1. 서론
This manual provides essential instructions for the proper setup, operation, and maintenance of your Unitech MS652 Plus Wearable Ring Scanner. The MS652 Plus is a compact, high-performance 2D imager designed for efficient data collection in various environments. Its wearable design enhances user mobility and productivity.
Please read this manual thoroughly before using the device to ensure safe and optimal performance.
2. 패키지 내용
Verify that all items are present in your package. If any item is missing or damaged, contact your vendor immediately.
- Unitech MS652 Plus Wearable Ring Scanner
- Two-Finger Ring Strap
- USB 케이블(충전 및 데이터 전송용)
- Rechargeable Lithium Ion Battery (pre-installed or separate)
- 빠른 시작 가이드(해당되는 경우)
3. 제품 오버view
The Unitech MS652 Plus is engineered for comfort and efficiency, featuring a lightweight design and flexible connectivity options.
3.1 주요 특징
- Lightweight and unique wearable ring design for hands-free operation.
- One-push rotate design for easy switching between right and left-hand use.
- Wireless flexibility with up to 100M operation range via Bluetooth.
- Rugged construction with IP42 rating and 1.5m drop specification.
- Bluetooth Low Energy 4.2 / classic V2.1 Class1 and NFC technology for easy pairing with iOS/Android devices.
- Changeable and rechargeable battery pack providing up to 13 hours of full-shift operation.
- Mountable on two fingers or one finger for enhanced operational stability.
- Instant decoding feedback through LED, Buzzer, and Vibrator indicators.
- Companion "Unitech Scanner Utility" Android application for configuration and data retrieval (Android 5.0+).
3.2 장치 구성 요소
4. 설정
4.1 배터리 충전
- Connect the supplied USB cable to the Micro USB port on the scanner.
- Connect the other end of the USB cable to a power adapter or a computer's USB port.
- The charging indicator LED on the scanner will illuminate to show charging status. Allow approximately 3-4 hours for a full charge.
- A fully charged battery provides up to 13 hours of operation.
4.2 Attaching the Ring Strap
- Align the scanner module with the ring strap attachment points.
- Securely fasten the scanner to the strap. The design allows for rotation to accommodate both left and right-hand users.
- Adjust the strap to fit comfortably on one or two fingers, ensuring stability during use.
4.3 Pairing with a Host Device (Bluetooth)
The MS652 Plus can be paired with various host devices (smartphones, tablets, computers) via Bluetooth.
- 전원 켜기: Press and hold the power button on the scanner until it powers on.
- 페어링 모드 시작: Refer to the Quick Start Guide or the scanner's specific pairing barcode (usually found in the full manual or on a setup card) to put the scanner into Bluetooth pairing mode. The Bluetooth indicator LED will typically flash.
- 호스트 장치에서 블루투스를 활성화하세요. 스마트폰, 태블릿 또는 컴퓨터에서 블루투스 설정으로 이동하여 블루투스가 활성화되어 있는지 확인하십시오.
- 기기 검색: Your host device will search for available Bluetooth devices. Select "Unitech MS652 Plus" (or similar name) from the list.
- 페어링 확인: Follow any on-screen prompts to confirm the pairing. Once successfully paired, the Bluetooth indicator LED on the scanner will typically turn solid.
- NFC Pairing (if supported by host device): For devices with NFC, simply tap the scanner against the NFC area of your host device to initiate pairing.
For advanced configuration and management on Android devices, download the "Unitech Scanner Utility" application from the Google Play Store.
5. 사용 설명서
5.1 바코드 스캐닝
- Ensure the scanner is powered on and successfully paired with your host device.
- 스캐너의 이미지 창을 스캔하려는 바코드에 향하게 하십시오.
- Press the trigger button (usually located on the side or top of the scanner).
- A successful scan will be indicated by an audible beep, a vibrator feedback, and an LED indicator. The decoded data will be transmitted to your host device.
- Adjust the distance and angle to the barcode for optimal scanning performance. The scanner supports 1D and 2D barcodes.
5.2가지 작동 모드
The MS652 Plus supports several operation modes to suit different workflows:
- 트리거 모드 : Requires a manual press of the trigger button for each scan.
- 프레젠테이션 모드: The scanner continuously looks for barcodes and scans them automatically when presented within its field of view.
- 자동 모드 : Similar to presentation mode, but may have specific triggers or conditions for automatic scanning.
- 배치 모드: Scans and stores barcodes in the scanner's internal memory (7.5MB) when not connected to a host device. Data can be uploaded later.
Refer to the full user manual or the "Unitech Scanner Utility" for instructions on how to switch between these modes.
6. 유지관리
6.1 스캐너 청소
- 청소하기 전에 스캐너의 전원이 꺼져 있는지 확인하십시오.
- 부드럽고 보풀이 없는 천을 살짝 사용하십시오. dampened with water or a mild, non-abrasive cleaning solution to wipe the exterior.
- For the scanning window, use a lens cleaning cloth or a cotton swab with a small amount of lens cleaner. Avoid harsh chemicals or abrasive materials that could scratch the lens.
- 스캐너를 어떠한 액체에도 담그지 마십시오.
6.2 배터리 관리 및 교체
- Always use the original Unitech battery and charging cable.
- 배터리를 극한의 온도에 노출시키지 마십시오.
- If the battery needs replacement, ensure the scanner is powered off. Carefully remove the old battery and insert a new, genuine Unitech replacement battery. Dispose of old batteries according to local regulations.
6.3 펌웨어 업데이트
Periodically check the Unitech website for firmware updates for your MS652 Plus scanner. Firmware updates can improve performance, add new features, or resolve issues. Follow the instructions provided with the firmware update package carefully.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스캐너의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 제대로 삽입되지 않았습니다. | 배터리를 충전하십시오. 배터리가 올바르게 장착되었는지 확인하십시오. |
| 호스트 장치와 페어링할 수 없습니다. | Bluetooth is off on host device; scanner not in pairing mode; out of range. | Ensure Bluetooth is enabled. Put scanner in pairing mode. Move scanner closer to host device. Restart both devices. |
| 스캐너가 바코드를 읽지 못합니다. | Barcode damaged or poor quality; scanner lens dirty; incorrect symbology enabled; scanner not in correct mode. | Try scanning a different barcode. Clean the scanner lens. Check scanner configuration for enabled symbologies. Ensure scanner is in Trigger or Presentation mode. |
| 스캔한 데이터가 잘못되었거나 불완전합니다. | Poor barcode quality; incorrect data formatting settings. | Ensure barcode is clear. Check scanner configuration for data formatting rules (e.g., prefixes, suffixes). |
| 배터리 수명이 짧습니다. | Battery degradation; frequent use; high power consumption settings. | Ensure battery is fully charged. Consider replacing the battery if it's old. Adjust power-saving settings if available. |
If the problem persists after attempting these solutions, please contact Unitech technical support or your vendor for further assistance.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | MS652 플러스 |
| 스캐너 유형 | 2D Imager (CMOS sensor, 640 x 400 pixels) |
| Aiming Element | 1 Hyper Red 660nm LED |
| 주변광 | Max 107,639 lux (direct sunlight) |
| 연결성 | Bluetooth Low Energy 4.2 / classic V2.1 Class1, NFC |
| 호스트 인터페이스 | 마이크로 USB |
| 메모리 | 7.5MB (for batch mode) |
| 배터리 | 1 Lithium Ion battery (included), up to 13 hours operation |
| 내구성 | IP42 rated, 1.5m drop specification |
| 치수 | 2.8 x 2 x 0.8 인치 |
| 품목 무게 | 8.3 온스 |
| 지원되는 1D 바코드 | All major symbologies and PDF417 |
| 지원되는 2D 바코드 | QR Code, Data Matrix, Aztec Code, PDF417, Macro PDF417, Micro PDF417, MaxiCode, Codablock A, Codablock F, GS1 Composite, Han XinCode, Australian Post, British Post, Canadian Post, InfoMail, Intelligent Mail Bar Code, Japanese Post, KIX (Netherlands) Post, KoreaPost, Planet Code, Postal, Postnet |
| 최소 시스템 요구 사항 | Windows 7 (for PC connection) / Android 5.0+ (for utility app) |
9. 보증 및 지원
Unitech products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech web대지.
For technical support, troubleshooting assistance, or service inquiries, please contact Unitech customer support through their official web사이트 또는 제품 설명서에 제공된 연락처 정보를 참조하세요.
제조업체: 유니텍
