HiTauing 200W Aquarium Heater Instruction Manual

1. 제품 오버view

The HiTauing 200W Aquarium Heater is designed to maintain a warm and stable environment for your aquatic pets. This submersible heater features a digital display for precise temperature control and multiple safety mechanisms.

This 200W aquarium heater is intended exclusively for indoor aquarium use and heating. Ensure no part of the heater is covered by filter material or debris to prevent malfunctions.

이미지 1.1: HiTauing 200W Aquarium Heater with external temperature controller.

2. 안전 경고

Please read all safety warnings carefully before use to prevent injury or product damage.

• Before powering on, inspect the product for any damage. If any damage is found, discontinue use immediately and contact customer support.
• The submersible aquarium heater must be fully submerged in water. The temperature controller unit is not submersible and must not be placed in water.
• Do not disassemble the aquarium heater or make structural modifications. This can lead to product damage and potential injury.
• When cleaning or performing maintenance on the aquarium heater, always disconnect power for 5 to 10 minutes before removing it from the water.
• Ensure the heater is securely installed using the provided suction cups to prevent it from detaching and potentially causing issues.
• This heater is designed for aquariums between 20 to 40 gallons. Using it in tanks outside this range may affect performance.

이미지 2.1: Diagram illustrating the 6-point safety system, including quartz glass, anti-scald shell, overheat protection, and low water level warning.

3. 설정 지침

1. 포장 풀고 검사하기: Carefully remove the heater and controller from the packaging. Inspect all components for any signs of damage.
2. 히터 위치: Place the submersible heater fully inside your aquarium. Ensure it is positioned vertically or horizontally, completely covered by water. Avoid placing it directly in the substrate or near strong water flow that could dislodge it.
3. Secure with Suction Cups: Use the two provided suction cups to firmly attach the heater to the inner wall of the aquarium. This prevents movement and ensures stable operation.
4. 컨트롤러를 배치하십시오: Mount the external temperature controller in a dry location, away from water splashes. The controller unit is not waterproof.
5. 전원 연결: Plug the heater's power cord into a suitable electrical outlet (220V AC).

이미지 3.1: Examples of correct (fully submerged) and incorrect (partially submerged or out of water) heater installations.

4. 사용 설명서

The HiTauing aquarium heater features a digital display temperature control system for real-time water temperature monitoring and adjustment.

• 전원 켜기: Once plugged in, the digital display on the controller will illuminate.
• 온도 표시 : The display shows the current water temperature and the set temperature.
• 온도 조정: The adjustable temperature range is 17 °C to 34 °C (64 °F to 93 °F). Press the temperature setting button to adjust the desired temperature. Each press adjusts the temperature by ± 1 °F/°C.
• 변환 단위(°F/°C): Press and hold the temperature setting button for 3 seconds to switch between Fahrenheit (°F) and Celsius (°C).
• 난방 표시기: A red light on the controller indicates that the heater is actively heating the water.
• Constant Temperature Indicator: A green light on the controller indicates that the heater has reached the set temperature and is maintaining it.
• 빠른 가열: The heater utilizes a high-quality nichrome alloy electric heating wire for efficient and consistent temperature maintenance, reaching the set temperature within minutes. Heating automatically stops once the set temperature is achieved and resumes if the temperature drops.

이미지 4.1: Diagram detailing the digital display, temperature control button, and heating/constant temperature indicators.

5. 유지관리

• 정기 청소: Over time, algae and mineral deposits may accumulate on the heater. To clean, disconnect the heater from power for 5-10 minutes, then carefully remove it from the aquarium. Gently wipe the heater surface with a soft cloth or sponge. Do not use abrasive cleaners or harsh chemicals.
• 손상 여부 확인: Periodically inspect the heater and power cord for any signs of wear, cracks, or damage. If any damage is observed, discontinue use and replace the unit.
• Suction Cup Inspection: Ensure the suction cups remain firmly attached to the aquarium wall. Replace them if they lose their grip.

6. 문제 해결

• E1 오류 코드: If the temperature control system displays an "E1" error code, it indicates that the submersible heater is not fully submerged in water. Immediately unplug the heater, ensure it is completely underwater, and then plug it back in.
• 히터가 작동하지 않음:
  • 전원 코드가 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • Verify that the set temperature is higher than the current water temperature.
  • 히터가 완전히 물에 잠겨 있는지 확인하세요.
  • Check for any visible damage to the heater or controller.
• 온도 변동:
  • Ensure the heater is appropriately sized for your aquarium volume (200W for 20-40 gallons).
  • Check for strong drafts or external temperature changes affecting the aquarium.
  • Ensure no filter material or debris is covering the heater, which can impede heat distribution.

7. 사양

이미지 7.1: Chart showing different heater powers, lengths, and recommended tank sizes.

8. 보증 및 지원

As a brand seller, our primary goal is to provide high-quality products and support your purchase. We offer a 2년 보증 서비스 구매일로부터.

Should you encounter any issues with your HiTauing 200W aquarium heater, please do not hesitate to contact us for assistance. Our customer support team is dedicated to helping you resolve any problems.