소개
This user manual provides comprehensive instructions for the KOSUMOSU 9.7-inch 3D LED Digital Wall Clock. It covers product features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed specifications. Please read this manual thoroughly before using the device to ensure proper function and longevity.
Image: The KOSUMOSU 3D LED Digital Wall Clock displaying "88:88" with its remote control positioned in front.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- KOSUMOSU 9.7-inch 3D LED Digital Wall Clock
- Remote Control (with CR2025 button battery pre-installed)
- 3-meter USB Power Cable
- 데스크탑 브래킷
- Wall Mounting Accessories (screws, anchors)
- 사용자 설명서
Note: A 5V/1A USB-A power adapter is NOT included and is required for operation.
Image: A flat lay of the product packaging, including the 3D LED clock, remote control, USB cable, desktop stand, and mounting hardware.
제품 특징
- 대형 9.7인치 LED 디스플레이: Clear and easy-to-read digital time, date, and temperature.
- 다양한 배치: Can be used as a wall clock or a desktop/table clock with the included stand.
- 조정 가능한 밝기: Features 3 levels of manual dimming (High/Medium/Low) via remote control.
- 자동 디밍: Built-in light sensor provides 8 levels of automatic brightness adjustment based on ambient light.
- 다기능 디스플레이 : Loops between time, date, and temperature (Celsius/Fahrenheit).
- 알람 시계 (스누즈 기능 포함): Easy-to-set alarm with a 5-minute snooze function (up to 3 times).
- 원격 제어 작동: All settings are conveniently adjusted using the included remote.
- 시간 기억: Built-in super farad capacitor provides approximately 2 hours of time memory during power outages (not for continuous power supply).
Image: The clock displayed in a living room as a wall clock and on a desk, illustrating its versatility for day and night use.
Image: The clock demonstrating its loop display feature, cycling between current time, date (September 5th), and temperature (59°F).
설정
- 전원 연결: Connect the provided USB power cable to the clock's power input port. Plug the other end into a 5V/1A USB-A power adapter (not included) and then into a wall outlet. The clock will power on and display the time.
- 리모컨 배터리: The remote control comes with a pre-installed CR2025 button battery. Ensure the transparent insulation sheet is removed from the battery compartment before first use.
- 놓기:
- 데스크톱 사용: Attach the included desktop bracket to the bottom of the clock for stable placement on a table or desk.
- 벽면 장착: Use the integrated hanging holes on the back of the clock. Mark the desired position on the wall, drill holes, insert anchors, and secure with screws. Hang the clock securely.
Image: A remote control being aimed at the infrared sensor located at the bottom of the clock, indicating the correct way to operate the remote.
이미지: 후면 view of the clock, highlighting the three function buttons (minus, plus, set) and the keyhole slots for wall mounting.
작동 지침
시간 및 날짜 설정
- 를 누르세요 시계 리모컨의 버튼을 누르세요.
- 사용하세요 업(▲) 그리고 아래로 (▼) arrow buttons to adjust the hour.
- 를 누르세요 RIGHT (▶) arrow button to move to minutes, then use 업(▲) 그리고 아래로 (▼) 조정하다.
- 계속 누르기 RIGHT (▶) 연도, 월, 일 설정을 순환하며 각각을 조정합니다. 업(▲) 그리고 아래로 (▼).
- 누르다 시계 again to save settings and exit.
Adjusting Brightness (Manual & Automatic)
- 수동 디밍: 를 누르세요 밝은 button on the remote control to cycle through 3 levels: High, Medium, Low.
- 자동 디밍: The clock has a built-in light sensor. It will automatically adjust brightness across 8 levels based on ambient light. This feature is always active.
Image: The clock displaying different brightness levels (Auto, Low, Medium, High) and highlighting the light sensor for automatic dimming.
Setting Alarm & Snooze
- 를 누르세요 경보 리모컨의 버튼을 누르세요.
- 사용하세요 업(▲) 그리고 아래로 (▼) arrow buttons to set the desired alarm hour.
- 를 누르세요 RIGHT (▶) arrow button to move to minutes, then adjust with 업(▲) 그리고 아래로 (▼).
- 누르다 경보 again to activate the alarm. The alarm icon will appear on the display.
- When the alarm rings, press any button on the remote (except Power) to activate the 5-minute snooze function. The alarm will ring for 1 minute and can be snoozed up to 3 times.
- 알람을 끄려면 경보 알람 아이콘이 사라질 때까지 버튼을 누르세요.
Temperature Display & Unit Change
- 짧게 누르세요 LEFT (◀) arrow button on the remote control to cycle the display between Date, Time, and Temperature.
- While the temperature is displayed, press the 온도 button to toggle between Celsius (℃) and Fahrenheit (℉).
12/24 Hour Format Toggle
- 짧게 누르세요 업(▲) arrow button on the remote control to switch between 12-hour (with AM/PM indicator) and 24-hour formats.
유지
- 청소: Use a soft, dry cloth to clean the clock's surface. Avoid abrasive cleaners or solvents that may damage the finish.
- 원격 제어 배터리 교체 : If the remote control's functionality diminishes, replace the CR2025 button battery. Open the battery compartment on the back of the remote, remove the old battery, and insert a new one with the correct polarity.
- 저장: 장기간 시계를 보관할 경우 전원을 차단하십시오.
Image: An illustration showing the remote control and the CR2025 button battery used for its operation.
Image: A warning label indicating the ingestion hazard of button or coin batteries, advising to keep them out of reach of children and seek immediate medical attention if swallowed.
문제 해결
If you encounter issues with your KOSUMOSU 3D LED Digital Wall Clock, refer to the following common problems and solutions:
- Q: Does it run with a built-in battery?
- A: No, this LED clock requires a 5V/1A plug-in USB-A adapter (NOT included) to run. It is NOT a wireless clock.
- Q: Why does it freeze, flicker, or hum during use or when changing brightness?
- A: An unstable or incompatible power adapter cannot provide enough current and support normal working. Please try to replace it with a regular, compliant 5V/1A adapter made by professional, legitimate manufacturers.
- Q: The remote control does not work, how to fix?
- A:
- Please remove the transparent battery insulation sheet from the bottom of the remote control.
- When operating the remote control, please aim at the infrared sensor on the bottom of the clock and avoid other obstructions that may affect infrared reception. Note: The effective distance is within about 3.5 meters.
- Q: How do I stop the time separator from blinking?
- A: Just press the RIGHT (▶) arrow button on the remote control to have the time separator stop or flash.
- Q: Why did the alarm not ring at the set time?
- A: Please check the alarm time setting and time format setting (12h / 24h format). For 12h format: am12 o'clock ~ pm11 o'clock / For 24h format: 0 o'clock ~ 23 o'clock.
명세서
| 상표 | 코스모스 |
| 모델 번호 | 9.7IN Wall Clock-White Light |
| 디스플레이 유형 | 디지털 LED |
| 제품 치수 | 폭 9.7인치 x 높이 3.9인치 |
| 품목 무게 | 0.31파운드(약 142g) |
| 전원 | Corded Electric (5V/1A AC adapter required, not included) |
| 재료 | 플라스틱(아크릴로니트릴 부타디엔 스티렌) |
| 특별 기능 | Wall Clock, Alarm, Thermometer, Adjustable Brightness, Night light, Automatic Dimming, Snooze, Temperature Display |
| 리모컨 배터리 | 1 x CR2025 (포함) |
| 시간 기억 | Built-in super farad capacitor (approx. 2 hours) |
보증 및 지원
KOSUMOSU provides a 2년 보증 본 제품에 대한 보증입니다. 이 보증은 제조상의 결함 및 정상적인 사용으로 인해 발생하는 문제에 적용됩니다.
If you experience any quality or usage problems with your KOSUMOSU 3D LED Digital Wall Clock, or if you require further assistance beyond the troubleshooting guide, please contact KOSUMOSU customer service directly. You can send a message via Amazon mail (chat box). Upon receiving your message, KOSUMOSU will promptly assist in solving the problem and providing solutions.
For additional resources, you may refer to the official KOSUMOSU store on Amazon: KOSUMOSU Technology Store.
