Arducam 64MP Hawkeye 초고해상도 자동 초점 카메라 모듈(라즈베리 파이용) 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Arducam 64MP Hawkeye Ultra High-Resolution Autofocus Camera Module. This camera module is designed for use with various Raspberry Pi boards, offering high-resolution imaging capabilities and autofocus functionality.

주요 특징:

• 64MP ultra-high resolution (9152 x 6944) for still images.
• Autofocus lens with up to 10x digital zoom.
• Compatible with Raspberry Pi 5/4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH.
• MIPI CSI-2 interface.
• Supports manual focus control via software.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x 64MP-AF Camera Board
• 1 x 15cm 15pin FPC Cable
• 1 x 15cm 15pin to 22pin FPC Cable

Image: The Arducam 64MP Hawkeye camera module shown with both the 15cm 15pin FPC cable and the 15cm 15pin to 22pin FPC cable, which are included in the package.

3. 설정

Follow these steps to connect and prepare your Arducam 64MP Hawkeye camera module with your Raspberry Pi.

3.1 하드웨어 연결

1. 라즈베리 파이의 전원이 꺼져 있고 모든 전원 공급 장치에서 분리되어 있는지 확인하십시오.
2. Locate the MIPI CSI-2 camera interface on your Raspberry Pi board. This is typically a long, narrow connector.
3. Gently pull up the plastic clip on the camera connector.
4. Insert the FPC (Flexible Printed Circuit) cable from the camera module into the connector. Ensure the silver contacts on the FPC cable face the correct direction (towards the HDMI port on most Raspberry Pi models). Use the appropriate FPC cable (15pin or 22pin) based on your Raspberry Pi model.
5. Push the plastic clip back down to secure the FPC cable.
6. Connect the other end of the FPC cable to the Arducam 64MP Hawkeye camera module.

Image: The Arducam 64MP Hawkeye camera module with its flexible printed circuit (FPC) cable, ready for connection to a Raspberry Pi board.

Image: A visual comparison showing the Arducam 64MP Hawkeye camera module connected to both a Raspberry Pi 4B (left) and a Raspberry Pi 5 (right), illustrating compatibility.

3.2 소프트웨어 구성

The Arducam 64MP Hawkeye camera module requires specific software configuration on your Raspberry Pi. It is compatible with Raspberry Pi OS (Debian Bullseye) and utilizes the libcamera application framework.

1. Power on your Raspberry Pi after connecting the camera module.
2. Ensure your Raspberry Pi OS is updated to the latest version of Bullseye.
3. Install necessary camera drivers and libraries. Refer to the official Arducam documentation for the most up-to-date installation guide. A quick guide for Raspberry Pi is often available at bit.ly/64MP-Guide-for-Raspberry-Pi.
4. After installation, you can test the camera using libcamera commands or the provided pre-compiled program for easy access.

4. 사용 설명서

Once the camera module is successfully set up, you can begin capturing images and video.

4.1 이미지 및 비디오 캡처

사용하세요 libcamera tools or Arducam's provided software to capture high-resolution images and video. The camera supports a maximum still image resolution of 9152 x 6944 pixels and video capture up to 1080p.

4.2 자동 초점 및 수동 초점

The 64MP Hawkeye module features a built-in autofocus motor. This allows for quick and automatic focusing. Additionally, manual focus can be controlled through software commands, providing precise control over the focal point.

• 자동 초점 : The camera will automatically adjust its focus to achieve a clear image.
• 수동 초점: Specific software commands can be used to set the focus distance manually. Refer to the Arducam autofocus guide (e.g., bit.ly/16MP-64MP-Autofocus-Guide) for detailed instructions.

4.3 디지털 줌

The camera supports up to 10x digital zoom, which can be controlled via software. Digital zoom magnifies the image electronically, which may affect image quality at higher zoom levels.

이미지: 콜라주 쇼asing various images captured using the Arducam 64MP Hawkeye camera module, demonstrating its high-resolution capabilities in different environments.

5. 유지관리

Proper care and maintenance will ensure the longevity and optimal performance of your camera module.

• Keep the camera lens clean and free from dust and fingerprints. Use a soft, lint-free cloth specifically designed for optics.
• Avoid exposing the module to extreme temperatures, humidity, or direct sunlight for extended periods.
• Handle the FPC cable and connectors with care to prevent damage.
• Store the module in a dry, dust-free environment when not in use.

6. 문제 해결

If you encounter issues with your Arducam 64MP Hawkeye camera module, refer to the following common troubleshooting steps:

• 카메라가 감지되지 않았습니다:
  • Ensure the FPC cable is correctly inserted and securely latched on both the camera module and the Raspberry Pi. Verify the cable orientation.
  • Confirm that the Raspberry Pi is running a compatible operating system (e.g., Raspberry Pi OS Bullseye) and that camera support is enabled in the configuration.
  • Check for any loose connections or damage to the FPC cable.
• 이미지 품질이 좋지 않음:
  • Clean the camera lens with a suitable optical cleaning cloth.
  • Verify that the camera is properly focused. If autofocus is not performing as expected, try manual focus adjustments.
  • 주변 환경에 적절한 조명을 확보하세요.
• 소프트웨어 호환성 문제:
  • Some users have reported compatibility challenges with newer Raspberry Pi OS versions (e.g., Bookworm) and libcamera. Always refer to the latest official Arducam documentation and community forums for updated drivers and solutions.
  • Ensure all necessary software packages for camera operation are installed and up-to-date.

For further assistance, please contact Arducam technical support.

7. 사양

Detailed technical specifications for the Arducam 64MP Hawkeye Ultra High-Resolution Autofocus Camera Module:

8. 보증 및 지원

Arducam provides technical support for its products. If you encounter any issues or require assistance with your 64MP Hawkeye camera module, please contact Arducam directly through their official support channels.

자세한 정보와 리소스를 보려면 다음을 방문하세요. 아르두캄 스토어 아니면 그들의 공식 web대지.