소개
The WALI GSMU001-W Ultrawide Monitor Arm is designed to provide an ergonomic and space-saving solution for mounting your monitor. This gas spring arm supports screens from 13 to 49 inches, weighing up to 33 lbs, and features VESA 75x75mm and 100x100mm compatibility. It also includes two integrated USB 3.0 ports for convenient connectivity, helping to optimize your workspace.
안전 정보
- 조립 및 사용 전에 모든 지침을 주의 깊게 읽으십시오. 그렇지 않을 경우 부상이나 제품 손상이 발생할 수 있습니다.
- Do not exceed the maximum weight capacity of 33 lbs (15 kg). This product is intended for monitors within the specified weight range.
- Ensure the mounting surface (desk) is stable and capable of supporting the combined weight of the mount and the monitor.
- Keep small parts and packaging materials away from children, as they may pose a choking hazard.
- Use only the hardware provided with the product. Using incompatible hardware may cause instability and potential damage.
- If you have any questions or encounter issues during installation or operation, contact WALI customer support for assistance.
패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- WALI Single Monitor Gas Spring Desk Mount (GSMU001-W)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- 사용자 설명서
설정
Step 1: Choose Mounting Option (C-Clamp 또는 그로밋 베이스)
The monitor arm offers two installation methods to suit your desk type. Both options are compatible with desk thicknesses between 0.39 inches and 1.8 inches (10mm - 45mm).
For grommet mounting, your desk must have a cable grommet hole with a diameter of at least 2.4 inches (60mm).
Image: Installation Flexibility - C-clamp and grommet installation options.
Refer to the detailed instructions in the included user manual for specific steps on C-clamp or grommet base installation.
2단계: VESA 플레이트를 모니터에 부착합니다.
Secure the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the plate is firmly attached and aligned with your monitor's VESA mounting holes (75x75mm or 100x100mm).
Image: VESA plate attachment to the monitor.
3단계: 모니터를 암에 장착합니다.
Once the VESA plate is attached to your monitor, carefully lift the monitor and slide the VESA plate onto the monitor arm's mounting head. Secure it in place with the provided locking mechanism.
Image: Monitor mounted on the arm.
Step 4: Connect USB Cables (Optional)
The monitor arm base includes two easily accessible USB 3.0 ports. Connect the integrated USB cables from the arm to your computer's USB 3.0 ports to enable this functionality.
Image: High Speed 3.0 USB Port connection.
Video: WALI Single Monitor Stand Mount Arm (GSMU001-W)
Video: Official WALI video demonstrating the features and installation process for the GSMU001-W monitor arm.
운영
모니터 위치 조정
The WALI GSMU001-W monitor arm allows for flexible positioning to achieve optimal viewing angles and ergonomic comfort. You can adjust the monitor head for tilt, swivel, and rotation:
- 경사: Adjust the monitor +45° to -45° vertically.
- 받침: Rotate the monitor +90° to -90° horizontally.
- 회전: 모니터를 360° 회전하여 가로 또는 세로 방향으로 사용할 수 있습니다.
Image: Angle Adjustment capabilities of the monitor arm.
가스 스프링 장력 조정
The gas spring mechanism allows for smooth and stable height adjustments. If your monitor sags or is difficult to move, you may need to adjust the gas spring tension:
- To adjust for lighter monitors, turn the adjustment screw clockwise.
- To adjust for heavier monitors, 조정 나사를 시계 반대 방향으로 돌립니다.
Use the provided Allen wrench to make small adjustments until the arm holds your monitor securely in any position. Ensure the arm is kept in a horizontal level during adjustment.
Image: Gas Spring Tension Adjustment instructions.
유지
To ensure the longevity and optimal performance of your WALI monitor arm, follow these maintenance guidelines:
- 청소: Wipe the arm and base with a soft, damp 천으로 닦아주세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 가스 스프링: If the monitor arm's movement becomes stiff or loose over time, re-adjust the gas spring tension as described in the 'Operating' section.
문제 해결
모니터가 처지거나 제자리에 고정되지 않습니다.
해결책: The gas spring tension may be too low for your monitor's weight. Refer to the 'Gas Spring Tension Adjustment' section under 'Operating' and turn the adjustment screw counter-clockwise to increase tension until the monitor holds its position.
모니터를 위아래로 움직이기가 어렵습니다.
해결책: The gas spring tension may be too high. Refer to the 'Gas Spring Tension Adjustment' section under 'Operating' and turn the adjustment screw clockwise to decrease tension until the monitor moves smoothly.
USB 포트가 작동하지 않습니다
해결책: Ensure the USB cables from the monitor arm base are securely connected to the USB 3.0 ports on your computer. Check your computer's device manager to confirm USB drivers are installed correctly.
명세서
| 모델 번호 | GSMU001-W |
| 화면 크기 호환성 | 13 to 49 inches (flat or curved) |
| 중량 용량 | 최대 33kg(15파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 책상 두께(C-Cl)amp) | 0.39인치 - 1.8인치 (10mm - 45mm) |
| 책상 두께(그로밋) | 0.39" - 1.8" (10mm - 45mm), with 2.4" (60mm) diameter hole |
| 기울기 범위 | ±45° |
| 스위블 범위 | ±90° |
| 회전 | 360° |
| 최대 높이 | 21.7인치(55.1cm) |
| 최대 확장 | 20.2인치(51.3cm) |
| USB 포트 | 2개의 USB 3.0 |
| 재료 | 금속 |
Image: Display Compatibility overview.
Image: Product Dimension - Max Height and Extension.
Image: Product Dimension - Base measurements.
보증
WALI products are manufactured with quality and durability in mind. For specific warranty details regarding your GSMU001-W monitor arm, please refer to the warranty information provided with your purchase documentation or contact WALI customer support directly. WALI is committed to providing support for its products.
지원하다
For any questions, technical assistance, or support needs, please contact WALI customer service. Experienced and friendly US-based customer support is available to assist you 7 days a week.
Contact information can typically be found on the WALI official web사이트 또는 제품 포장에 표시되어 있습니다.