching the nozzle to a standard garden hose.
3. 사용 설명서
3.1 분사 패턴 조정
The RESTMO nozzle offers 4 distinct spray patterns. To change the spray pattern, rotate the rubber anti-slip dial at the head of the sprayer. Turn the dial until you achieve the desired pattern:
- 제트기 : A powerful, concentrated stream for cleaning tough dirt or reaching distant areas.
- 안개: A fine, gentle spray ideal for watering delicate plants and seedlings.
- 원뿔: A wider, conical spray suitable for general watering and rinsing.
- 가득한: A robust, full-coverage spray for quick watering or filling buckets.

Figure 4: Rotate the sprayer head dial to select one of the 4 available water patterns.
3.2 Controlling Water Flow
The nozzle features a thumb flow controller for easy adjustment of water pressure and for turning the water on and off.
- To turn the water on, push the thumb control forward.
- To increase water flow and pressure, continue pushing the thumb control forward towards the 'MAX' position.
- To decrease water flow and pressure, pull the thumb control backward.
- To turn the water off, pull the thumb control all the way back to the 'OFF' position.

Figure 5: The anti-slip thumb flow control allows for precise adjustment of water flow.
3.3 사용 예amp레
The versatile spray patterns and high-pressure capability make this nozzle suitable for various applications:
- 세차: Use the cone or jet pattern for effective cleaning of vehicles.
- 정원 청소: The powerful jet spray can assist in cleaning patios, driveways, and outdoor floors.
- Lawn and Plant Watering: The mist and cone patterns provide gentle and efficient watering for lawns, plants, and flower beds.

그림 6: 예amples of high-pressure jet use for cleaning various surfaces.
4. 유지관리
Proper maintenance will extend the life of your RESTMO hose nozzle:
- 청소: After each use, rinse the nozzle with clean water to remove any dirt or debris, especially from the spray head.
- 저장: Store the nozzle in a dry, shaded area when not in use. Protect it from freezing temperatures, which can damage internal components.
- 개스킷 검사: Periodically inspect the rubber seal gasket for wear or damage. Replace if necessary using the provided spare gaskets to maintain a leak-free connection.
5. 문제 해결
If you encounter issues with your hose nozzle, refer to the following common problems and solutions:
- Water Leakage at Hose Connection:
- 노즐이 호스에 단단히 고정되었는지 확인하십시오.
- Check if the rubber seal gasket is present and properly seated within the nozzle's connector. Replace the gasket if it is worn or damaged.
- Weak or Inconsistent Spray:
- Verify that the water supply to the hose is fully open.
- Check for any blockages in the nozzle head. Clean any visible debris.
- Ensure the thumb flow controller is pushed fully forward to the 'MAX' position for maximum pressure.
- Difficulty Adjusting Spray Patterns:
- Rinse the nozzle head to remove any grit or mineral deposits that might be hindering rotation.
6. 사양
| 상표 | 레스트모 |
| 모델 번호 | O-HN-3M-BK1 |
| 재료 | Zinc Alloy, Brass |
| 색상 | 검은색 |
| 스타일 | High Pressure-4 Spray Patterns |
| 품목 무게 | 11.7 온스 |
| 제품 크기(L x W x H) | 4 x 1.5 x 7.2 인치 |
| 입구 연결 크기 | 0.75 인치 |
| 포함된 구성 요소 | 호스 노즐 |
7. 보증 및 지원
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Restmo web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.





