1. 제품 오버view
The JBL Studio 680 is a 2.5-way floorstanding loudspeaker designed for high-fidelity audio reproduction. It features advanced acoustic technologies to deliver clear and dynamic sound for home entertainment systems.
이미지 1.1: 앞면 view of the JBL Studio 680 Floorstanding Loudspeaker. This image displays the speaker's elegant dark wood cabinet and the arrangement of its drivers.
주요 특징:
- 2414H-1 Compression Driver: Provides clear and detailed high-frequency sound.
- High-Definition Imaging (HDI) Horn: Ensures precise sound dispersion and a wide listening sweet spot.
- Dual 6.5-inch PolyPlas Cone Woofers: Delivers powerful and accurate bass response.
- 우아한 디자인: Features a dark wood cabinet with a magnetically attached grille.
Image 1.2: Graphic illustrating key features of the JBL Studio 680, including PolyPlas cones, compression drivers, and High-Definition Imaging waveguide.
이미지 1.3: 클로즈업 view of the JBL 2414H-1 compression driver and the High-Definition Imaging (HDI) waveguide, highlighting their design.
2. 설정 및 설치
2.1 풀기
Carefully remove the loudspeaker from its packaging. Retain all packing materials for future transport or storage.
2.2 상자 내용물
- 1 x JBL Studio 680 Floor Standing Loudspeaker
- 1 x 사용 설명서(이 문서)
- 1 x 보증 카드
- 4 x 카펫 스파이크
- 4 x Feet Pads
2.3 스피커 배치
Optimal speaker placement is crucial for sound quality. Position the loudspeakers equidistant from your primary listening position. For stereo imaging, ensure the speakers are placed symmetrically in the room. Avoid placing speakers directly in corners, which can overemphasize bass frequencies. Experiment with toe-in (angling speakers towards the listening position) to find the best soundstage.
Attach the included carpet spikes for stability on carpeted surfaces or feet pads for hard floors. This helps to decouple the speaker from the floor, reducing unwanted vibrations.
2.4 연결 Amp리시버/리시버
The JBL Studio 680 is a passive loudspeaker and requires an external amplifier or AV receiver for operation. Ensure your amp연결을 하기 전에 lifier를 꺼야 합니다.
- Use high-quality speaker cables to connect the loudspeaker to your amp리퍼.
- Connect the positive (+) terminal (red) on the loudspeaker to the positive (+) terminal on your amp리퍼.
- Connect the negative (-) terminal (black) on the loudspeaker to the negative (-) terminal on your amp리퍼.
- Ensure all connections are secure to prevent short circuits or signal loss.
이미지 2.1: 전면 및 후면 views of the JBL Studio 680 loudspeaker. The rear view shows the speaker terminals for connecting to an amp리퍼.
3. 사용 설명서
Once the loudspeakers are properly connected to your amplifier or AV receiver, you can begin playback.
- 모든 연결이 정확하고 안전한지 확인하십시오.
- 켜세요 amplifier/receiver and select the desired audio input source.
- Start playback from your audio source (e.g., CD player, streaming device, turntable).
- 점차적으로 볼륨을 높이십시오. amplifier/receiver to a comfortable listening level.
The JBL Studio 680 loudspeakers are designed for optimal performance with a wide range of audio content. Avoid excessively high volumes for prolonged periods to prevent potential damage to the speakers or hearing.
4. 관리 및 유지 보수
Proper care will ensure the longevity and performance of your JBL Studio 680 loudspeakers.
- 캐비닛 청소: 부드럽고 마른 천으로 캐비닛 표면을 닦으세요. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아주세요.amp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners, solvents, or strong chemicals.
- 그릴 관리: The speaker grilles are magnetically attached. They can be gently removed for cleaning. Use a soft brush or a lint roller to remove dust.
- 운전자 보호: 스피커 콘이나 트위터를 직접 만지지 마십시오. 손상될 수 있습니다.
- 환경 조건: Do not expose the loudspeakers to extreme temperatures, humidity, or direct sunlight for extended periods.
5. 문제 해결
If you experience issues with your JBL Studio 680 loudspeakers, consult the following common troubleshooting steps:
스피커에서 소리가 나지 않습니다:
- 확인해주세요 amp수신기의 전원이 켜져 있고 올바른 입력 소스가 선택되어 있습니다.
- Check all speaker cable connections at both the loudspeaker and the amplifier. Ensure they are secure and correctly matched (positive to positive, negative to negative).
- 볼륨이 제대로 설정되어 있는지 확인하세요 amp수신기/발신기가 최소 또는 음소거로 설정되어 있지 않습니다.
- Test with another audio source or another set of speakers (if available) to isolate the problem.
소리가 왜곡되거나 불분명함:
- 볼륨 레벨을 줄이세요 amplifier/receiver. Distortion can occur if the amp리파이어가 오버드라이브되었습니다.
- 단락을 일으킬 수 있는 느슨한 가닥이 있는지 스피커 케이블 연결부를 확인하세요.
- Ensure the audio source is clean and not distorted.
- Verify that the speaker grilles are not obstructing the drivers or vibrating.
Unbalanced Sound (One Speaker Louder/Softer):
- 잔액 설정을 확인하세요. amp리시버/리시버.
- Inspect speaker cable connections for both speakers to ensure they are identical and secure.
- Ensure both speakers are connected to the correct left/right channels on the amp리퍼.
If these steps do not resolve the issue, contact JBL customer support for further assistance.
6. 사양
Detailed technical specifications for the JBL Studio 680 Floorstanding Loudspeaker:
| 모델명 | S680 Dark Wood (Ea) |
| 스피커 유형 | 플로어 스탠딩 |
| 제품 크기(D x W x H) | 11.81인치 깊이 x 9.05인치 너비 x 39.56인치 높이 |
| 품목 무게 | 22.6킬로그램(49.7파운드) |
| 임피던스 | 6옴 |
| 스피커 최대 출력 전력 | 150 와트 |
| 우퍼 직경 | 6.5 인치 |
| 트위터 직경 | 1 인치 |
| 오디오 드라이버 유형 | 동적 드라이버 |
| 연결 기술 | Bluetooth (Note: This refers to the product's general feature set, but the speaker itself is passive and connects via speaker wire to an amplifier. The Bluetooth feature might refer to a compatible JBL ecosystem component, or it's a general spec that doesn't directly apply to the passive speaker's connection.) |
| 색상 | 다크우드 |
| 재료 | 합성물 |
| 제조업체 | 제이비엘 |
| 품목 모델 번호 | JBLS680DKWS |
| 한국어: | 050036392334 |
Image 6.1: Diagram showing the dimensions of the JBL Studio 680 Floorstanding Loudspeaker: 39.56 inches high, 11.81 inches deep, and 9.05 inches wide.
7. 보증 및 지원
7.1 보증 정보
The JBL Studio 680 Floorstanding Loudspeaker comes with a Limited Warranty. Please refer to the included Warranty Card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
7.2 고객 지원
For technical assistance, service, or further inquiries, please contact JBL customer support. Contact information can typically be found on the JBL official web해당 사이트 또는 제품과 함께 제공된 보증 카드에서 확인하세요.
You can also visit the official JBL Store for more information: Amazon의 JBL 스토어.
