소개
Thank you for choosing the Anmytek Black 3-Drawer Dresser. This modern and elegant chest of drawers is designed to provide spacious storage and enhance the aesthetic of your bedroom, living room, or hallway. Crafted with a stable structure and quality materials, it offers a reliable storage solution for your home. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure a smooth and enjoyable experience with your new furniture.
안전 정보
본 제품을 조립하거나 사용하기 전에 모든 안전 정보를 읽고 숙지해 주십시오. 이 지침을 따르지 않을 경우 부상이나 손해가 발생할 수 있습니다.
- 전복 위험: Furniture tip-overs can cause serious or fatal crushing injuries. To prevent tip-over, this product must be securely attached to the wall using the provided anti-tip wall anchor.
- Always place the dresser on a flat, stable, and level surface.
- 어린이들이 서랍장 위에 올라가거나 서랍장을 가지고 놀지 못하게 하십시오.
- 한 번에 두 개 이상의 서랍을 열지 마십시오. 넘어지는 것을 방지할 수 있습니다.
- 서랍에 무게를 고르게 분산시키세요. 무거운 물건은 아래쪽 서랍에 넣으세요.
- 작은 부품과 포장재는 어린이의 손이 닿지 않는 곳에 보관하세요.
- 조립은 최소 두 명의 성인이 수행해야 합니다.
Image: Anti-Tip Wall Anchor and Back Clip for stability.
패키지 내용
조립을 시작하기 전에 모든 부품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 고객 지원 센터로 문의하십시오.
- 서랍장 패널 (상단, 하단, 측면, 후면)
- 서랍 패널(앞면, 뒷면, 측면, 바닥면)
- 금속 다리와 지지 프레임
- Golden Hardware Handles
- 서랍 슬라이드
- 조립 하드웨어(나사, 다웰, 캠 잠금 장치 등)
- Anti-Tip Wall Anchor Kit
- 사용 설명서
조립 설명서
Assembly typically takes approximately 1-2 hours with two people. Follow these general steps for assembly. Refer to the detailed diagrams included in your physical package for specific part identification and screw placement.
- 지역 준비: Clear a spacious, clean, and soft surface (like a carpet) to prevent scratching the furniture during assembly.
- 금속 다리 부착: Secure the golden metal legs and support frame to the bottom panel of the dresser using the provided screws. Ensure they are tightly fastened for stability.
- 프레임 조립: Connect the side panels to the bottom and top panels using cam locks and dowels. Ensure all connections are secure.
- 서랍 슬라이드 설치: Attach the drawer slides to the inner sides of the dresser frame and to the side panels of each drawer. Ensure they are aligned correctly for smooth operation.
- 서랍 조립: Construct each of the three drawers by connecting the front, back, and side panels. Slide the drawer bottom into the grooves.
- 손잡이 부착: Secure the golden hardware handles to the front of each drawer.
- 서랍 삽입: Carefully slide the assembled drawers into the dresser frame, ensuring they glide smoothly on the installed slides.
- 후면 패널 설치: Attach the back panel to the dresser frame using small nails or screws. This adds rigidity and stability.
- 넘어짐 방지 키트로 고정: Attach the anti-tip wall anchor to the top rear of the dresser and to a wall stud using the provided hardware. This is a critical safety step.
Image: Detailed dimensions of the dresser and its drawers, showing an open drawer.
이미지: 클로즈업 view highlighting the convenient golden handles, smooth drawer slides, and solid metal legs.
작동 지침
The Anmytek 3-Drawer Dresser is designed for easy and functional use.
- 서랍 사용법: Gently pull the golden handles to open the drawers. The smooth drawer slides ensure effortless operation. Push firmly to close.
- 중량 용량: The top surface of the dresser has a load capacity of approximately 100 lbs. Each drawer has a load capacity of approximately 50 lbs. Do not exceed these limits to prevent damage or instability.
- 다양한 배치: This dresser can be used in various rooms, including bedrooms, living rooms, and hallways, serving as a storage vanity, TV stand, or general organizer.
Image: The dresser with its three spacious drawers partially open, demonstrating amp다양한 품목을 보관할 수 있는 용량.
Image: Visual representation of the dresser's versatility, showing it used in a living room, bedroom, and hallway.
유지
Proper care will help maintain the appearance and longevity of your Anmytek dresser.
- 청소: 표면을 마른 부드러운 천으로 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 독한 화학 물질은 사용하지 마십시오.
- 유출: Immediately wipe up any spills with a clean, dry cloth to prevent moisture damage.
- 하드웨어: Periodically check and tighten all screws and fasteners to ensure the dresser remains stable.
- 햇빛 노출: 마감재의 퇴색이나 변색을 방지하려면 직사광선에 장시간 노출시키지 마십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 서랍장이 흔들거려요/불안정해요. | 나사가 헐거워졌거나, 바닥이 고르지 않거나, 조립이 잘못되었을 수 있습니다. | Ensure all screws and cam locks are tightened. Place on a level surface. Recheck assembly steps. Ensure anti-tip kit is installed. |
| 서랍이 매끄럽게 미끄러지지 않습니다. | Misaligned drawer slides; obstruction in slides; overloaded drawer. | Check alignment of drawer slides on both the drawer and the dresser frame. Remove any debris. Reduce weight in the drawer. |
| 서랍이 완전히 닫히지 않습니다. | Obstruction at the back of the drawer; misaligned slides. | Check for items blocking the back of the drawer. Verify drawer slide alignment. |
| 표면에 긁힌 자국이나 얼룩이 있음. | 날카로운 물체; 연마 세척. | Use coasters or protective pads for items on the top surface. Use only soft, dry cloths for cleaning. Minor scratches may be touched up with furniture repair pens. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 안미텍 |
| 모델 | H0073 |
| 색상 | 검은색 |
| 제품 치수(전체) | 31.5"D x 15.7"W x 29.5"H (80cm D x 40cm W x 75cm H) |
| Drawer Dimensions (Internal) | 28.4" x 11.4" x 6.9"(72cm x 29cm x 17cm) |
| 재료 | Particle Board, Coated Steel Tube Legs |
| 상단 적재 용량 | 100파운드 |
| 서랍 적재 용량 | 서랍당 50파운드 |
| 조립이 필요합니다 | 예 |
| 품목 무게 | 59.9파운드(27.22킬로그램) |
Image: The Anmytek Black 3-Drawer Dresser, showcasing its modern design and golden hardware.
보증 및 지원
Anmytek is committed to offering high-quality products and satisfactory after-sales services. For any problems or suggestions regarding your dresser, please feel free to contact us at any time. Refer to your purchase documentation for specific warranty details.
고객 지원을 받으시려면 다음 페이지를 방문하세요. Anmytek Store on Amazon.
