소개
This manual provides comprehensive instructions for the installation, adjustment, maintenance, and troubleshooting of your maXpeedingrods T6 Series Coilover Suspension Kit. Please read this manual thoroughly before attempting any installation or adjustment to ensure proper function and safety. Professional installation is recommended.
제품 특징
- 24 Levels of Rebound Force Adjustment: Allows fine-tuning of damping for various driving conditions.
- 높이 조절 : Customize ride height by 1-3 inches for a desired stance.
- High Tensile Performance Springs: Front spring rate of 10 kg/mm (560 lbs/in) and Rear spring rate of 7 kg/mm (392 lbs/in), tested for durability.
- 필로우 볼 탑 마운트: Designed for sharp and precise handling response.
- CNC Billet Aluminum Components: Durable and lightweight perches and locking rings.
- High Rigid Piston Rod: Features a 22mm front rod diameter with high-frequency heat treatment for strength and longevity.
- Optimized Damper Knob: Easier to operate and adjust damp설정합니다.
- Full Length Dust Boot: Protects the rod and piston from dust and debris.
- Surface Sandblasting Lower Mount: Provides excellent wear-resistant performance.
Image: Close-up of the pillow ball top mount, designed for enhanced handling.
Image: Details of the optimized damper knob for easy adjustment and upgraded full aluminum plates for strength.
장착 정보
This maXpeedingrods Coilover Suspension Kit (Model FC84PB) is compatible with the following vehicle models:
- Nissan 350Z Coupe RWD (Z33) 2003-2008
- Nissan 350Z Roadster Convertible RWD (Z33) 2003-2008
- Nissan Skyline Coupe RWD (V35) 2003-2007
- Infiniti G35 Coupe RWD (V35) 2003-2007
- Infiniti G35 Sedan RWD (V35) 2003-2006
메모: This kit is designed to lower the vehicle's ride height and does not maintain the original ride height.
구성품 목록
The maXpeedingrods T6 Series Coilover Suspension Kit typically includes the following components:
- 2x Front Coil-overs
- 2x Rear Shock Absorbers
- 2x Rear Spring Kits
- 2x C Spanners
- 2x Allen Wrenches
Image: Visual representation of the components included in the maXpeedingrods coilover kit packaging.
설치 지침
안전 예방 조치
- 안전 안경과 장갑 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 작업을 시작하기 전에 차량이 잭 스탠드나 리프트에 안전하게 고정되어 있는지 확인하십시오.
- 잭으로만 차량을 받친 상태에서 차량 아래에서 작업하지 마십시오.
- 전기 부품을 다루기 전에 배터리를 분리하십시오.
- 어떤 단계든 확신이 서지 않으면 자격을 갖춘 정비사에게 문의하십시오.
코일오버 어셈블리
The following steps detail the assembly of the coilover unit. Refer to the video for visual guidance.
Video: Detailed guide on how to assemble the maXpeedingrods coilover unit, showing each component being fitted.
- Begin by sliding the spring seat onto the damp어 몸.
- Next, install the upper locker, followed by the lower locker, onto the threaded body.
- Place the ring onto the damp어 막대.
- Slide the dust boot over the damp어 막대.
- Install the main spring onto the damper, ensuring it seats correctly.
- Place the spring plate on top of the spring.
- Position the top mount assembly over the damper rod and secure it.
- Add the washer and then tighten the locking nut onto the damper rod to secure the top mount.
- Adjust the spring preload correctly and lock it tight using the provided C spanners.
- If applicable, install the adjuster cover on the top mount.
차량 설치
This video demonstrates the installation process of the coilover system on a vehicle. While specific vehicle models may vary, the general steps and principles apply.
비디오: 끝view of the COT6 Series Coilover, including visual examples of installation on a vehicle.
- 차량을 안전하게 들어 올리고 바퀴를 분리하십시오.
- Carefully remove the original suspension components, following your vehicle's service manual.
- Install the assembled maXpeedingrods coilover units into the vehicle's suspension mounting points.
- Secure all bolts and nuts to the manufacturer's specified torque settings.
- Ensure brake lines and ABS sensor wires are clear of moving parts and properly secured.
- 휠을 다시 장착하고 차량을 내립니다.
- Perform a wheel alignment after installation to ensure proper handling and tire wear.
조정 및 작동
높이 조정
The coilover kit allows for independent ride height adjustment. To adjust the height:
- Loosen the lower locking ring on the threaded body.
- 메인 스프링 받침대를 돌려 차량의 높이를 조절하십시오.
- Once the desired height is achieved, tighten the lower locking ring securely against the spring perch.
- Ensure both sides of the vehicle are adjusted evenly.
Image: Illustration of height adjustable coilovers with independent ride height and spring tension settings.
Image: Visual guide on how to twist the threaded body to adjust the shock suspension to the preferred height.
Damp조정 (24단계)
The coilovers feature 24 levels of rebound force adjustment, allowing you to customize the ride feel from soft to hard. The adjustment knob is located on the top of the coilover unit.
- 레벨 0-8: Recommended for street use, providing a more comfortable ride.
- 레벨 9-16: Suggested for mountain roads or spirited driving, offering a balance of comfort and performance.
- 레벨 17-24: Ideal for race tracks, providing maximum stiffness for aggressive handling.
Image: Close-up of the adjuster knob, showing how to remove the cap and adjust damping with a spanner or by hand.
Image: Visual guide to the 24-level damping adjustment, with suggested settings for street, mountain, and track use.
유지
Regular maintenance helps ensure the longevity and performance of your coilovers.
- 정기 검사: Periodically check all mounting bolts, nuts, and locking rings for tightness. Inspect for any signs of wear, damage, or leaks.
- 청소: Keep the coilover bodies and threads clean from dirt, salt, and debris. This prevents corrosion and ensures smooth height adjustments.
- 매끄럽게 하기: Apply a thin layer of appropriate grease to the threads if they become stiff during adjustment.
- 먼지 방지 부츠: Ensure dust boots are intact and properly seated to protect the piston rods.
문제 해결
If you encounter issues with your coilover suspension, consider the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Unusual Noises (e.g., clunking, squeaking) | Loose mounting bolts, worn bushings, improper spring preload, damaged components. | Check all fasteners for tightness. Inspect bushings for wear and replace if necessary. Verify spring preload is set correctly. Inspect for damaged parts. |
| 차고 높이 불균형 | 높이 조절이 잘못되었거나 스프링 예압이 고르지 않습니다. | Re-measure and adjust ride height on all corners. Ensure spring preload is consistent across corresponding coilovers. |
| 승차감이 좋지 않음 (너무 딱딱하거나 너무 부드러움) | 잘못된 damp어 설정. | d를 조정하십시오amper settings (rebound force) according to your preference and driving conditions (refer to Damper Adjustment section). |
| Leaking Damper | Damaged seal or internal component. | A leaking damper typically requires replacement. Contact customer support for assistance. |
If troubleshooting steps do not resolve the issue, please contact maXpeedingrods customer support.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 맥스피딩로드 |
| 모델 번호 | FC84PB |
| 품목 무게 | 62.9파운드 |
| 제품 치수 | 27.56 x 19.69 x 7.48 인치 |
| 위치 | Front (Coilover kit includes components for both front and rear) |
| Damp어 조정 | 24 Levels Rebound Force |
| 전륜 스프링 강성 | 10kg/mm (560lbs/in) |
| 리어 스프링 강성 | 7kg/mm (392lbs/in) |
| 높이 조절 범위 | 1~3인치 낮추기 |
보증 및 지원
maXpeedingrods offers customer support for their products. For specific warranty details, technical assistance, or to report any issues, please refer to the warranty information provided with your purchase or contact maXpeedingrods directly through their official channels.
- 보고: 30-day easy returns are typically available.
- 고객 지원: maXpeedingrods provides customer support for product inquiries and assistance.
Image: Information regarding easy installation and available customer support from maXpeedingrods.
