소개
Thank you for choosing the Total Tools 20V 2Ah Battery Pack. This instruction manual provides important information on the safe operation, maintenance, and troubleshooting of your battery pack. Please read this manual thoroughly before first use and keep it for future reference.
This battery pack is designed to provide reliable power for your compatible Total Tools 20V cordless power tools, ensuring optimal performance and extended runtime.
안전 지침
화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.
- 충전 중: Only use chargers specified by Total Tools for this battery pack. Using an incompatible charger may cause fire, electric shock, or injury.
- 저장: Store the battery pack in a cool, dry place, away from direct sunlight, heat sources, and moisture. Do not store in temperatures exceeding 50°C (122°F).
- 손질: Do not short-circuit the battery terminals. Avoid dropping or subjecting the battery pack to strong impacts. Do not open, disassemble, or modify the battery pack.
- 처분: 배터리 팩은 지역 규정에 따라 책임감 있게 폐기하십시오. 가정용 쓰레기로 버리거나 소각하지 마십시오.
- 손상: If the battery pack is damaged, leaking, or shows signs of overheating, discontinue use immediately and contact Total Tools customer service.
- 어린이들: 배터리 팩은 어린이의 손이 닿지 않는 곳에 보관하십시오.
제품 끝view
Familiarize yourself with the components of your Total Tools 20V 2Ah Battery Pack:
- Battery Housing: 내구성이 뛰어난 casing protecting the internal cells.
- 배터리 분리 버튼: Used to detach the battery from the tool or charger.
- 충전 연락처: Metal terminals for connecting to a compatible charger.
- 배터리 표시 등: LEDs that show the current charge level of the battery.
그림 1: 상단 view of the battery pack, highlighting the charge indicator and branding.
그림 2: 측면 view of the battery pack, illustrating the release button.
그림 3: 하단 view of the battery pack, displaying the electrical contacts.
Figure 4: Battery pack held in hand, showing its compact size and approximate dimensions.
명세서
| 특징 | 사양 |
|---|---|
| 상표 | 총 |
| 모델 번호 | TFBLI20011 |
| 권tage | 20 볼트 |
| 배터리 용량 | 2.0 Amp에레아워(아) |
| 치수(길이 x 너비 x 높이) | 10 x 20 x 37cm |
| 품목 무게 | 209그램 |
| 색상 | 다색 |
설정
배터리 팩 충전
- Ensure you have a compatible Total Tools 20V battery charger.
- 충전기를 표준 전원 콘센트에 연결하세요.
- Slide the battery pack onto the charger, ensuring it clicks securely into place.
- 충전기의 표시등은 충전 상태를 보여줍니다. 자세한 표시등 패턴은 충전기 사용 설명서를 참조하십시오.
- Once fully charged, remove the battery pack from the charger. Do not leave the battery on the charger for extended periods after it is fully charged.
Note: For optimal performance, fully charge the battery pack before its first use.
운영
Attaching the Battery Pack to a Tool
- Ensure both the battery pack and the tool are clean and free of debris.
- Align the battery pack with the battery slot on your Total Tools 20V cordless power tool.
- Slide the battery pack firmly into the slot until you hear a click, indicating it is securely locked in place.
Detaching the Battery Pack from a Tool
- Press and hold the battery release button located on the battery pack.
- While holding the button, slide the battery pack out of the tool's battery slot.
배터리 충전 수준 확인
Press the battery indicator button (if available) on the battery pack. The LED lights will illuminate to show the remaining charge:
- All lights on: Full charge
- Fewer lights on: Decreasing charge level
- One light blinking: Low charge, recharge soon
유지
- 청소: Keep the battery pack and its terminals clean. Wipe with a dry, soft cloth. Do not use water or chemical cleaners.
- 저장: When not in use for extended periods, store the battery pack in a cool, dry place, ideally with a partial charge (around 50%). Avoid storing fully charged or fully discharged.
- 온도: Do not expose the battery pack to extreme temperatures. This can reduce battery life and performance.
- 정기적 사용: For best battery life, use and recharge the battery regularly. Avoid deep discharges.
문제 해결
Battery Pack Not Charging
- 충전기가 작동하는 콘센트에 제대로 꽂혀 있는지 확인하십시오.
- Verify that the battery pack is securely seated on the charger.
- 배터리 팩이나 충전기에 눈에 띄는 손상이 있는지 확인하세요. 손상된 경우 사용하지 마세요.
- 주변 온도가 권장 충전 범위(일반적으로 0°C~40°C / 32°F~104°F) 내에 있는지 확인하십시오.
Battery Pack Not Powering Tool
- Check if the battery pack is fully charged using the battery indicator lights.
- Ensure the battery pack is securely attached to the tool.
- Confirm that the tool itself is functioning correctly with another battery (if available).
- Verify that the battery pack is compatible with your specific Total Tools model.
If issues persist after following these steps, please contact Total Tools customer support.
보증 및 지원
Total Tools products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Total Tools web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
