Lockly Smart Lock Model 7S User Manual

소개

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Lockly Smart Lock Model 7S. Please read this guide thoroughly before installation and use to ensure proper functionality and security.

Figure 1: Lockly Smart Lock Model 7S and its smartphone application interface.

상자 안에 무엇이 들어있나요?

Your Lockly Smart Lock Model 7S package includes the following components:

• Exterior Assembly with PIN Genie® Digital Keypad
• Interior Assembly with battery compartment and thumb turn
• 데드 볼트 래치
• 장착 플레이트
• 스트라이크 플레이트와 스트라이크 박스
• 실물 키(2개)
• Installation Hardware (screws, spindle)
• AA 배터리 (4)

필요한 도구

설치를 위해서는 다음 도구가 필요합니다:

• Phillips 헤드 스크루 드라이버
• 납작한 스크루 드라이버
• 테이프 측정기 또는 자

설치 가이드

Follow these steps to install your Lockly Smart Lock Model 7S. For a visual guide, please refer to the installation video below.

1. 문을 준비하세요

• 문에서 기존 잠금장치 하드웨어를 제거하세요.
• Ensure your door thickness is between 1-3/8 inches (35mm) and 2 inches (50mm).
• Verify the cross-bore hole is 2-1/8 inches (54mm) in diameter and the edge-bore hole is 1 inch (25mm) in diameter.
• Confirm the backset is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).

Figure 2: Door compatibility diagram illustrating required measurements for installation.

2. 데드볼트 설치

• Adjust the deadbolt length if necessary to match your door's backset (default is 2-3/4 inches).
• Insert the deadbolt into the edge-bore hole, ensuring the slot aligns with the center of the cross-bore hole.
• Secure the deadbolt with the provided screws (K).
• Ensure the 'UP' marking on the deadbolt is facing upwards and the slot is in a vertical position.

3. 외부 어셈블리 설치

• Insert the torque blade through the deadbolt slot.
• Guide the connection cables through the cross-bore hole, underneath the deadbolt.
• Align and secure the exterior assembly flush to the exterior door surface.

4. 마운팅 플레이트 설치

• Remove the adhesive strips from the mounting plate.
• Align and secure the mounting plate (M) to the interior side of the door, ensuring the connection cable is guided through the lower left notched hole.
• Insert and hand-tighten the two screws (G) located on the left and right of the blade.
• Check alignment and fully tighten with a screwdriver.

5. 내부 어셈블리 설치

• Plug the connection cable from the mounting plate into the interior assembly. Ensure the red side of the plug matches the red side of the socket.
• Tuck the cable under the eyelet hooks and route it to the right on the interior assembly.
• Ensure the thumb turn on the interior assembly is in the vertical position.
• Place the interior assembly against the mounting plate, making sure the torque blade is inserted into the thumb turn shaft.
• Secure the interior assembly to the mounting plate with the two screws (I).

6. Install Batteries and Perform Self-Check

• With the door open and the deadbolt fully extended, insert three of the four AA batteries into the interior assembly.
• Press and hold the 'Program' button. While holding, insert the fourth battery.
• The lock will automatically begin a self-check. Release the 'Program' button once the check starts.
• If the lock is not properly installed, it will repeatedly open and close. Recheck installation steps if this occurs.
• Once the self-check completes, manually lock and unlock the door using the thumb turn to ensure smooth operation without binding or rubbing.

7. 배터리 커버 설치

• Install the battery cover (H) and secure it with the screw on top.

설정 및 구성

To complete the setup and unlock the full potential of your Lockly Smart Lock, download the Lockly app.

• Download the Lockly app from the Apple App Store or Google Play Store.
• 계정에 등록하거나 로그인하십시오.
• Follow the on-screen instructions within the app to add your new Lockly Smart Lock.

Figure 3: The Lockly app provides remote control, notifications, and access history.

작동 지침

Your Lockly Smart Lock Model 7S offers multiple ways to secure and access your property.

그림 4: 이상view of the various methods to unlock your Lockly Smart Lock.

1. PIN Genie® Digital Keypad

• The patented PIN Genie® keypad features dynamic shuffling of digit locations after every use, preventing others from guessing your code based on finger smudges.
• To unlock, touch the keypad to activate, enter your 6-digit code, and press the Lockly button.

Figure 5: The PIN Genie® keypad's dynamic number display enhances security.

2. 스마트폰 앱 제어

• Use the Lockly app to lock and unlock your door remotely (requires optional Wi-Fi hub, sold separately).
• Receive real-time monitoring and alerts on your smartphone.
• Access a history log of door activity.

3. 음성 제어

• Integrate with Amazon Alexa or Google Assistant for hands-free control (requires optional Wi-Fi hub, sold separately).
• Example command: "Hey Alexa, unlock the door."

Figure 6: Voice control integration with smart home assistants for convenient access.

4. 물리적 키

• A traditional physical key is provided for manual override in case of battery depletion or electronic malfunction.

5. Programmable Auto-Lock

• The auto-lock feature can be customized to automatically lock your door after a set period (5-300 seconds).

Figure 7: The programmable auto-lock feature provides peace of mind by automatically securing your door.

6. eKeys and eBadges

• Grant revocable access to family, friends, or visitors via the Lockly app.
• eKeys and eBadges allow users to unlock the door using their smartphone.

Figure 8: eKeys and eBadges offer flexible and secure access management for guests.

7. Offline Access Codes™

• Generate single-use or limited-use access codes that can be used offline, without Wi-Fi or internet connection.
• Three free Offline Access Codes are provided per month; subscribe to LocklyOS™ for more.

Figure 9: Offline Access Codes provide convenient entry for guests without requiring internet access.

유지

배터리 교체

• The Lockly Smart Lock Model 7S requires 4 AA alkaline batteries (included).
• Expected battery life is 9+ months under normal usage.
• Replace batteries when the low battery indicator appears on the keypad or in the app.
• To replace, remove the battery cover on the interior assembly, replace all four batteries, and reattach the cover.

문제 해결

If you encounter issues with your Lockly Smart Lock, consider the following:

• Lock not operating smoothly: Ensure the deadbolt and interior assembly are correctly aligned and tightened. Check for any binding or rubbing during manual operation.
• 키패드가 응답하지 않습니다. Check battery levels. If batteries are low or depleted, replace them. Use the physical key for immediate access.
• Lock repeatedly opening/closing after battery installation: This indicates an improper installation. Revisit the installation steps, particularly the self-check procedure.
• Remote access/voice control not working: Verify that the optional Lockly Secure Link Wi-Fi Hub is properly installed and connected to your home network.

명세서

보증 정보

The Lockly Smart Lock Model 7S comes with a limited 1-year mechanical, finish, and electronics warranty.

고객 지원

Lockly provides 24/7 technical support. If you have any questions or require assistance, please contact our professional customer service team via phone, email, or online chat.

For more information and support resources, visit: LOCKLY.com/지원