Perlegear PGTVS05 Universal Swivel Table Top TV Stand Instruction Manual

중요한 안전 정보

Please read this manual thoroughly before installation and keep it for future reference. If you have any questions, please contact our U.S.-based customer service team.

• 중량 용량: This TV stand is designed for TVs weighing up to 99 lbs (45 kg). Do not exceed this weight limit.
• TV 크기 호환성: Suitable for most 37-70 inch flat or curved TVs.
• VESA 호환성: Supports VESA patterns from 200x100mm (8"x4") to 800x400mm (31"x16"). Ensure your TV's VESA pattern falls within this range.
• 재료: Constructed from alloy steel and tempered glass for strong stability and durability.
• 안정: Features a 16.54" x 11.81" tempered glass base and five larger non-slip pads to maximize stability and prevent scratching surfaces.

Image: Illustration emphasizing safety, showing a TV stand with a child and pet nearby, indicating secure positioning to prevent tip-overs.

패키지 내용

조립을 시작하기 전에 모든 부품이 있고 손상되지 않았는지 확인하세요.

• 강화 유리 베이스
• 하부 지지 기둥
• 상부 지지 기둥
• 전면 지지 브래킷
• TV 브래킷 (2개)
• Plastic Cover for Base
• Non-slip Pads (5 pieces)
• Various Screws, Washers, and Allen Keys (labeled A, B, C, etc.)
• 케이블 클립

Image: All components of the Perlegear PGTVS05 TV stand laid out on a surface, including the glass base, support pillars, brackets, and hardware bags.

설치 및 조립 지침

Follow these steps for a drill-free and easy installation.

Step 1: Attach Non-Slip Pads to the Base

Carefully peel and attach the five non-slip pads to the underside of the tempered glass base. Place one pad at each corner and one in the center to ensure maximum stability and protect your furniture surface.

Step 2: Secure Lower Support Pillar to the Base

Align the lower support pillar with the pre-drilled holes on the tempered glass base. Use the provided plastic cover, washers, and bolts to securely fasten the pillar to the base. Ensure all connections are tight.

Step 3: Connect Upper Support Pillar

Slide the upper support pillar into the lower support pillar. Align the holes and secure it using the provided screws and Allen key. This connection forms the main vertical support for your TV.

Step 4: Assemble the Front Support Bracket

Assemble the horizontal front support bracket by connecting its various segments using the provided screws. Ensure all connections are firm and the bracket forms a stable frame.

Step 5: Attach Front Support to Upper Support Pillar

Mount the assembled front support bracket to the upper support pillar. Use the designated holes and screws to secure it. This is where your TV brackets will eventually attach.

6단계: TV 브래킷을 TV에 부착하세요

Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate VESA screws and washers from the provided hardware kit. Ensure the brackets are oriented correctly (arrows pointing up) and are securely fastened.

Image: Diagram showing compatible TV sizes (37"-70") and VESA patterns (200x100mm to 800x400mm) for the TV stand.

Step 7: Attach the TV to the Front Support

With assistance, carefully lift your TV and hook the attached TV brackets onto the front support of the stand. Ensure the TV is securely seated. Tighten any locking screws on the TV brackets to prevent accidental dislodgement.

Step 8: Attach Cable Management

Use the included cable clips to route and organize your TV cables along the support pillar for a clean and streamlined appearance.

조립 비디오 가이드

Video: A detailed assembly guide for the Perlegear PGTVS05 TV stand, demonstrating each step from unboxing to final TV mounting.

Video: A concise assembly demonstration for the Perlegear PGTVS05 TV stand, highlighting key installation points and features.

작동 지침

높이 조정

The swivel TV stand offers 3 support pillar height settings, allowing you to position your screen closer to eye level for optimal comfort. To adjust the height, loosen the securing screws on the upper support pillar, slide it to your desired height (17.72" to 20.87" tall), and then re-tighten the screws firmly.

Image: Visual representation of the three available height settings (17.72", 19.29", 20.87") for the TV stand.

스위블 기능

The TV base stand allows for a 35° swivel left or right. Gently push the TV to adjust its angle, directing the screen towards your viewing position for a great view 방의 어느 곳에서나.

Image: A TV on the stand swiveling left and right by 35 degrees, illustrating the adjustable view잉 각도.

유지

To ensure the longevity and safe operation of your TV stand, please follow these maintenance guidelines:

• 청소: 부드러운 d를 사용하세요amp cloth to clean the tempered glass base and metal components. Avoid abrasive cleaners or solvents that may damage the finish.
• 연결 확인: 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 안정성을 유지하기 위해 필요하면 다시 조이세요.
• 무게 분포 : Ensure the TV's weight is evenly distributed on the stand and does not exceed the maximum weight capacity.

문제 해결

If you encounter any issues with your Perlegear PGTVS05 TV stand, please refer to the following common solutions:

• 불안정: Ensure all assembly screws are fully tightened. Verify the TV's weight and VESA pattern are within the specified limits. Check that the non-slip pads are correctly applied to the base.
• 높이/회전 조절에 어려움이 있습니다. Ensure no cables are obstructing movement. Check that securing screws for height adjustment are sufficiently loosened before attempting to change height.
• 부품 누락 또는 구성 요소 손상: Do not proceed with assembly. Contact Perlegear customer service immediately for assistance.

명세서

Image: Detailed product dimensions of the assembled TV stand, including height, width, and depth measurements.

보증 및 지원

For any questions or concerns regarding your Perlegear PGTVS05 Universal TV Stand, please contact our U.S.-based customer service team. We are committed to providing dependable products and excellent support.

• 기술 지원: Available for assembly assistance and product inquiries.
• 품질 보증: Products undergo comprehensive safety testing.