SCULPFUN S10 레이저 조각기 사용 설명서

1. 서론

The SCULPFUN S10 Laser Engraver is a high-performance laser cutting and engraving machine designed for precision work on various materials, including wood and metal. It features a 10W optical power laser, an industrial-grade X-axis linear slide rail, and an air assist nozzle for enhanced cutting and engraving capabilities.

Figure 1: The SCULPFUN S10 Laser Engraver with various engraved and cut samples, 쇼casin다재다능함.

2. 안전 정보

WARNING: Laser radiation can cause eye injury and skin burns. Always wear appropriate laser safety goggles and ensure the protective cover is installed during operation. Never look directly into the laser beam.

• 기계를 무인으로 작동하지 마십시오.
• Ensure proper ventilation in the work area to dissipate fumes.
• Keep children under 14 years old away from the product. Children over 14 require adult supervision.
• 기계에 강한 충격을 가하지 마십시오.
• Do not use the laser directly on specular reflection objects, as this may cause injury or damage the laser.
• Always place an A4 steel pad or similar protective material under the workpiece to protect your table from laser damage.

Figure 2: The adjustable laser eye shield provides protection during operation. Always wear additional safety goggles.

3. 패키지 내용

상자를 풀 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

Figure 3: All components included in the SCULPFUN S10 package. Ensure all parts are accounted for before assembly.

• SCULPFUN S10 Laser Engraver Frame
• 10W 레이저 모듈
• Air Assist Nozzle and Tube
• 전원 어댑터
• USB 케이블
• 레이저 안전 고글
• A4 Steel Pad
• 조립 도구 및 나사
• Sample Wood Pieces
• 사용 설명서 (본 문서)

4. 설정

Follow these steps to assemble and prepare your SCULPFUN S10 Laser Engraver for first use:

1. 프레임 어셈블리: Assemble the aluminum frame components according to the included pictorial instructions. Ensure all screws are tightened securely.
2. 레이저 모듈 설치: Carefully attach the 10W laser module to the X-axis gantry. Connect the necessary cables.
3. Air Assist Setup: Connect the air assist tube to the laser module's nozzle. If using an external air compressor (sold separately), connect it to the air assist tube.
4. 전원 및 USB 연결: Connect the power adapter to the machine and a power outlet. Connect the USB cable from the machine to your computer.
5. 소프트웨어 설치: Install compatible laser engraving software such as LaserGRBL (for Windows) or LightBurn (for Windows and MAC). Refer to the software's documentation for detailed installation and setup.
6. 초점 조정: Adjust the laser focus according to the instructions in your software or the laser module's specific guide. Proper focus is crucial for optimal engraving and cutting results.

5. 운영

Operating the SCULPFUN S10 involves preparing your design, setting parameters, and initiating the engraving or cutting process.

5.1. 재료 준비

• Place the material securely on the working area. Use clamp움직임을 방지하기 위해 필요한 경우.
• Ensure the A4 steel pad is positioned underneath the material to protect the surface below.
• Verify the laser focus is correctly set for the material thickness.

5.2. 소프트웨어 운영

1. Open your chosen laser software (e.g., LightBurn, LaserGRBL).
2. Import or create your design.
3. Configure laser parameters (power, speed, passes) based on the material type and desired outcome. Refer to the software's material settings guide for recommended values.
4. 사전view the job to ensure correct placement and scale.
5. Initiate the engraving/cutting process. Monitor the machine closely during operation.

Figure 4: Illustration of the 10W optical power laser with air assist, demonstrating its cutting capabilities on 3mm and 6mm plywood in a single pass. The air assist helps in achieving cleaner cuts by removing residue.

Figure 5: Comparison showing the cleaner cutting edge and lack of smoke stains achieved by the SCULPFUN S10 with air assist, compared to other lasers without it.

5.3. Key Features for Operation

• High Density 10W Laser Power: The S10's 10W laser provides strong cutting penetration and engraving capabilities, allowing it to cut high-density woods like MDF and walnut more easily.
• Industrial-grade Engraving Accuracy: Equipped with a high-precision anti-shake linear X-axis slide rail, the S10 minimizes wave line marks, resulting in more accurate engravings.
• Powerful High-Speed Air Assist: The advanced fluid mechanics design of the air assist nozzle can spray high-speed airflow up to 14.5m/s, significantly improving cutting efficiency and quality when connected to a compatible air compressor (30L/min 0.03Mpa recommended, purchased separately).

6. 유지관리

정기적인 유지관리는 레이저 조각기의 수명과 최적의 성능을 보장합니다.

• 레이저 렌즈 청소: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam clarity and power.
• 움직이는 부품에 윤활유를 바르세요: Apply a small amount of lubricant to the linear slide rails and belts as recommended in the detailed product manual to ensure smooth movement.
• 느슨한 연결을 확인하세요: Regularly inspect all electrical and mechanical connections to ensure they are secure.
• 잔해물 청소: Remove any accumulated dust, debris, or material scraps from the machine's working area and internal components.

7. 문제 해결

일반적인 문제와 잠재적 해결책:

8. 사양

9. 보증 및 지원

SCULPFUN provides a 12개월 보증 for the S10 Laser Engraver. For any questions, technical assistance, or warranty claims, please contact SCULPFUN customer support directly. Refer to the contact information provided in your product packaging or on the official SCULPFUN web대지.

For detailed machine instructions and parameter settings, always refer to the comprehensive manual provided with your product.