NutriBullet NB50301S

NutriBullet GO Cordless Blender Instruction Manual

Model: NB50301S

소개

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

중요한 보호 조치

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, injury, or property damage.

무엇이 포함됩니까?

Your NutriBullet GO Cordless Blender package includes:

NutriBullet GO Cordless Blender components including motor base, two cups, two lids, blade cover, and USB charging cord.

Image: All components included with the NutriBullet GO Cordless Blender.

설정

배터리 충전

  1. Connect the USB charging cord to the charging port on the motor base.
  2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
  3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.
NutriBullet GO Cordless Blender motor base with a blue indicator light, showing it is powered on or charging.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

집회

  1. 모터 베이스가 완전히 충전되었는지 확인하십시오.
  2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
  3. Securely twist the blade assembly onto the cup until it is tightly sealed.
  4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

작동 지침

블렌딩

  1. After assembly, press the power button on the motor base to begin blending.
  2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
  3. Avoid blending continuously for more than 30 seconds to prevent overheating.
  4. If the blender stops, gently shake the unit to redistribute ingredients and restart.
NutriBullet GO Cordless Blender filled with fruits and berries, ready for blending.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

블렌딩 후

  1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
  2. 컵에서 칼날 조립체를 조심스럽게 돌려서 분리하세요.
  3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

유지관리 및 청소

Cleaning the Blade and Cups

  1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
  2. Use a brush to clean around the blades carefully.
  3. The cups and lids are top-rack dishwasher safe.

모터 베이스 청소

  1. 광고로 모터 베이스 닦기amp 옷감.
  2. 모터 베이스를 물이나 다른 액체에 담그지 마십시오.
  3. 충전하기 전에 충전 포트가 건조한지 확인하십시오.

문제 해결

블렌더가 켜지지 않습니다:

재료가 원활하게 섞이지 않습니다.

Indicator light is red:

명세서

특징사양
모델 번호NB50301S
모터 파워70와트
배터리 용량2000mAh
컵 용량13온스(370밀리리터)
블레이드 소재스테인리스 스틸
재료 유형 무료BPA 프리
전원코드식 전기 (충전용)
품목 무게1.87파운드

보증 정보

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet web자세한 이용 약관은 해당 사이트를 참조하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet web사이트를 방문하거나 고객 서비스에 문의하세요.

공식적인 Web대지: www.nutribullet.com