소개
This manual provides essential information for the safe and efficient use of your HPE ProLiant DL380 G10 Plus 2U Rack Server. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The HPE ProLiant DL380 G10 Plus is a versatile 2U rack server designed for demanding workloads, offering high performance and expandability. It features an Intel Xeon Gold 5315Y processor, 32 GB RAM (expandable to 2 TB), and a 12Gb/s SAS controller.
안전 정보
부상과 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 모든 전기 연결에 대해 적절한 접지가 이루어졌는지 확인하세요.
- Do not operate the server with covers removed.
- Disconnect power before performing any maintenance or upgrades.
- Install the server in a well-ventilated area to prevent overheating.
- Use only HPE-approved components and accessories.
설치 가이드
1. 개봉 및 검사
Carefully remove the server from its packaging. Inspect for any signs of shipping damage. Report any damage to your carrier and reseller immediately.
그림 1: 전면 view of the HPE ProLiant DL380 G10 Plus 2U Rack Server. This image shows the server's front panel, including drive bays and control buttons.
2. 랙 설치
The HPE ProLiant DL380 G10 Plus is a 2U rack-mountable server. Follow the instructions provided with your rack rail kit for secure installation into a standard 19-inch server rack.
- Attach the rail kit to the server and the rack.
- Slide the server into the rack until it clicks into place.
- Secure the server to the rack using the provided screws.
3. 주변 장치 및 전원 연결
Connect necessary peripherals such as keyboard, mouse, and monitor (if applicable) to the server's rear ports. Connect network cables to the appropriate Ethernet ports. Finally, connect the power cords to the server's power supply units and then to a grounded power outlet.
작동 지침
1. 초기 전원 켜기
Press the power button on the front panel of the server. Observe the POST (Power-On Self-Test) sequence. The server will typically boot into the installed operating system or a pre-boot environment.
2. Accessing iLO (Integrated Lights-Out)
HPE iLO provides remote server management capabilities. To access iLO, connect a network cable to the iLO dedicated management port and configure its IP address through the server's BIOS/UEFI settings or via DHCP.
- 열기 web browser and enter the iLO IP address.
- Log in using the credentials found on the iLO default password tag (usually on the server chassis).
3. 운영체제 설치
Refer to your operating system's documentation for detailed installation procedures. HPE provides drivers and firmware updates on its official support web대지.
유지
1. 정기적인 청소
Periodically clean the server's exterior and ventilation openings to ensure optimal airflow. Use a soft, dry cloth. Do not use liquid cleaners directly on the server.
2. 펌웨어 및 드라이버 업데이트
HPE 지원 페이지를 정기적으로 확인하세요. website for the latest firmware and driver updates for your DL380 G10 Plus server. Keeping components updated ensures stability, performance, and security.
3. 부품 교체
For replacing components like hard drives, memory modules, or power supplies, always refer to the specific service manual for the HPE ProLiant DL380 G10 Plus. Ensure the server is powered off and disconnected from power before opening the chassis.
문제 해결
This section provides solutions to common issues. For more complex problems, consult the HPE support documentation or contact technical support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 서버 전원이 켜지지 않습니다. | No power, faulty power supply, loose connection. | Check power cords, verify power outlet, test with another power supply if available. |
| System hangs during boot. | Faulty RAM, incorrect BIOS settings, corrupted OS. | Reseat RAM modules, reset BIOS to default, attempt OS repair or reinstallation. |
| 네트워크 연결 문제. | Loose cable, incorrect network settings, faulty NIC. | Check network cables, verify IP configuration, update NIC drivers, test with a different port or NIC. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | HPE ProLiant DL380 G10 Plus |
| 부품 번호 | P55248-B21 |
| 폼 팩터 | 2U 랙 |
| 프로세서 | 1 x Intel Xeon Gold 5315Y 3.20 GHz (supports 2 processors) |
| 칩셋 | 인텔 C621A |
| 메모리 | 32 GB RAM (expandable up to 2 TB) |
| 스토리지 컨트롤러 | 12Gb/s SAS Controller |
| 제도법 | Up to 16 MB Graphic Card |
| 패키지 크기 | 37.4 x 23.23 x 10.63 인치 |
| 품목 무게 | 56.1파운드 |
| CPU 소켓 | LGA 1151 |
| 보조 캐시 | 16메가바이트 |
보증 및 지원
Your HPE ProLiant DL380 G10 Plus server is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official HPE support web대지.
For technical assistance, product registration, or to download the latest drivers and firmware, please visit the HPE 지원 web대지. You may also contact HPE technical support directly using the contact information provided on their web대지.
메모: Protection plans may be available for extended coverage. Check with your reseller for options like the 4-Year Protection Plan or Complete Protect monthly plan.