소개
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your MAF 14-Inch Queen Metal Platform Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference.
중요한 안전 정보
- Exercise caution around metal slats during assembly and use.
- Ensure all components are properly assembled and tightened before use to prevent instability.
- 최대 중량은 3000파운드를 초과하지 마십시오.
- 조립하는 동안 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
조립을 시작하기 전에 아래 나열된 모든 부품이 포함되어 있고 손상되지 않았는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.
- Bed Frame Sections (Head, Foot, Side Rails)
- 지지 다리
- 강철 슬랫
- Mattress Stopper(s)
- Anti-slip Rubber Pads for Legs
- 조립용 하드웨어(볼트, 와셔, 너트)
- Assembly Tool (Hex Key/Wrench)
- 사용 설명서
This image displays a table detailing various bed frame sizes, corresponding mattress dimensions, the maximum weight capacity of 3000 LBS, and the typical contents included in the box for each size, including the bed frame, instructions, screws, and wrench.
설정 및 조립
Assembly of the MAF Queen Metal Platform Bed Frame is designed to be straightforward and can typically be completed by one person in approximately 20 minutes. All necessary tools are included in the package.
- 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼내어 흠집이 생기지 않도록 깨끗하고 부드러운 표면에 펼쳐 놓으십시오. 포장 내용물 목록과 모든 부품이 일치하는지 확인하십시오.
- 프레임 섹션 조립: Connect the main frame sections (side rails, head, and foot sections) using the provided hardware. Do not fully tighten bolts until all sections are loosely connected.
- 지지 다리 부착: Securely attach all support legs to the frame. Ensure the anti-slip rubber pads are placed on the bottom of each leg to protect your floor and prevent sliding.
- 철제 슬랫을 설치하세요: Place the steel slats into the designated U-shaped grooves on the frame. Ensure each slat is properly seated to provide optimal mattress support and prevent movement.
- Install Mattress Stopper(s): Attach the mattress stopper(s) to the designated points on the frame. Ensure they are mounted outwards to effectively prevent the mattress from slipping.
- 최종 조임: Once all components are in place and aligned, systematically tighten all bolts using the provided wrench. Ensure all connections are secure but do not overtighten.
This image illustrates the correct way to mount the mattress stopper, showing it positioned outwards from the frame, and an incorrect example where it is mounted inwards.
작동 지침
매트리스 배치
This platform bed frame is designed to be used without a box spring. Place your mattress directly onto the steel slats. The integrated mattress stoppers and anti-skid baffles will help keep your mattress securely in place.
This image shows the MAF bed frame with a mattress placed directly on its slats, illustrating the "No Box Spring Needed" feature.
중량 용량
The MAF 14-Inch Queen Metal Platform Bed Frame is constructed from heavy-duty steel and is capable of supporting up to 3000 pounds. Distribute weight evenly across the frame.
This image highlights the robust construction of the bed frame, emphasizing its 3000 LBS weight capacity.
침대 아래 수납공간
With 14 inches of height, the frame provides approximately 12.4 inches of clearance for under-bed storage, allowing you to maximize space in your bedroom.
This image demonstrates the generous 12.4-inch under-bed clearance, suitable for storing various items.
유지
- 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 강한 화학 물질은 피하세요.
- 하드웨어 검사: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent noise.
- 바닥 보호: Ensure the rubber foot pads are intact and in place to protect your flooring and prevent the frame from sliding.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 삐걱거리는 소리 또는 소음 | 금속 부품 간의 연결 불량 또는 마찰. | Ensure all bolts are securely tightened. The frame is designed with noiseless features, including rubberized tips on slats and rubber foot pads. Check these components for proper placement. |
| 매트리스 미끄러짐 | Mattress stoppers not installed correctly or missing. | Verify that the plastic anti-slip baffles (mattress stoppers) are correctly installed and facing outwards. Ensure the mattress is centered on the frame. |
| 프레임 불안정성 | Uneven assembly or loose hardware. | Recheck all connections and ensure they are fully tightened. Make sure the frame is on a level surface. |
명세서
- 모델: MT10-JD-AMZ01-14Q
- 크기: 여왕
- 제품 크기: 79.5인치 길이 x 59.5인치 너비 x 14인치 높이
- 호환 매트리스 크기: 80인치 x 60인치
- 재료: 헤비 듀티 스틸
- 색상: 검은색
- 마감 유형 : 매트
- 중량 용량: 3000파운드
- Ground to Item Distance (Under-bed Clearance): 12.4 인치
- Slat Distance: 5.5 Inches (for Queen/King sizes)
- 특별 기능: Rounded Corners, Steel Slat Support, No Box Spring Needed, Easy Assembly, Storage Space, Squeak Resistant, Anti-Slip Design
- 필요한 조립: 예
This image provides a visual representation of the queen bed frame's dimensions, including overall length, width, height, and under-bed storage clearance.
보증 및 지원
보증 정보
This MAF Metal Platform Bed Frame comes with a 5-year after-sale service. This warranty covers manufacturing defects and structural integrity under normal use. Please retain your proof of purchase for warranty claims.
고객 지원
For any questions, assistance with assembly, missing parts, or warranty claims, please contact MAF customer support. We are committed to providing a satisfactory solution as quickly as possible.
연락처 정보:
- 이메일: support@maf-sleep.com (전amp(실제 이메일은 제공되지 않음)
- 핸드폰: 1-800-XXX-XXXX (구amp(실제 전화번호는 제공되지 않음)
- Web대지: www.maf-sleep.com (전amp르, 실제 website not provided)
Please note: The contact email, phone, and website provided above are examples. Refer to your product packaging or purchase documentation for official MAF customer support details.
