FR-TEC Racing Enhance SimRacing Kit for PS5 Instruction Manual

소개

The FR-TEC Racing Enhance SimRacing Kit is designed to enhance your PlayStation 5 DualSense controller for an improved sim racing experience. This kit provides accessories that increase precision, grip, and control, allowing for more immersive and responsive gameplay. Please read this manual carefully before installation and use to ensure proper setup and optimal performance.

패키지 내용

Verify that all the following components are included in your FR-TEC Racing Enhance SimRacing Kit:

• 1 x Silicone protective cover for the DualSense controller
• 2 x Concave thumb grips
• 2 x High-density foam rings
• 2 x Triggers (R2 + L2) with two operating modes
• 2 x Buttons (R1 + L1) caps
• 1 x Tool for removing R1 and L1 buttons

Image: All components of the FR-TEC Racing Enhance SimRacing Kit, including the silicone cover, thumb grips, foam rings, triggers, button caps, and removal tool.

설정 및 설치

Follow these steps to correctly install the FR-TEC Racing Enhance SimRacing Kit components onto your PS5 DualSense controller.

1. Silicone Protective Cover Installation

1. Ensure your DualSense controller is clean and dry.
2. Carefully stretch the silicone cover over the controller, aligning the openings with the buttons, joysticks, and ports.
3. Adjust the cover to ensure a snug fit without obstructing any functions.

2. Thumb Grips Installation

1. Place the concave thumb grips onto the analog sticks of your DualSense controller.
2. Press down firmly to ensure they are securely seated.

3. High-Density Foam Rings Installation

1. Gently slide one foam ring over each analog stick.
2. Position the foam ring between the base of the analog stick and the controller housing. These rings provide resistance for improved precision.

4. R1 and L1 Button Caps Installation

1. Use the provided removal tool to carefully pry off the original R1 and L1 buttons from your DualSense controller. Insert the tool into the small gap and gently lift.
2. Align the new R1 and L1 button caps with their respective slots.
3. Press down firmly until they click into place, ensuring they are flush and functional.

5. R2 and L2 Trigger Installation

1. Carefully remove the original R2 and L2 triggers from your DualSense controller. This may require gentle prying.
2. Align the new R2 and L2 triggers with their respective positions.
3. Press down until they securely snap into place.

Image: A PlayStation 5 DualSense controller with the FR-TEC Racing Enhance SimRacing Kit components, including the silicone cover, enhanced triggers, and thumb grips, fully installed.

작동 지침

The FR-TEC Racing Enhance SimRacing Kit is designed to be intuitive once installed. The primary operational feature is the adjustable R2 and L2 triggers.

R2 and L2 Trigger Modes

The enhanced R2 and L2 triggers offer two distinct operating modes:

• Precision Shooting Mode (Long Range): This mode allows for the full range of trigger travel, providing fine control and accuracy, ideal for nuanced acceleration or braking in racing games.
• Rapid Fire Mode (Short Range): This mode reduces the trigger travel distance, allowing for quicker, shorter presses. This can be beneficial for rapid inputs in certain game scenarios, though less common in sim racing.

To switch between modes, gently push or pull the small lever or switch located on the underside of each trigger. Refer to the visual cues on the triggers for the current mode setting.

유지

Proper care of your FR-TEC Racing Enhance SimRacing Kit will ensure its longevity and continued performance.

• 청소: The silicone cover, thumb grips, and trigger/button caps can be cleaned with a soft, damp 옷감. 가혹한 화학 물질이나 연마재를 사용하지 마십시오.
• 저장: When not in use, store your controller with the kit installed in a clean, dry environment away from direct sunlight or extreme temperatures.
• 점검: Periodically check all components for wear and tear. If any part becomes damaged, consider replacing it to maintain optimal performance.

문제 해결

If you encounter any issues with your FR-TEC Racing Enhance SimRacing Kit, please refer to the following common solutions:

• Buttons/Triggers Not Responding: Ensure all button caps and triggers are fully seated and clicked into place. Re-install if necessary.
• Silicone Cover Slipping: Ensure the controller and cover are dry before installation. Adjust the cover to ensure a tight fit.
• Analog Stick Resistance Issues: Verify that the foam rings are correctly positioned at the base of the analog sticks and are not interfering with movement.
• Difficulty Switching Trigger Modes: Ensure no debris is obstructing the trigger mechanism. Gently operate the switch.

If problems persist, carefully remove all kit components and test the controller without them to determine if the issue lies with the kit or the controller itself.

명세서

보증 및 지원

For information regarding warranty coverage or technical support for your FR-TEC Racing Enhance SimRacing Kit, please refer to the documentation provided with your purchase or visit the official FR-TEC web사이트. 구체적인 보증 조건은 지역 및 소매업체에 따라 다를 수 있습니다.