XPG 사이버코어 1300W 모듈형 파워서플라이 사용자 설명서

1. 서론

The XPG Cybercore 1300W Modular Power Supply is designed for high-performance computing, offering 80 Plus Platinum efficiency and robust power delivery. This manual provides essential information for the proper installation, operation, and maintenance of your power supply unit.

Figure 1: XPG Cybercore 1300W Modular Power Supply Unit.

2. 설정 및 설치

Proper installation is crucial for the optimal performance and longevity of your XPG Cybercore PSU. Follow these steps carefully.

2.1 언박싱 및 패키지 구성품

설치를 시작하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오.

Figure 2: Contents of the XPG Cybercore 1300W Power Supply package, including the PSU, modular cables, power cord, and documentation.

패키지에는 일반적으로 다음이 포함됩니다.

• XPG Cybercore 1300W Power Supply Unit
• Modular Cable Set (various PCIe, SATA, CPU, Motherboard cables)
• AC 전원 코드
• 장착 나사
• 빠른 시작 가이드 및 보증 정보

2.2 물리적 설치

1. PC 케이스를 준비하세요: Ensure your PC case is powered off and unplugged. Remove the side panel to access the PSU mounting area.
2. PSU를 장착하세요: Position the XPG Cybercore PSU in the designated power supply bay of your PC case. Secure it using the provided mounting screws.
3. 모듈형 케이블 연결: Identify the necessary cables for your motherboard, CPU, GPU, and storage devices. Connect them to the corresponding ports on the modular PSU.
   

   Figure 3: Diagram showing the modular cable connection ports on the XPG Cybercore Power Supply.
   • 마더보드: Connect the 24-pin ATX cable.
   • CPU: Connect the 8-pin (or 4+4-pin) EPS cable(s) to your motherboard.
   • GPU(PCIe): Connect the appropriate PCIe cables (e.g., 6+2 pin, 12VHPWR) to your graphics card. The XPG Cybercore 1300W supports ATX 3.0 and PCIe 5.0, including the 12VHPWR connector for modern GPUs.
   • Storage (SATA/Molex): Connect SATA power cables to SSDs/HDDs and Molex cables for other peripherals as needed.
4. 케이블 관리 : Route cables neatly behind the motherboard tray or through designated channels in your case to ensure optimal airflow and a clean build.
5. 최종 연결: Connect the other ends of the modular cables to your components. Double-check all connections to ensure they are secure.
6. AC 전원 연결: Plug the AC power cord into the PSU and then into a wall outlet.

3. 사용 설명서

The XPG Cybercore PSU is designed for efficient and quiet operation. Understand its features for optimal use.

3.1 전원 켜기/끄기

• 전원 켜기: After all connections are secure, flip the main power switch on the back of the PSU to the 'I' (On) position. Then, power on your computer via the case power button.
• 전원 끄기 : Shut down your computer through the operating system. Once the system is off, you can optionally flip the main power switch on the PSU to the 'O' (Off) position for complete power disconnection.

3.2 Intelligent Low-Noise Fan-Curve and ECO Mode

The XPG Cybercore PSU features an intelligent fan control system with an ECO mode for quiet operation.

Figure 4: Power Supply Fan Curve illustrating fan speed relative to load conditions, demonstrating quiet operation at lower loads.

• The fan is designed to operate silently at low loads, only increasing speed as power demand rises.
• If an ECO mode switch is present on your PSU, activating it will enable a Zero RPM Fan Mode, where the fan will not spin under low load conditions (typically below 30% load) for silent operation.

4. 유지관리

정기적인 유지보수는 전원 공급 장치의 수명 연장과 안정적인 성능을 보장하는 데 도움이 됩니다.

• 먼지 청소: Periodically clean dust from the PSU fan and ventilation grilles using compressed air. Ensure the PSU is powered off and unplugged before cleaning.
• 케이블 검사: Check all modular cable connections regularly to ensure they are firmly seated. Loose connections can lead to instability or component damage.
• 환경: Ensure the PC operates in a well-ventilated area to prevent overheating. Avoid placing the PC in enclosed spaces that restrict airflow.
• 열지 마: Do not attempt to open the power supply unit. It contains high voltage components and poses a risk of electric shock. Opening the unit will also void the warranty.

5. 문제 해결

If you encounter issues with your XPG Cybercore PSU, refer to these common troubleshooting steps.

• 전원 없음:
  • AC 전원 코드가 전원 공급 장치와 벽면 콘센트에 제대로 꽂혀 있는지 확인하십시오.
  • Verify the main power switch on the PSU is in the 'I' (On) position.
  • 벽면 콘센트에 다른 기기로 전원이 공급되는지 확인하십시오.
  • Ensure all modular cables (24-pin ATX, CPU, GPU) are correctly and firmly connected to both the PSU and the respective components.
• 시스템 불안정/충돌:
  • 시스템의 총 전력 소모량이 파워서플라이의 1300W 용량을 초과하지 않도록 하십시오.
  • 케이블 연결 상태를 확인하고, 특히 마더보드와 그래픽 카드에 연결된 케이블이 헐거워지지 않았는지 점검하십시오.
  • Monitor component temperatures to rule out overheating issues.
• 과도한 팬 소음:
  • If the ECO mode is enabled, the fan should remain off at low loads. If it's constantly spinning loudly at low loads, ensure the ECO mode is functioning correctly or disable it if preferred.
  • 팬과 통풍구에 쌓인 먼지를 청소하세요.
• Burning Smell/Smoke:
  • Immediately power off and unplug the system. Do not attempt to restart it.
  • Contact XPG customer support or a qualified technician.

6. 사양

Detailed technical specifications for the XPG Cybercore 1300W Modular Power Supply.

Figure 5: Detailed specifications table for XPG Cybercore 1300W and 1000W models.

7. 보증 정보

The XPG Cybercore 1300W Modular Power Supply comes with a 10년 보증, reflecting its high quality and durability. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the official XPG web사이트 또는 제품 포장에 포함된 보증 카드를 참조하세요.

8. 지원

For further assistance, technical support, or service inquiries, please contact XPG customer support through their official channels:

• 공식적인 Web대지: 방문하세요 XPG Official Web대지 제품 정보, FAQ, 지원 연락처 정보를 확인하세요.
• 고객 서비스: Refer to your product's quick start guide or the XPG web지역 고객 서비스 연락처 정보를 위한 사이트입니다.