유니view NVR301-08S3

유니view NVR301-08S3 4K 네트워크 비디오 레코더 사용 설명서

Model: NVR301-08S3

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the Uniview NVR301-08S3 4K Network Video Recorder. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This NVR supports Ultra 265/H.265/H.264 video formats, offers 4/8/16-channel input, and supports mainstream cameras conforming to ONVIF (Profile S, 프로file 지, 프로file T) and RTSP protocols. It features 1-ch HDMI and 1-ch VGA output, with HDMI supporting up to 4K (3840x2160) resolution, and accommodates 1 SATA HDD up to 8TB.

2. 안전 정보

  • 전원 공급 장치: Use only the power adapter provided or specified by Uniview. Ensure the power source matches the NVR's requirements.
  • 통풍: Ensure adequate ventilation around the NVR to prevent overheating. Do not block ventilation openings.
  • 환경: Do not expose the NVR to water, moisture, extreme temperatures, or direct sunlight. Avoid placing it near heat sources.
  • 손질: Handle the NVR with care. Avoid dropping or subjecting it to strong impacts.
  • 서비스: NVR을 직접 열거나 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
  • 처분: Dispose of the product and its accessories according to local environmental regulations.

3. 패키지 내용

패키지에 모든 구성품이 들어 있는지 확인하십시오. 구성품이 누락되었거나 손상된 경우 즉시 판매점에 문의하십시오.

  • 유니view NVR301-08S3 Unit
  • 전원 어댑터
  • USB 마우스
  • SATA 케이블 (HDD 연결용)
  • 나사 (HDD 장착용)
  • 빠른 시작 가이드

4. 제품 오버view

대학교view NVR301-08S3 is a compact and powerful 4K Network Video Recorder designed for reliable surveillance recording. It supports various video compression technologies and offers flexible input channels for IP cameras.

앞쪽 view of the Uniview NVR301-08S3 4K Network Video Recorder, showing the UNV logo and indicator lights for RUN, NET, and HD.

그림 4.1: 앞쪽 view of the Uniview NVR301-08S3, displaying the UNV logo and status indicator lights (RUN, NET, HD).

각진 view of the Uniview NVR301-08S3 4K Network Video Recorder, showing the front panel with indicator lights and a side ventilation grill.

그림 4.2: 각진 view of the Uniview NVR301-08S3, highlighting the front panel and side ventilation for heat dissipation.

5. 설정

5.1 하드웨어 설치

  1. 하드 디스크 드라이브(HDD) 설치:
    • NVR의 상단 덮개를 나사를 풀어 제거합니다.
    • SATA 데이터 케이블과 전원 케이블을 하드 드라이브에 연결하세요.
    • 제공된 나사를 사용하여 HDD를 NVR 섀시에 고정하십시오.
    • 윗 덮개를 다시 덮고 나사로 고정합니다.
  2. 카메라 연결: Connect your IP cameras to the same network as the NVR. Ensure cameras are powered on.
  3. 디스플레이 연결: NVR의 HDMI 또는 VGA 포트에 모니터를 연결하세요.
  4. 네트워크 연결: Connect the NVR to your network router/switch using an Ethernet cable.
  5. USB 마우스 연결: USB 마우스를 NVR의 USB 포트에 연결하세요.
  6. 전원 연결: 전원 어댑터를 NVR에 연결한 후 전원 콘센트에 연결하세요. NVR의 전원이 자동으로 켜집니다.

5.2 초기 구성

  1. 첫 번째 부팅: Upon first boot, the NVR will guide you through a setup wizard. Follow the on-screen prompts.
  2. 암호를 설정하세요: 관리자 계정에 강력한 비밀번호를 설정하세요.
  3. 네트워크 설정: Configure network settings (DHCP or Static IP) to ensure the NVR can communicate with cameras and the internet.
  4. 하드디스크 초기화: The NVR will prompt you to initialize the newly installed HDD. Follow the instructions to format it for recording.
  5. 카메라 추가: Use the camera management interface to search for and add IP cameras to the NVR.

6. 사용 설명서

6.1 라이브 View

로그인 후 NVR에 라이브가 표시됩니다. view of connected cameras. You can switch between different camera layouts and views using the on-screen controls.

  • 하나의 View: 카메라 피드를 두 번 클릭하여 view 전체 화면으로 보세요.
  • 멀티-View: Select the desired grid layout (e.g., 4-channel, 8-channel) from the toolbar.

6.2 녹음

The NVR supports continuous, scheduled, and event-triggered recording.

  • 예약 녹화 : 로 이동 메뉴 > 녹화 > 일정 to set up recording times for each camera.
  • 수동 녹음: 라이브에서 view, click the record icon next to a camera to start/stop manual recording.
  • 모션 감지 녹화: Configure motion detection settings for cameras under 메뉴 > 알람 > 동작 감지 and link them to recording schedules.

6.3 재생

다시view 기록된 footage:

  1. 이동하다 메뉴 > 재생.
  2. 원하는 카메라와 날짜/시간 범위를 선택하세요.view.
  3. Use the timeline and playback controls (play, pause, fast forward, rewind) to navigate through the footage.

절대 백업

To export recorded footage:

  1. NVR의 USB 포트에 USB 플래시 드라이브를 삽입하세요.
  2. 이동하다 Menu > Backup.
  3. Select the camera, date, and time segment for the footage you want to back up.
  4. Choose the USB device as the destination and start the backup process.

6.5 원격 접속

원격용 viewing via mobile app or client software, ensure the NVR has internet access and configure port forwarding on your router if necessary, or use Uniview's cloud service if available.

  • 모바일 앱: 공식 유니 앱을 다운로드하세요view mobile app, register an account, and add your NVR using its serial number or QR code.
  • 클라이언트 소프트웨어: Install the Uniview client software on your PC and add the NVR using its IP address or cloud ID.

7. 유지관리

  • 펌웨어 업데이트: Periodically check the official Uniview web최적의 성능과 보안을 보장하기 위해 펌웨어 업데이트 사이트를 이용하십시오. 업데이트 시 제공된 지침을 주의 깊게 따르십시오.
  • 하드디스크 관리: Regularly check the health status of your HDD under Menu > Storage > HDD Info. Consider replacing HDDs that show signs of failure.
  • 청소: Gently clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust.
  • 비밀번호 보안: Change your NVR's password regularly and use strong, unique passwords.

8. 문제 해결

문제가능한 원인해결책
모니터에 비디오 출력이 없습니다HDMI/VGA 케이블이 헐거워졌거나, 디스플레이 해상도가 잘못되었거나, NVR 전원이 켜져 있지 않은 경우입니다.Check cable connections; Try a different monitor or cable; Ensure NVR is powered on and indicator lights are active.
Cannot find IP camerasCameras not powered; Network connectivity issues; Incorrect IP address range.Verify camera power; Check network cables and router; Ensure NVR and cameras are on the same subnet.
NVR이 녹화되지 않음HDD not initialized or full; Recording schedule not set; Camera disconnected.Initialize or format HDD; Check recording schedules; Verify camera connection and status.
원격 접속이 작동하지 않습니다NVR not connected to internet; Port forwarding not configured; Incorrect app settings.Check NVR network status; Configure port forwarding on your router; Verify app settings and NVR cloud status.

9. 사양

특징사양
모델 번호NVR301-08S3
상표유니view
비디오 압축울트라 265/H.265/H.264
비디오 입력4/8/16채널
비디오 출력1-ch HDMI, 1-ch VGA
HDMI 해상도최대 4K(3840x2160) 해상도 지원
녹화 해상도최대 4K
SATA HDD SupportSATA HDD 1개, 최대 8TB
호환 장치Television, Monitor
연결 기술HDMI, VGA, Ethernet
품목 무게3.04파운드
패키지 크기17.32 x 11.46 x 3.27 인치

10. 보증 및 지원

For warranty information, technical support, and service inquiries, please contact your authorized Uniview dealer or visit the official Uniview web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

관련 문서 - NVR301-08S3

사전view 유니view NVR301-04-P4 | 합금 비밀번호 재설정 절차
Alloys에서 제공하는 Uni 비밀번호 재설정 방법에 대한 단계별 가이드view 네트워크 비디오 레코더(NVR301-04-P4)에는 비밀번호 복구에 필요한 정보와 연락처 정보가 포함되어 있습니다.
사전view 네트워크 비디오 레코더(NVR) 빠른 가이드 - 설치 및 설정
대학을 위한 포괄적인 빠른 가이드view 네트워크 비디오 레코더(NVR). 설치, 안전 예방 조치, 규정 준수, 포트 식별, LED 상태 표시등 및 초기 시작 절차에 대해 알아보세요. 간편한 액세스를 위한 기본 로그인 정보가 포함되어 있습니다.
사전view NVR-B3601.33.45.221212 릴리스 노트 - Zhejiang Uniview 기술
저장대학교 공식 릴리스 노트view Technologies의 NVR-B3601.33.45.221212 네트워크 비디오 레코더 소프트웨어에 대한 버전 정보, 새로운 기능, 변경 사항 및 업그레이드 절차에 대한 자세한 내용입니다.
사전view NVR-B3601.28.47.201023 릴리스 노트 - Uniview 네트워크 비디오 레코더 소프트웨어 업데이트
저장대학교 공식 릴리스 노트view Technologies의 NVR-B3601.28.47.201023 소프트웨어에 대한 버전 변경 사항, 사용 참고 사항 및 네트워크 비디오 레코더 업그레이드 절차에 대한 자세한 내용이 포함되어 있습니다.
사전view 대학을 바꾸는 방법view NVR의 시간 설정
Uni의 시간 및 날짜 설정을 조정하는 방법에 대한 단계별 가이드view 다양한 방법을 사용하는 네트워크 비디오 레코더(NVR) web 인터페이스, 모니터 직접 접근, EZTools 소프트웨어 및 EZ와 같은 모바일 앱View 그리고 UNV-Link.
사전view EZTools 3.0 사용자 설명서 - Uniview 장치 관리
EZTools 3.0(Uni)의 종합 사용자 설명서view 이 도구는 근거리 통신망(LAN)에서 IPC, NVR, 디스플레이 제어 장치, 출입 통제 장치, 도어 스테이션 및 실내 스테이션을 구성하고 관리하도록 설계되었습니다.