소개
Thank you for choosing the Displays2go Motorized Rolling TV Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and use.
중요한 안전 정보
- 모든 지침을 읽으십시오. Ensure you understand all assembly and operation instructions before use.
- 중량 용량: 최대 중량 용량은 265파운드(120kg)를 초과하지 마십시오.
- 화면 크기: This stand is designed for screens between 43" and 100".
- 전원: Connect the stand to a grounded power outlet (110V-250V).
- 케이블 관리 : Ensure all cables are properly routed and secured to prevent tripping hazards or damage during movement.
- 캐스터 잠금 장치: Always engage the caster locks when the stand is in a stationary position to prevent accidental movement.
- 어린이와 애완동물: Keep children and pets away from the stand during operation to prevent injury.
- 유지: Do not attempt to service the motorized components yourself. Refer to qualified service personnel.
설정 및 조립
Carefully unpack all components and verify against the parts list (not provided in this document, refer to packaging). Assembly typically involves attaching the base, column, and TV mounting brackets.
1. 베이스 어셈블리
Attach the four heavy-duty casters to the base frame. Ensure they are securely fastened. Two casters are lockable; position them for easy access.
2. Column Installation
Mount the motorized column onto the assembled base. Follow the specific instructions provided with your hardware kit to ensure proper alignment and secure attachment.
3. TV Mounting Bracket Attachment
Attach the VESA-compatible mounting brackets to the back of your television. Refer to your TV's manual for appropriate screw sizes and mounting points. The stand supports VESA sizes up to 800x600.
Image: The TV stand's mounting brackets are visible, ready for television attachment. This image shows the stand without a TV, highlighting the VESA mounting plate and the motorized column.
4. TV 설치
Carefully lift your television and hook the attached brackets onto the stand's mounting plate. Secure the TV using the provided safety screws or clips. Ensure the TV is level and stable.
Image: The motorized TV stand with a large television securely mounted in a vertical view위치입니다.
5. 전원 연결
Connect the power cord to the stand and then to a suitable electrical outlet. The power cord length is 64 inches.
작동 지침
The Displays2go Motorized Rolling TV Stand features remote-controlled height adjustment and tilt functionality.
원격 제어 기능
- 위/아래 버튼: Use these buttons to raise or lower the television screen. The height can be adjusted from 36" to 62".
- Tilt Buttons: Use these buttons to adjust the viewing angle of the screen, from a vertical position (0°) down to a horizontal table position (90°).
높이 조정
Press the "Up" or "Down" buttons on the remote control to move the screen to your desired height. The motorized mechanism will smoothly adjust the display.
Image: Illustration demonstrating the adjustable height feature of the TV stand, showing the screen at different vertical positions.
기울기 조정
Press the "Tilt Up" or "Tilt Down" buttons on the remote control to change the screen's angle. This allows for conversion from a vertical display to an interactive horizontal table.
Image: Illustration demonstrating the adjustable tilt feature, showing the screen transitioning from vertical to a horizontal table-like orientation.
Image: The TV stand with a television fully tilted to a horizontal position, suitable for interactive table use.
유동성
To move the stand, unlock the two lockable casters. Carefully push the stand to its new location. Once positioned, engage the caster locks to stabilize the stand.
제품 비디오
Video: This video demonstrates the motorized lift and tilt capabilities of the Displays2go Motorized Rolling TV Stand, showcasing its versatility in adjusting screen height and angle.
유지
- 청소: 스탠드를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 검사: Periodically check all fasteners and connections to ensure they are tight and secure.
- Motorized Components: The motorized system is designed for long-term use and generally requires no user maintenance. Do not lubricate or disassemble.
- 캐스터 : 바퀴가 원활하게 굴러가도록 바퀴에 이물질이 없도록 하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Stand does not move (lift/tilt) |
|
|
| Stand moves unevenly or makes unusual noises |
|
|
| 바퀴가 부드럽게 굴러가지 않습니다 |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 디스플레이2고 |
| 모델 | DGMLTSBK |
| Overall Width x Depth | 37.5인치 x 30.0인치 |
| Height Range (Min. x Max) | 36.0인치 x 62.0인치 |
| 무게 | 제품 무게 175.0파운드, 배송 무게 219파운드 |
| 재료 | 강철, 합금강 |
| 마치다 | 파우더 코팅 |
| 배치 유형 | 플로어 스탠딩 |
| 정위 | 풍경 |
| 특징 | Motorized, Wheels, Tilting, Adjustable Height, Remote Controlled |
| 색상 | 검은색 |
| 전원 코드 길이 | 64.0인치 |
| 왓tage | 260와트 |
| 장착 브래킷 너비 | 15.8" (with extenders: 35.5") |
| VESA 크기 | Up to 800x600 |
| Min Monitor Size | 43인치 |
| 최대 모니터 크기 | 100인치 |
| 브래킷 유형 | 기울이기 |
| Max Monitor Weight | 265.0파운드 |
| View잉 각도 | 0° - 90° |
| 입력 Voltage | 110V-250V |
| 전력 출력 | 24V |
보증 및 지원
보증 정보
This product is typically covered by a manufacturer's warranty. Please refer to your purchase documentation or contact Displays2go directly for specific warranty terms and conditions. A 30-day return policy is generally offered for this product.
고객 지원
For technical assistance, missing parts, or any questions regarding your Displays2go Motorized Rolling TV Stand, please contact Displays2go customer support. Contact information can typically be found on the Displays2go web사이트 또는 구매 송장.
