소개
Thank you for choosing the WALI Triple Monitor Stand (GMF003). This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor stand. Please read this manual thoroughly before assembly and retain it for future reference.
Figure 1: WALI Triple Monitor Stand (GMF003) with three monitors.
안전 정보
Please ensure all instructions are read and understood before installation and use. If you have any doubts regarding any part of this installation, please contact customer support. This product is designed for indoor use only. Improper installation or use may cause damage or serious injury. Do not exceed the weight capacity of 22 lbs (10 kg) per arm. Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
패키지 내용
패키지에는 다음 품목이 포함됩니다.
- 1 x WALI Free-standing Triple Monitor Mount (Black)
- 1 x 장착 하드웨어 키트
- 1 x 사용자 설명서
명세서
| 상표 | 왈리 |
| 모델 번호 | 지엠에프003 |
| 장착 유형 | Tabletop Mount (Free-standing or Grommet) |
| 이동 유형 | 관절 |
| 호환 장치 | 모니터 |
| 최대 화면 크기 | 27 inches per screen |
| 중량 용량 | 팔당 22kg(10파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 최대 기울기 각도 | 90도 |
| 색상 | 검은색 |
| 재료 | 금속 |
| 품목 무게 | 13.59파운드 |
| 패키지 크기 | 17.6 x 12.8 x 3.62 인치 |
Figure 2: Display compatibility details including screen size, VESA, and weight capacity.
Figure 3: Overall product dimensions of the WALI Triple Monitor Stand.
설치
Follow these steps to assemble and install your WALI Triple Monitor Stand. Refer to the included mounting hardware kit for specific components.
- 받침대를 부착하세요: Secure the rubber feet to the bottom of the weighted base to prevent scratching and ensure stability.
- Assemble Pole to Base: Attach the main pole to the weighted base using the provided screws and Allen key. Ensure it is tightened securely.
- Install Horizontal Arms: Slide the horizontal arm assembly onto the main pole. Secure it at the desired height using the locking mechanism.
- Install Top Monitor Arm: Slide the single monitor arm for the top display onto the main pole above the horizontal arms. Secure it at the desired height.
- 모니터에 VESA 플레이트를 부착하세요: Screw the VESA mounting plates onto the back of each monitor. Ensure the screws are appropriate for your monitor's VESA pattern (75x75mm or 100x100mm).
- 모니터 장착: Carefully slide the monitors (with VESA plates attached) onto the arms. Ensure they are securely seated.
The stand offers installation flexibility with both a weighted base for free-standing use and a grommet base option for desks with a suitable hole (0.4" - 3" thickness).
Figure 4: The stand can be used with a weighted base or a grommet base for varied desk setups.
설치 비디오 가이드
Video 1: Official WALI installation guide for the GMF003 Triple Monitor Stand, demonstrating assembly steps.
운영 및 조정
The WALI GMF003 stand allows for various adjustments to achieve an ergonomic setup and optimize your view경험.
- 높이 조정: The monitors can be adjusted vertically along the main pole to your preferred viewing height. Loosen the locking mechanism, slide the arms to the desired position, and re-tighten.
- 경사: Each monitor can be tilted up to +/- 90 degrees to reduce glare and find the optimal view잉 각도.
- 받침: Monitors can swivel +/- 90 degrees horizontally, allowing for flexible screen positioning.
- 회전: Rotate monitors 360 degrees for landscape or portrait orientation.
- Arm Slide: Mounting holes parts can slide left and right on each arm, making it easier for monitors of different sizes to move side by side for perfect alignment.
Figure 5: Illustration of tilt, swivel, and rotation adjustments for individual monitors.
케이블 관리
Integrated cable management clips are provided to keep your workspace tidy and organized. Route monitor cables through these clips along the arms and down the main pole to reduce clutter.
그림 6: 예ample of cables routed through the integrated cable management system.
유지
To ensure the longevity and proper function of your monitor stand:
- 모든 나사와 연결부를 정기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
- 부드럽고 마른 천으로 스탠드를 닦으십시오. 연마성 세제나 용제는 사용하지 마십시오.
- Do not hang objects from the monitor arms or pole.
문제 해결
If you encounter any issues with your WALI Triple Monitor Stand, refer to the following common solutions:
- 모니터 수평이 맞지 않습니다. Ensure all VESA plates are securely attached and the horizontal arms are level. Adjust individual monitor tilt and rotation as needed.
- 스탠드가 불안정하게 느껴집니다. Verify that the base is placed on a flat, stable surface. Re-tighten all connection points, especially the pole to the base. Ensure monitors do not exceed the weight capacity.
- 모니터 위치 조정에 어려움이 있습니다. Check if all locking mechanisms are sufficiently loosened before attempting to adjust. Re-tighten after adjustment.
For further assistance, please contact WALI customer support.
보증 및 지원
WALI provides experienced and friendly US-based customer support available to assist 7 days a week. For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official WALI web대지.
