1. 서론
Thank you for choosing the Evenflo Pivot Vizor Travel System. This comprehensive manual provides detailed instructions for the safe and effective use of your new stroller and LiteMax Infant Car Seat. Designed for versatility and convenience, this travel system adapts to your child's growth, offering multiple modes of use and innovative features like the integrated privacy shade.
조립 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
Image: The Evenflo Pivot Vizor Travel System, showcasing the stroller and the LiteMax Infant Car Seat.
2. 안전 정보
경고: 이러한 경고 및 지침을 따르지 않을 경우 심각한 부상이나 사망을 초래할 수 있습니다.
- 항상 하네스 시스템으로 아이를 안전하게 보호하세요.
- 유모차나 카시트에 아이를 절대 혼자 두지 마세요.
- The Evenflo LiteMax Infant Car Seat is designed for infants weighing from 4~35파운드.
- The stroller is designed for a child up to 55파운드.
- Ensure the stroller is fully locked and stable before placing a child in it.
- Avoid placing heavy bags on the handle, as this can cause the stroller to tip.
- This product meets JPMA safety standards.
3. 상자 안에 무엇이 들어있나요?
Your Evenflo Pivot Vizor Travel System package includes the following components:
- 1 유모차 프레임
- 1 Stroller Seat (convertible to carriage mode)
- 1 Evenflo LiteMax Infant Car Seat
- 1 Stay-in-Car Base for Infant Car Seat
- 1 Integrated Mesh Privacy Shade
- 1 Flex-Hold Cup Holder
4. 설치 및 조립
4.1 유모차 조립
- 유모차 프레임을 펼치세요: Release the folding latch and lift the handle until the frame locks into place. Ensure all locking mechanisms are engaged.
- 바퀴 부착: 앞바퀴와 뒷바퀴를 각각의 슬롯에 딸깍 소리가 나면서 단단히 고정될 때까지 삽입하십시오.
- 유모차 시트를 부착하세요: Align the stroller seat with the frame connectors and push down until it clicks into place. The seat can be attached facing forward or rearward.
- 컵홀더를 부착하세요: Secure the flex-hold cup holder to the designated attachment point on the stroller handle.
4.2 유아용 카시트 베이스 설치
The LiteMax Infant Car Seat base can be installed using your vehicle's LATCH system or the vehicle's seat belt.
- LATCH 설치: Locate your vehicle's lower anchor bars. Attach the LATCH connectors from the car seat base to the anchor bars. Press firmly on the base to remove slack from the LATCH straps until the base is secure and does not move more than one inch side-to-side or front-to-back at the belt path.
- 안전벨트 설치: Route the vehicle's lap and shoulder belt through the designated belt path on the car seat base. Buckle the seat belt and remove all slack by pressing firmly on the base while tightening the belt. Ensure the base is secure and does not move more than one inch.
4.3 Attaching the Privacy Shade
The unique mesh privacy shade is stored in a convenient bumper bar pouch and can be easily attached to either the toddler seat or infant car seat canopy.
- For Toddler Seat: Unzip the top portion of the shade from the bumper bar pouch and attach it to the toddler seat canopy using the integrated zippers.
- For Infant Car Seat: Pull the bottom portion of the shade from the pouch's zippered pocket and attach it to the infant car seat canopy using the integrated zippers. No tools are necessary for attachment.
Image: Demonstrating the easy attachment of the privacy shade to the stroller canopy.
5. 사용 설명서
5.1가지 사용 모드
The Evenflo Pivot Vizor Travel System offers 6 versatile modes to accommodate your child's needs from infancy through toddlerhood:
- Infant Car Seat on Stroller (Parent-Facing): Attach the LiteMax Infant Car Seat directly to the stroller frame, facing the parent.
- Infant Car Seat on Stroller (Forward-Facing): Attach the LiteMax Infant Car Seat directly to the stroller frame, facing away from the parent.
- Carriage Mode (Parent-Facing): The stroller seat converts into a flat carriage for newborns, facing the parent.
- Carriage Mode (Forward-Facing): The stroller seat converts into a flat carriage for newborns, facing away from the parent.
- Toddler Seat Mode (Parent-Facing): The stroller seat in an upright position, facing the parent.
- Toddler Seat Mode (Forward-Facing): The stroller seat in an upright position, facing away from the parent.
Image: Visual representation of the six versatile modes of the travel system.
5.2 유모차 특징
- Reversible Modular Frame: Easily switch the direction of the stroller seat or car seat to have your child face you or the world.
- 부드러운 기동성: Equipped with large cruiser tires, front-wheel swivel, and rear-wheel suspension for a comfortable ride and easy navigation.
- 슬리퍼를 신고도 편하게 사용할 수 있는 브레이크: A convenient foot-activated brake system keeps the stroller stationary when needed.
- Oversized Peek-a-Boo Window: Monitor your child without disturbing them through the canopy's clear window.
- 대형 수납 바구니: A large basket beneath the seat provides amp필수품을 위한 공간.
- Flex-Hold Cup Holder: Securely holds beverages for the parent.
- Rider Board Compatibility: The stroller accepts the Evenflo Rider Board (sold separately) for an additional passenger.
Image: The stroller seat in reversible carriage mode, illustrating parent-facing and forward-facing options.
5.3 Car Seat Usage
The Evenflo LiteMax Infant Car Seat seamlessly transitions from your car to the stroller frame, providing continuous comfort and safety for your infant.
- Ensure the car seat is securely clicked into the stroller frame before use.
- Always use the 5-point harness system to secure your infant in the car seat.
- When transferring the car seat from the vehicle to the stroller, ensure the car seat handle is in the correct position for carrying or stroller attachment as per the car seat manual.
Image: A parent pushing the stroller with the LiteMax Infant Car Seat attached, demonstrating the seamless transition from car to stroller.
6. 관리 및 유지 보수
Proper care and maintenance will extend the life of your Evenflo Pivot Vizor Travel System.
- 직물 청소: For minor spills and stains on cloth, vinyl, or plastic surfaces, clean with cold water and mild soap. Air dry.
- 탈착식 시트 패드: If your model has removable seat pads, machine wash them separately in cold water on a delicate cycle. DO NOT use chlorine bleach. Tumble dry for 10-15 minutes on low heat, then remove immediately. DO NOT iron or dry clean.
- 금속 및 플라스틱 부품: 부드러운 천으로 닦아주세요amp cloth and dry with a soft cloth. DO NOT use abrasive cleaners.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 유모차가 쉽게 접히거나 펴지지 않습니다. | Folding latch is stuck or frame is not aligned. | Ensure all components are clear of the folding mechanism. Apply gentle pressure and check for obstructions. Refer to assembly instructions for proper unfolding. |
| Car seat difficult to connect/disconnect from stroller. | Connectors are not aligned or debris is present. | Ensure the car seat is perfectly aligned with the stroller's attachment points. Press firmly until you hear a click. Check connectors for any debris and clean if necessary. |
| Wheels are not swiveling smoothly. | Debris in wheel mechanism or swivel lock engaged. | Clean any dirt or debris from the wheel axles and swivel mechanisms. Ensure the front wheel swivel locks are disengaged if you desire swivel functionality. |
| Brake is not engaging/disengaging properly. | Mechanism obstructed or worn. | Check for any obstructions around the brake pedal and wheel. If the issue persists, contact Evenflo customer support. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 이븐플로 |
| 모델 번호 | 54712427 |
| 색상 | Promenade Blue |
| 재료 | Polyester, Ethylene Vinyl Acetate, Mesh, Metal (Frame) |
| Stroller Maximum Weight | 55 파운드 |
| Car Seat Weight Capacity | 4 to 35 Pounds (Rear-Facing) |
| 연령대 (설명) | 유아 |
| 포함된 구성 요소 | 1 Stroller, 1 Car Seat |
| Installation Type (Car Seat) | 걸쇠 |
| 하네스 유형 | 5 포인트 |
| 품목 무게 | 24.9 파운드 |
| 품목 치수(L x W x H) | 35인치 길이 x 27.25인치 너비 x 42.5인치 높이 |
| 접었을 때 크기 (가로 x 세로 x 높이) | 폭 27.25인치 x 깊이 21.5인치 x 높이 28.8인치 |
| 앞바퀴 지름 | 7 인치 |
| 뒷바퀴 직경 | 9 인치 |
| 컵 홀더의 수 | 1 |
| 유모차 브레이크 시스템 | 예 |
9. 보증 및 지원
9.1 제조업체 보증
The Evenflo Pivot Vizor Travel System comes with a 90일 한정 보증 제조사에서 제공하는 보증입니다. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
9.2 고객 지원
For further assistance, replacement parts, or to inquire about warranty service, please visit the official Evenflo website or contact their customer service department. Contact information can typically be found on the Evenflo web사이트 또는 제품 포장에 표시되어 있습니다.
이븐플로 공식 Web대지: www.evenflo.com
