Reloop RT-1 BT Turntable User Manual

1. 소개 및 이상view

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. 안전 지침

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• 전원 공급 장치: 제공된 전원 어댑터만 사용하세요. 볼륨을 확인하세요.tage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• 물과 습기: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• 통풍: Ensure adequate ventilation. Do not block ventilation openings. Install the unit according to the manufacturer's instructions.
• 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
• 청소: 마른 천으로만 닦으십시오. 액체 또는 스프레이형 세척제 사용은 피하십시오.
• 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오. 전원 코드나 플러그가 손상된 경우, 액체를 쏟았거나 이물질이 기기 안으로 들어간 경우, 기기가 비나 습기에 노출된 경우, 정상적으로 작동하지 않는 경우 또는 기기를 떨어뜨린 경우 등 기기가 어떤 식으로든 손상된 경우에는 수리가 필요합니다.
• 놓기: 진동을 방지하고 정상적인 작동을 위해 턴테이블을 안정적이고 평평한 표면에 놓으십시오.

3. 패키지 내용

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• 알루미늄 플래터
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• 헤드 쉘
• 펠트 매트
• Dust Cover (removable acrylic)
• 균형추
• 오디오 케이블(RCA)
• Center Adapter (for 45 RPM records)
• 전원 공급 장치
• 사용 설명서

4. 설정

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 포장 풀기 및 배치

1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 플래터 및 벨트 설치

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. 플래터 위에 펠트 매트를 놓습니다.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 톤암 및 카트리지 설치

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Adjust the anti-skating dial to match the tracking force setting.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 오디오 연결

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your amp이 앰프에는 전용 포노 입력 단자가 있습니다.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your amp전원 공급기 또는 전원 스피커.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your amplifier의 입력.

이미지: 후면 view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 전원 연결

1. Connect the power supply unit to the DC input on the turntable.
2. 전원 어댑터를 적합한 벽면 콘센트에 꽂으세요.

5. 사용 설명서

This section details how to operate your Reloop RT-1 BT turntable.

5.1 레코드 재생하기

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. 턴테이블 회전을 시작하려면 시작/정지 버튼을 누르십시오.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. 재생을 멈추려면 큐잉 레버를 사용하여 톤암을 들어 올린 다음 톤암 받침대로 되돌리고 시작/정지 버튼을 누르십시오.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 피치 조정

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 블루투스 연결

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. 유지관리

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• 장치 청소: Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• 스타일러스 관리: Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• 먼지 커버: 턴테이블을 사용하지 않을 때는 먼지와 이물질로부터 보호하기 위해 먼지 덮개를 닫아 두십시오.
• 벨트 검사: Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

7. 문제 해결

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. 사양

9. 보증 및 지원

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.