1. 서론
This manual provides comprehensive instructions for the safe and efficient operation of your HDWR HD44 Wireless Laser Barcode Scanner. Please read this manual thoroughly before using the device and retain it for future reference.
The HDWR HD44 wireless barcode scanner is designed for durability and comfort. Its ergonomic shape ensures convenient daily use. This scanner operates wirelessly using radio wave technology, providing freedom of movement within a 5-meter range via its USB receiver. An integrated memory allows storage of thousands of scanned codes for later transfer to a computer.
The scanner supports various 1D barcodes, including:
- EAN-13, EAN-8, UPC-A, UPC-E
- 코드 39, 코드 93, 코드 128
- Interleaved 2 of 5, ITF-14, Industrial 2 of 5, Matrix 2 of 5
- Codabar, Code 11, MSI/Plessey, UK/Plessey
- GS1 DataBar, GS1 DataBar Limited
Image 1.1: HDWR HD44 Wireless Laser Barcode Scanner, USB receiver, and charging cable.
2. 패키지 내용
다음 항목에 대한 상자를 체크해 주세요.
- HDWR HD44 Wireless Barcode Scanner
- USB 수신기
- USB 충전 케이블
- 사용자 설명서
Image 2.1: The HDWR HD44 Wireless Barcode Scanner.
3. 설정
3.1 스캐너 충전
Before first use, fully charge the scanner. Connect the USB charging cable to the scanner's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status.
3.2 USB 수신기 연결
- 패키지에 포함된 USB 수신기를 찾으십시오.
- USB 수신기를 컴퓨터나 호스트 장치의 사용 가능한 USB 포트에 꽂습니다.
- The system should automatically detect and install the necessary drivers. No manual driver installation is typically required.
Image 3.1: The USB receiver for wireless connection.
3.3 전원 켜기/끄기
To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the indicator light turns on. To power off, press and hold the trigger button again until the scanner powers down.
4. 사용 설명서
4.1 기본 스캐닝
- Ensure the scanner is powered on and connected to your device via the USB receiver.
- 스캐너의 레이저 빔을 스캔하려는 바코드에 비추세요.
- Press the trigger button. A successful scan will be indicated by a beep and/or a change in the indicator light.
- The scanned data will be transmitted to your connected computer as keyboard input.
Image 4.1: The HDWR HD44 scanner operating wirelessly.
4.2 Using Integrated Memory
The HDWR HD44 scanner features an integrated memory to store scanned barcodes when out of range or when direct transmission is not desired. To utilize this feature:
- Scan barcodes as usual. The scanner will automatically store them if not connected or if configured for storage mode.
- To transfer stored data, ensure the scanner is connected to your computer via the USB receiver.
- Scan the 'Upload Data' configuration barcode (refer to the full user manual for specific configuration barcodes). The stored data will then be transmitted to your computer.
5. 유지관리
5.1 청소
To maintain optimal performance, keep the scanner clean. Use a soft, dry cloth to wipe the exterior. For the scanning window, use a soft, lint-free cloth lightly damp순하고 마모성이 없는 세척제로 마무리하십시오. 독한 화학 물질이나 연마제를 사용하지 마십시오.
5.2 배터리 관리
The scanner uses a Lithium-ion battery. To prolong battery life:
- 배터리를 자주 완전히 방전시키지 마세요.
- 장시간 사용하지 않을 때는 스캐너를 서늘하고 건조한 곳에 보관하세요.
- 배터리를 계속 사용하지 않더라도 정기적으로 충전하십시오.
6. 문제 해결
6.1 스캐너가 응답하지 않음
- Ensure the scanner is charged. Connect it to the charging cable and a power source.
- Verify the scanner is powered on. Press and hold the trigger button.
- 컴퓨터에 연결된 USB 수신기의 연결 상태를 확인하십시오. 다른 USB 포트를 사용해 보십시오.
6.2 바코드가 스캔되지 않음
- 바코드가 깨끗하고 손상되지 않았으며 선명하게 인쇄되었는지 확인하세요.
- 스캐너와 바코드 사이의 거리와 각도를 조정하세요.
- Check if the barcode type is supported by the scanner (refer to Section 1: Introduction).
- Clean the scanner's optical window as described in Section 5.1.
6.3 Data Not Transmitting to Computer
- Confirm the USB receiver is properly connected and recognized by the computer.
- Ensure the scanner is within the 5-meter wireless range of the receiver.
- If data was stored in memory, ensure you have initiated the data upload process (refer to Section 4.2).
7. 사양
| 상표 | HDWR |
| 모델 번호 | HD44 |
| 연결 기술 | USB (수신기 경유) |
| 호환 장치 | 데스크탑 컴퓨터 |
| 전원 | 배터리 구동 |
| 배터리 유형 | 1. 리튬 이온 배터리 (필수) |
| 운영 볼륨tage | 5 볼트 |
| 최대 보관 온도 | 섭씨 60도 |
8. 보증 및 지원
8.1 제조업체 보증
The HDWR HD44 Wireless Laser Barcode Scanner comes with a 2년 제조사 보증. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.
8.2 고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact HDWR customer support through their official website or the retailer where the product was purchased. Please have your model number (HD44) and purchase details ready when contacting support.
