Onforu BDB55G-3

Onforu 65W LED Motion Sensor Outdoor Flood Light

Model: BDB55G-3 - Instruction Manual

1. 서론

Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Two Onforu 65W LED Motion Sensor Outdoor Flood Lights

Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.

2. 중요한 안전 정보

경고: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.

  • 조광 스위치에 연결하지 마십시오.
  • Ensure the power supply is 120V AC, 60Hz.
  • 고정장치를 분해하거나 개조하려고 하지 마십시오.
  • 가연성 물질을 조명기구 근처에 두지 마세요.
  • Suitable for wet locations. Ensure all connections are properly sealed.

3. 패키지 내용

설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.

  • Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
  • 장착 브래킷
  • 고무 개스킷
  • 와이어 너트
  • 장착 나사
  • 사용 설명서

4. 제품 특징

  • 높은 밝기와 에너지 효율: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
  • 조절 가능한 디자인: Three adjustable heads provide a 270-degree detection zone for wide coverage.
  • Enhanced Motion Sensor: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
  • 내구성 및 방수성: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
  • 색온도: 6500K Daylight White for clear, bright illumination.
Onforu 65W LED Motion Sensor Outdoor Flood Light features including 6500LM, 6500K, 72ft detection, 180 degree detection angle, 10s-7min sensing delay, simple installation, energy saving, and IP65 waterproof.

Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.

Diagram showing aluminum heat dissipation fins on the back of the LED flood light heads.

Image 4.2: Aluminum construction for efficient heat dissipation.

5. 설치 가이드

시작하기 전에: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).

5.1 장착 옵션

The fixture can be mounted on a wall or soffit.

Diagram showing two mounting options: Soffit Mounted and Wall Mounted for the flood light.

Image 5.1: Soffit Mounted vs. Wall Mounted installation examp레.

5.2 배선 지침

  1. 주 회로 차단기의 전원을 끕니다.
  2. 제공된 나사를 사용하여 장착 브래킷을 정션 박스에 부착합니다.
  3. 전선을 연결하세요:
    • Black (L): Connect to the live wire from the power supply.
    • White (N): Connect to the neutral wire from the power supply.
    • Green (GND): Connect to the ground wire from the power supply.
    전선 연결부를 고정하려면 전선 너트를 사용하십시오.
  4. Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
  5. 조명기구를 장착 브래킷에 고정합니다.
  6. Adjust the light heads to the desired angles.
  7. 회로 차단기에서 전원을 복구하세요.
Detailed wiring diagram showing connections for Live, Neutral, and Ground wires, along with product dimensions.

그림 5.2: 배선도 및 제품 크기.

Diagram illustrating the easy 3-step installation process for the Onforu flood light.

그림 5.3: 설치 단계에 대한 시각적 안내.

6. 사용 설명서

The motion sensor has three adjustable knobs for customization:

  • SENS(민감도): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
  • LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
  • TIME (Time Delay): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Diagram showing the LUX, DISTANCE (SENS), and TIMER adjustment knobs on the motion sensor.

Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.

7. 유지관리

  • 부드러운 천으로 조명기구를 정기적으로 청소하세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
  • Periodically check electrical connections for tightness and signs of wear.
  • Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.

8. 문제 해결

문제가능한 원인해결책
조명이 켜지지 않습니다.No power; incorrect wiring; LUX setting too low.Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon.
표시등이 계속 켜져 있습니다.Continuous motion detected; TIME setting too long; wiring issue.Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed).
모션 센서가 감지되지 않습니다.SENS setting too low; obstructions; incorrect mounting height.Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range.
빛이 깜박입니다.배선 연결이 헐거움; 전원 공급이 불안정함.Check and tighten all wiring connections; consult an electrician for power supply issues.

9. 사양

특징사양
상표온 포루
모델 번호BDB55G-3
왓tage65 와트
명도6500루멘
색온도6500 켈빈(주광 백색)
모션 센서 각도180°
모션 감지 거리최대 72피트
시간 지연 조정10초부터 7분까지
방수 레벨IP65 방수
재료Metal (Die-cast Aluminum)
권tage120 볼트
제품 치수10.7인치 길이 x 5.8인치 너비 x 4.7인치 높이
광원의 수3 (Adjustable Heads)
설치 유형벽걸이형

10. 보증 및 지원

This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.

For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu web대지.

관련 문서 - BDB55G-3

사전view 온포루 PIR LED 벽등 (모션 센서 포함) - 제품 설명서
온포루 PIR LED 벽등(모션 센서 포함)의 상세 제품 설명서로, 모델 사양, 구성품 목록, 설치 가이드, 작동 방법 및 문제 해결 팁을 제공합니다.
사전view ONFORU PIR LED Wall Lights with Motion Sensor Quick Start Guide - Models BDB55G-3, BDI45G-2, BDC80G-3, BDL40G-3, BDD100G-3
Quick start guide for ONFORU PIR LED Wall Lights with Motion Sensor. Includes installation instructions, specifications, dimensions, operation, and troubleshooting for models BDB55G-3, BDI45G-2, BDC80G-3, BDL40G-3, BDD100G-3.
사전view Onforu PIR LED Wall Lights with Motion Sensor - BDB65G-3, BDB100G-3 - Installation & Operation Manual
Comprehensive product manual for Onforu PIR LED Wall Lights with Motion Sensor (Models BDB65G-3 and BDB100G-3). Includes components, specifications, detailed operation instructions for test mode, motion sensor mode, and dusk-to-dawn mode, installation guides, troubleshooting tips, and FCC compliance information.
사전view ONFORU PIR LED Wall Lights with Motion Sensor Quick Start Guide
Quick start guide for ONFORU PIR LED Wall Lights with Motion Sensor (models BDB55G-3, BDI45G-2, BDC80G-3, BDD100G-3). Covers components, parts, specifications, operation, preparation, installation, and troubleshooting.
사전view ONFORU PIR LED 벽등 (모션 센서 포함) - 설치 및 작동 설명서
ONFORU PIR LED 벽등(모션 센서 내장, 모델 BDB55G-3, BDB100G-3)의 설치, 작동, 사양 및 문제 해결에 대한 종합적인 제품 설명서입니다. 안전 경고 및 규정 준수 정보도 포함되어 있습니다.
사전view ONFORU BDB55G-3 PIR LED Wall Light with Motion Sensor - Quick Start Guide
Quick start guide and technical specifications for the ONFORU BDB55G-3 PIR LED Wall Light with Motion Sensor. Includes installation, operation, safety information, and troubleshooting.