소개
Thank you for choosing the Minoston MT10W WiFi Timer Switch. This smart countdown timer switch allows you to control lights, fans, and heaters with preset countdown times and remote access via a smartphone application. It integrates seamlessly with Amazon Alexa and Google Assistant for voice control. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and safety.
이미지: 앞면 view of the Minoston MT10W WiFi Timer Switch and its retail packaging, highlighting key features and certifications.
중요한 안전 정보
- 화재, 감전 또는 부상의 위험이 있습니다.
- 이 장치는 National Electric Code 및 현지 규정에 따라 설치하도록 되어 있습니다.
- 이 지침의 어떤 부분이라도 확실하지 않다면 자격을 갖춘 전기 기술자에게 문의하십시오.
- Always turn off power at the circuit breaker or fuse box before installation or servicing.
- NEUTRAL WIRE REQUIRED. Ensure your electrical box has a neutral wire.
- Do not use with dimmable fixtures or 3-way switches.
- 작동 온도: 32°F ~ 104°F(0°C ~ 40°C).
- 실내에서만 사용하세요.
패키지 내용
- Minoston MT10W WiFi Timer Switch
- 사용 설명서
- 장착 나사
- 와이어 너트
명세서
| 모델 번호 | MT10W |
| 힘 | 120VAC, 60Hz |
| 백열등 부하 | 960W (1200W Tungsten) |
| 모터 부하 | 1 / 2 HP |
| 저항 부하 | 1800와트 |
| Wi-Fi 주파수 | 2.4GHz |
| 작동 온도 | 32°F ~ 104°F(0°C ~ 40°C) |
| 습기 | 95 % RH, 비 응축 |
| 인증 | ETL, FCC |
| 치수 | 4.5 x 3 x 10.49cm(1.77 x 1.18 x 4.13인치) |
Image: Diagram showing the physical dimensions of the Minoston MT10W WiFi Timer Switch, including depth reduction for easier installation.
설치 가이드
배선도
The Minoston MT10W requires a neutral wire for proper operation. Please follow the diagram below carefully.
Image: Detailed wiring diagram for the Minoston MT10W WiFi Timer Switch, showing connections for Line, Load, Neutral, and Ground wires. A note emphasizes the requirement for a neutral wire.
설치 단계
- 전원 끄기: Before beginning, turn off the power to the switch location at the circuit breaker or fuse box.
- 오래된 스위치 제거: 기존 벽면 플레이트와 스위치를 배전반에서 조심스럽게 제거하십시오.
- 전선 식별: Identify the Line (hot), Load, Neutral, and Ground wires. A neutral wire is typically white. If you do not have a neutral wire, this switch is not compatible.
- 전선을 연결하십시오:
- Connect the Line wire from the wall box to the Line terminal on the MT10W switch.
- Connect the Load wire from the wall box to the Load terminal on the MT10W switch.
- Connect the Neutral wire from the wall box to the Neutral terminal on the MT10W switch.
- Connect the Ground wire from the wall box to the Ground terminal on the MT10W switch.
- 마운트 스위치: 전선이 연결된 스위치를 전기 박스에 조심스럽게 밀어 넣으세요. 제공된 나사를 사용하여 고정하세요.
- 벽면 플레이트 설치: 새 벽면판이나 기존 벽면판을 부착합니다.
- 전원 복구: 회로 차단기를 다시 켜세요.
Wi-Fi and App Setup
The Minoston MT10W can be controlled via the Smart Life or Minoston APP. Ensure your Wi-Fi network is 2.4GHz.
- 앱 다운로드 : Download the "Smart Life" or "Minoston" app from the App Store (iOS) or Google Play Store (Android).
- 등록/로그인: 앱을 열고 새 계정을 등록하거나 이미 계정이 있다면 로그인하세요.
- 장치 추가:
- Tap "+" or "Add Device" in the app.
- Select "Electrical" > "Switch (Wi-Fi)" or search for "MT10W".
- Follow the in-app instructions to put the switch into pairing mode. This usually involves holding the "30 Min" button for 5 seconds until the blue LED indicator flashes quickly.
- 2.4GHz Wi-Fi 네트워크 이름과 비밀번호를 입력하세요.
- Wait for the device to connect. Once connected, you can rename the switch.
Image: Screenshot of the mobile application interface demonstrating remote control of the Minoston MT10W WiFi Timer Switch.
Voice Control Setup (Alexa/Google Assistant)
- Ensure your Minoston MT10W switch is successfully added to the Smart Life/Minoston app.
- Amazon Alexa 또는 Google Home 앱을 엽니다.
- "기술 및 게임"(Alexa) 또는 "Google 연동"(Google Home)으로 이동하세요.
- 검색 "Smart Life" (or "Minoston" if available) and enable the skill.
- Link your Smart Life/Minoston account with your Alexa/Google account.
- Discover devices. You can now control your switch using voice commands like "Alexa, turn on the timer for 30 minutes" or "Hey Google, turn off the fan."
Image: Illustration of a user interacting with an Amazon Echo device to control the Minoston MT10W WiFi Timer Switch via voice commands.
작동 지침
버튼 기능
The Minoston MT10W features an ON/OFF override button and six preset countdown buttons.
Image: Diagram illustrating the various buttons on the Minoston MT10W WiFi Timer Switch and their corresponding functions, including ON/OFF override, preset countdowns, and LED brightness adjustments.
- ON/OFF Override Button:
- Press to manually turn the connected device ON or OFF.
- Hold for 3 seconds to exit countdown mode. Press again to resume countdown mode.
- Preset Countdown Buttons (5 Min, 10 Min, 30 Min, 60 Min, 2 Hour, 4 Hour):
- Press any button to activate the corresponding countdown timer. The connected device will turn ON and automatically turn OFF after the selected duration.
- 5 Min Button (Hold for 3s): Turn off or resume the 6 LED indicators of the countdown.
- 10 Min Button (Hold for 3s): Dim the LED indicator (backlight) of the ON/OFF button.
- 2 Hour Button (Hold for 3s): Dim LED indicators of all 7 buttons to minimum brightness. All LED indicators flash on minimum brightness.
- 4 Hour Button (Hold for 3s): Brighten LED indicators of all 7 buttons to maximum brightness. All LED indicators flash on maximum brightness.
- 30 Min Button (Hold for 5s): Until blue LED indicator flashes quickly, Wi-Fi network configuration is displayed (for pairing mode).
LED 표시등
The amber LED indicator light provides soft illumination, making it easy to locate the switch in the dark.
Image: Close-up of the Minoston MT10W WiFi Timer Switch showing the amber LED indicator light, designed for visibility in low-light conditions.
에너지 절약 기능
Utilizing the countdown timer helps save electricity by ensuring devices like fans, ceiling lights, and other appliances automatically turn off after a set period, preventing unnecessary energy consumption.
Image: A Minoston MT10W WiFi Timer Switch installed in a bathroom setting, illustrating its use for energy saving by automatically turning off lights or exhaust fans.
유지
- Clean the switch surface with a soft, damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- Ensure the switch is not exposed to excessive moisture or direct water spray.
- Regularly check for any loose wiring connections during routine electrical inspections (by a qualified electrician).
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스위치의 전원이 켜지지 않습니다. | No power at the circuit breaker; incorrect wiring; neutral wire not connected. | Check circuit breaker. Verify wiring connections according to the diagram. Ensure neutral wire is connected. |
| Wi-Fi에 연결할 수 없습니다. | Incorrect Wi-Fi password; not 2.4GHz network; switch not in pairing mode; too far from router. | Verify Wi-Fi password. Ensure you are connecting to a 2.4GHz network. Put switch into pairing mode (hold 30 Min button for 5s). Move router closer or use a Wi-Fi extender. |
| 음성 제어가 작동하지 않습니다. | 스킬이 활성화되지 않았습니다. 계정이 연결되지 않았습니다. 기기 이름이 잘못되었습니다. | Ensure "Smart Life" skill is enabled and accounts are linked in Alexa/Google Home app. Check device name in app and use that name for voice commands. |
| Countdown not working. | Switch is in override mode. | Hold the ON/OFF button for 3 seconds to exit override mode and resume countdown functionality. |
보증 및 지원
Minoston products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Minoston web대지.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Minoston Customer Service:
- Web대지: www.minoston.com
- 이메일: support@minoston.com
Please have your model number (MT10W) and purchase date ready when contacting support.
