소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GeoVision GV-TBL8804 8MP H.265 Super Low Lux WDR Pro Full Color Warm LED IR Bullet IP Camera. The GV-TBL8804 is an outdoor network camera designed for day and night surveillance, featuring an automatic IR-cut filter, one IR LED, and two warm LEDs. It supports H.265 video codec for efficient compression and adheres to IP67 standards for outdoor use. The camera can be powered via Power over Ethernet (PoE) and incorporates AI deep learning algorithms for distinguishing human and vehicle movements, enhancing perimeter protection and real-time alerts when integrated with GeoVision Video Management Software (VMS).
패키지 내용
설치를 진행하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.
- GeoVision GV-TBL8804 8MP Bullet IP Camera
- 설치 가이드
- 장착 나사 및 앵커
- Waterproof Connector (for Ethernet cable)
- Software CD (or download link for GV-VMS)
제품 끝view
The GeoVision GV-TBL8804 camera features a robust design suitable for outdoor environments. Below is an illustration of the camera's main components.
그림 1: 앞면과 측면 view of the GeoVision GV-TBL8804 8MP Bullet IP Camera. The image displays the main camera lens, two warm LEDs, and a single IR LED on the front panel. The side shows the GeoVision logo and the adjustable mounting bracket.
주요 특징:
- 1/2.7" progressive scan super low lux CMOS sensor for superior low-light performance.
- Day and Night function with a removable IR-cut filter for optimal image quality in varying light conditions.
- Built-in micro SD card slot (SD / SDHC / SDXC / UHS-I, Class 10) for local storage of recordings.
- AI deep learning capabilities for AI Perimeter Protection and classification of human and vehicle objects.
- IP67-rated weather-resistant enclosure for outdoor installation.
- Two-way audio support for communication.
- Alarm sound and warm LED light triggered by AI detection events for enhanced security.
설정
1. 카메라 장착
- 위치 선택: Choose a suitable outdoor location that provides the desired surveillance coverage and is within range of your network infrastructure. Ensure the mounting surface is sturdy enough to support the camera.
- 드릴 구멍: Use the provided mounting template (if available) to mark and drill pilot holes for the mounting screws.
- 브래킷을 고정합니다: Attach the camera's mounting bracket securely to the surface using the supplied screws and anchors.
- 각도 조정: Loosen the adjustment screws on the bracket to position the camera at the desired angle. Tighten the screws once the camera is in place.
2. 전원 및 네트워크 연결
- 이더넷 케이블: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the camera's Ethernet port. Use the waterproof connector to ensure a secure and weather-resistant connection.
- 전원(선택 사항): If not using PoE, connect a compatible 12V DC power adapter (not included) to the camera's power input.
- 표시등: Observe the camera's indicator lights. A solid green light typically indicates a successful network connection and power.
3. 초기 구성
- 소프트웨어 설치: Install the GeoVision GV-VMS software on a Windows-based computer connected to the same network as the camera.
- 장치 검색: Use the GV-VMS software or GeoVision's IP Device Utility to discover the camera on your network.
- 기본 자격 증명: Log in to the camera using the default username and password (refer to the separate Quick Start Guide or GeoVision documentation for default credentials).
- 비밀번호 변경: 보안을 위해 기본 비밀번호를 강력하고 고유한 비밀번호로 즉시 변경하십시오.
- 네트워크 설정: Configure network settings such as IP address (static or DHCP), subnet mask, and gateway as required by your network environment.
- 시간 설정: 날짜와 시간을 올바르게 설정하십시오. 가능하면 NTP 서버와 동기화하는 것이 좋습니다.
작동 지침
1. 라이브 접속 View
- GV-VMS: Open the GeoVision GV-VMS software, add the camera to your device list, and select it to view 라이브 피드.
- Web 브라우저: Enter the camera's IP address into a web browser (e.g., Chrome, Firefox) to access its web interface. Log in with your credentials to view 실시간 영상을 보고 설정을 구성하세요.
- 모바일 앱: Download and install the GV-Eye mobile application. Add your camera or GV-VMS server to view 라이브 푸tage 원격으로.
2. Configuring Recording
- 로컬 저장소(SD 카드): Insert a Class 10 micro SD card into the camera's slot. Format the SD card via the camera's web interface or GV-VMS. Configure recording schedules and event-triggered recording settings.
- NVR/VMS Recording: If using a Network Video Recorder (NVR) or GV-VMS, configure recording settings directly within the NVR/VMS software.
3. Utilizing AI Features
- AI Perimeter Protection: 카메라 내부 web interface or GV-VMS, define detection zones and set rules for AI perimeter protection. This allows the camera to distinguish between human and vehicle intrusions.
- 이벤트 트리거: Configure actions to be taken upon AI detection, such as sending alerts, triggering alarm sounds, or activating the warm LED lights.
유지
1. 청소
- 카메라 렌즈와 하우징을 부드러운 천으로 정기적으로 닦아주세요.amp 먼지, 때 또는 물 얼룩을 제거하는 천.
- Do not use harsh chemicals or abrasive materials, as these can damage the lens or housing.
2. 펌웨어 업데이트
- 지오비전 공식 웹사이트를 주기적으로 확인하세요. web펌웨어 업데이트 사이트.
- Firmware updates can provide new features, performance improvements, and security enhancements.
- Follow the instructions provided with the firmware update package carefully to avoid damaging the device.
3. 데이터 백업
- If using local SD card storage, regularly back up important recordings to an external storage device or network location.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No image/video feed. | No power, network issue, incorrect IP address. | Check power connection (PoE or adapter). Verify Ethernet cable connection. Ensure camera's IP address is correct and accessible on the network. |
| 이미지 품질이 좋지 않습니다. | 렌즈 오염, 초점 불량, 저조도 환경. | Clean the camera lens. Check focus settings (if adjustable). Ensure sufficient lighting or verify Day/Night mode is functioning correctly. |
| 카메라에 접근할 수 없습니다 web 브라우저. | Incorrect IP address, network firewall, browser compatibility. | Confirm the camera's IP address. Check local firewall settings. Try a different web 브라우저. |
| AI detection not working. | Incorrect configuration, environmental factors. | Review AI detection zone and rule settings in the camera's interface. Ensure the camera's view 시야가 트여 있고 막힌 곳이 없습니다. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | GV-TBL8804 |
| 효과적인 스틸 해상도 | 8 MP |
| 최고 Web캠 이미지 해상도 | 8 MP |
| 비디오 캡처 해상도 | 1080p (Note: 8MP resolution is for still images/higher quality streams, 1080p might refer to a common streaming resolution) |
| 포토 센서 기술 | CMOS (1/2.7" progressive scan super low lux) |
| 실내/실외 사용 | 집 밖의 |
| 국제 보호 등급 | IP67 |
| 전원 | 유선 전기 (PoE 호환) |
| 연결 기술 | Wireless (refers to IP network connectivity, not Wi-Fi) |
| 연결 프로토콜 | 한국어: |
| 장착 유형 | 벽걸이형 |
| 폼 팩터 | 총알 |
| 저조도 기술 | Day/Night, Super Low Lux |
| 광원 유형 | LED (IR and Warm LED) |
| 초점 유형 | 자동 초점 |
| 품목 치수(L x W x H) | 7.4 x 2.8 x 2.8 인치 |
| 품목 무게 | 1파운드 |
| 제조업체 | GeoVision INC |
보증 및 지원
GeoVision products are typically covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GeoVision web자세한 보증 약관은 해당 사이트에서 확인하세요.
For technical support, product inquiries, or service requests, please contact GeoVision customer support through their official website or the contact information provided in your product documentation. Ensure you have your product model number (GV-TBL8804) and serial number ready when contacting support.
지오비전 공식 Web대지: www.geovision.com.tw
