PowerA Enhanced Wireless Controller with Lumectra for Nintendo Switch - 사용 설명서

소개

This manual provides comprehensive instructions for the PowerA Enhanced Wireless Controller with Lumectra, designed for use with Nintendo Switch and Switch 2 consoles. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

주요 특징

• Multi-Zone RGB Lighting: Customize your controller with 24 different colors, 4 individual lighting zones, and 3 distinct lighting modes (Breathing, Solid, Cycle) for thousands of unique combinations.
• 고급 게임 버튼: Two mappable buttons located on the back of the controller allow for on-the-fly programming, providing a competitive edge without needing to access system settings.
• 충전식 배터리: An internal rechargeable battery offers up to 20 hours of gameplay on a single charge. An extra-long 10 ft. USB-C cable is included for convenient charging while playing.
• 무선의 자유: Enjoy seamless wireless gameplay with Nintendo Switch – OLED Model, Nintendo Switch, and Nintendo Switch Lite.
• Immersive Motion Controls: Experience fluid and responsive motion controls, enhancing gameplay for titles that support aiming, steering, and flying.
• 인체공학적 디자인: Engineered for comfort during extended gaming sessions, featuring super-comfortable ergonomics and a textured grip.

설정

컨트롤러 페어링

1. Nintendo Switch 콘솔의 전원이 켜져 있고 최신 시스템 소프트웨어로 업데이트되어 있는지 확인하세요.
2. 홈 메뉴에서 "컨트롤러" > "그립/순서 변경"을 선택하세요.
3. On the PowerA Enhanced Wireless Controller, press and hold the SYNC Button (located on the top edge of the controller, near the USB-C port) for at least three seconds. The player indicator LEDs will begin to flash.
4. Once paired, the player indicator LED(s) corresponding to the controller number will remain lit.
5. If pairing fails, ensure the controller is charged and try again.

초기 요금

Before first use, fully charge the controller using the included USB-C cable. Connect the USB-C end to the controller and the USB-A end to a powered USB port (e.g., Nintendo Switch dock, USB wall adapter). The charging indicator LED will show charging status.

작동 지침

기본 제어

The controller features a standard Nintendo Switch button layout, including A, B, X, Y buttons, a D-pad, Left and Right Analog Sticks, L/R/ZL/ZR shoulder buttons, HOME, Capture, Plus (+), and Minus (-) buttons. Additionally, it includes two mappable Advanced Gaming Buttons (AGL/AGR) on the back.

Customizing RGB Lighting (Lumectra)

The Lumectra RGB lighting system allows for extensive customization:

• 색상 변경: To change the color of a specific lighting zone, press and hold the dedicated Lumectra button (refer to your controller's specific layout for its location, often on the back or bottom). While holding, press the button associated with the zone you wish to customize (e.g., A, B, X, Y, D-pad, or analog stick) to cycle through available colors.
• 조명 모드: The controller supports three dynamic lighting modes: Breathing (fading in and out), Solid (constant color), and Cycle (automatically rotating through colors). Consult the detailed instructions provided with your controller for the specific button combinations required to switch between these modes.
• Individual Zone Customization: The controller is equipped with 4 individual lighting zones, allowing you to customize each zone independently for a personalized aesthetic.

고급 게임 버튼 프로그래밍

The two Advanced Gaming Buttons (AGL and AGR) on the back of the controller can be programmed to replicate other button inputs on the fly:

1. Press and hold the Program Button (typically a small button on the back of the controller). The Program LED will begin to flash.
2. Press the Advanced Gaming Button (AGL or AGR) you wish to program. The Program LED will start flashing rapidly.
3. Press the standard button you want to map to the Advanced Gaming Button (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad directions, or analog stick clicks). The Program LED will flash three times to indicate successful programming.
4. To clear a programmed button, repeat steps 1 and 2, then press the Program Button again.

유지

배터리 충전

The controller is equipped with an internal rechargeable battery. To charge, connect the included USB-C cable to the controller's USB-C port and the other end to a powered USB source. The charging indicator LED will illuminate while charging and turn off once fully charged. A complete charge typically takes approximately 20-30 minutes, providing up to 20 hours of gameplay. Actual battery life may vary based on usage patterns and RGB lighting settings.

청소

To clean the controller, use a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaning materials, as these can damage the controller's finish and internal components.

저장

Store the controller in a cool, dry environment, away from direct sunlight, extreme temperatures, and excessive humidity. Proper storage helps prolong the lifespan of the device.

문제 해결

컨트롤러가 연결/페어링되지 않습니다

• 컨트롤러가 완전히 충전되었는지 확인하세요.
• Verify that your Nintendo Switch console is updated to the latest system software version.
• Re-attempt the pairing process as detailed in the "Setup" section.
• Check for potential wireless interference from other electronic devices in the vicinity.

RGB 조명이 작동하지 않음

• Confirm that the controller is powered on.
• Review the "Customizing RGB Lighting" section for the correct button combinations to activate and modify lighting effects.
• If the issue persists, consider performing a controller reset (refer to the full product manual for specific reset instructions, if available).

짧은 배터리 수명

• Battery life can vary significantly based on usage intensity, especially when RGB lighting is active.
• Always ensure the controller is fully charged before each use.
• To conserve battery, reduce RGB brightness or disable lighting effects when not desired.

Motion Controls Not Responding

• Verify that the game you are playing supports motion controls.
• Re-pair the controller with your Nintendo Switch console.
• If necessary, calibrate motion controls through the Nintendo Switch system settings.

명세서

보증 및 지원

PowerA products are engineered for quality and reliable performance. For detailed warranty information, technical support, or to register your product, please visit the official PowerA web해당 웹사이트를 방문하거나 고객 서비스 부서에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하는 것이 좋습니다.

Visit PowerA Support