Link2Home Extend & Tilt TV Wall Mount Instruction Manual

1. 서론

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Link2Home Extend & Tilt TV Wall Mount. Designed for televisions ranging from 42 to 90 inches and supporting up to 154 pounds, this mount offers versatile viewing options with its extendable, swivel, and tilt features. Please read all instructions carefully before beginning installation.

주요 특징:

• Universal TV Wall Mount for 42" to 90" screen sizes.
• Supports up to 154 pounds.
• Compatible with Flat and Curved Screen TVs & Monitors.
• 찬성file extends 3.1" to 5.3" from the wall.
• Open architecture for increased ventilation and easy access to wires.
• Adjustable tilt range: +5° to -12°.
• Adjustable swivel range: +5° to -5°.
• Screen level adjustment: +-0.98".
• Easy-grip knobs for quick, toolless tilt and lock.
• Anti-theft locking hole (padlock not included).
• Automatic click-in spring lock for secure hold.
• VESA compatibility: 200x200 mm to 600x400mm.
• Includes all necessary hardware and a built-in level.
• Mounts on wood studs, brick, concrete, and sheetrock/plasterboard walls.

2. 안전 정보

• 중량 용량: Do not exceed the maximum weight capacity of 154 lbs (70 kg). This mount is designed for use with specified maximum weights. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
• 화면 크기: This mount is suitable for TVs between 42" and 90".
• 장착 표면: 설치 표면이 장비와 모든 부착된 하드웨어의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
• 전문적인 설치: 설치 과정이나 벽면 적합성에 대해 확신이 서지 않는다면 자격을 갖춘 전문가와 상담하십시오.
• VESA 호환성: Verify your TV's VESA mounting pattern (distance between screw holes on the back of the TV) is within the supported range of 200x200mm to 600x400mm.
• 도구: 설치 시 적절한 도구를 사용하세요. 항상 보안경을 착용하세요.
• 어린이들: 설치 장소에 어린이가 접근하지 못하도록 하십시오.

3. 패키지 내용

Your Link2Home Extend & Tilt TV Wall Mount package includes the following components and hardware:

• 벽판 조립체
• TV 브래킷 (좌측 및 우측)
• Assorted TV Screws, Washers, and Spacers
• Lag Bolts and Wall Anchors (for various wall types)
• 내장 레벨
• Cable Ties (for cord management)
• 사용 설명서

4. 설정 및 설치

Follow these steps carefully to install your TV wall mount:

1단계: TV 브래킷을 TV에 부착하세요

1. TV에 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 TV 화면이 아래로 향하게 조심스럽게 놓으십시오.
2. TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's VESA pattern.
4. Attach the left and right TV brackets to the back of your TV, ensuring they are securely fastened. The hooks on the brackets should face upwards.

2단계: 벽면에 설치 위치를 정합니다.

1. TV를 설치할 원하는 높이를 정하세요.
2. Use a stud finder to locate wood studs in your wall. Mark the edges and center of the studs. For brick or concrete walls, ensure you have the correct anchors.
3. Hold the wall plate against the wall at your desired height and use the built-in level to ensure it is perfectly horizontal. Mark the pilot hole locations.

3단계: 벽면 플레이트를 벽에 장착합니다.

1. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type (wood, brick, concrete).
2. If installing into concrete or brick, insert the appropriate wall anchors into the pilot holes.
3. Align the wall plate with the pilot holes and secure it to the wall using the provided lag bolts. Tighten all bolts firmly.

4단계: 벽걸이 플레이트에 TV를 걸기

1. With assistance, carefully lift the TV and hook the attached TV brackets onto the wall plate.
2. Ensure both TV brackets are properly seated and engaged with the wall plate. The automatic click-in spring lock will snap into place for a secure hold.

설치 비디오 :

5. 사용 설명서

Your Link2Home Extend & Tilt TV Wall Mount offers flexible view잉 각도:

기울기 조정:

• To adjust the vertical tilt angle (+5° to -12°), loosen the easy-grip knobs on the TV brackets.
• Adjust the TV to your desired tilt angle.
• Tighten the easy-grip knobs to lock the TV in place.

회전 조절:

• The mount allows for a swivel range of +5° to -5°. Gently push or pull the side of the TV to achieve the desired horizontal view잉 각도.

확장/수축:

• The mount can extend from 3.1" to 5.3" from the wall. Gently pull the TV forward or push it back towards the wall.

Accessing Wires:

• The extendable profile and open architecture provide easy access to cables and ports on the back of your TV.

6. 유지관리

• 정기 검사: Periodically check that all screws and bolts are securely tightened.
• 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 매끄럽게 하기: 움직이는 부품에는 윤활유가 필요하지 않습니다.

7. 문제 해결

• TV 수평이 맞지 않음: Use the screen level adjustment feature by twisting the screws on the arms for micro-adjustment. Ensure the wall plate was installed level using the built-in level.
• Difficulty Adjusting Tilt/Swivel: Ensure the easy-grip knobs are sufficiently loosened before attempting to adjust the tilt. For swivel, apply gentle, even pressure.
• TV 방송이 좀 느슨하게 느껴져요: Double-check that all mounting bolts on the wall plate and TV brackets are securely tightened. Ensure the automatic click-in spring lock is engaged.
• Cannot Remove TV from Mount: Pull the release strings located at the bottom of the TV brackets to disengage the locking mechanism.

8. 사양

9. 보증 및 지원

The Link2Home Extend & Tilt TV Wall Mount comes with a 평생 보증. For any questions, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Link2Home web대지.