1. 서론
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.
The SENIX 4QL Tiller Cultivator is designed for preparing soil for planting, weeding, and general garden maintenance. It features a 46cc 4-cycle engine, offering a 15-inch tilling width and an 8-inch tilling depth.
2. 안전 정보
경고: Operating gasoline engine equipment can expose you to chemicals including engine exhaust, carbon monoxide, and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear, when operating the tiller.
- Keep hands, feet, and clothing away from rotating tines.
- 작업 구역에 구경꾼, 어린이, 애완동물이 없는지 확인하십시오.
- Never operate the tiller in an enclosed space due to the risk of carbon monoxide poisoning.
- Before performing any maintenance or clearing obstructions, always turn off the engine and ensure all moving parts have stopped.
- Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area, away from ignition sources.
3. 조립
The SENIX 4QL Tiller Cultivator requires minimal assembly. Typically, this involves attaching the handles and ensuring all components are securely fastened. Refer to the included assembly diagram for detailed steps.
- 핸들 어셈블리: Attach the foldable handles to the main unit using the provided hardware. Ensure they are locked into the operating position before use.
- 휠 조정: The wheels can be adjusted. Drop the wheels when not in use for storage or transport, and raise them when tilling.
Figure 3.1: Adjustable wheels for transport and tilling.
4. 설정
4.1 연료 공급
The SENIX 4QL Tiller Cultivator is equipped with a 4-cycle engine. This means there is no need to mix gas and oil. Use fresh, unleaded gasoline with an octane rating of 87 or higher. The fuel tank capacity is 0.8 liters.
- 연료를 보충하기 전에 엔진이 꺼져 있고 식었는지 확인하십시오.
- Refuel in a well-ventilated outdoor area.
- 연료 탱크를 과도하게 채우지 마십시오. 연료가 팽창할 공간을 남겨두십시오.
4.2 엔진 오일
The tiller includes engine oil. Before first use, ensure the engine oil level is correct. The oil tank capacity is 0.1 liters. Refer to the engine manual for specific oil type and checking procedures.
Figure 4.1: Engine view with fuel and oil components.
5. 사용 설명서
5.1 엔진 시동
The SENIX 4QL Tiller features an auto choke and compression release for easy starting.
- 연료 탱크가 가득 차 있는지, 오일 레벨이 적절한지 확인하십시오.
- Move the choke lever to the 'START' position (if applicable, some models have auto-choke).
- 연료가 보일 때까지 프라이머 벌브를 여러 번 누릅니다.
- 엔진이 시동될 때까지 시동줄을 단단하고 부드럽게 당기십시오.
- 엔진이 시동되면 초크 레버를 점차 'RUN' 위치로 옮기세요.
5.2 경작
The tiller is equipped with 6 premium steel forward rotating tines, offering a 15-inch tilling width and 8-inch tilling depth.
- Ensure the adjustable wheels are in the raised position for tilling.
- 양손으로 손잡이를 단단히 잡습니다.
- Engage the throttle to begin tilling.
- Guide the tiller slowly and steadily through the soil. Do not force the machine.
- The tiller is suitable for various terrains including dry ground, hard soil, muddy ground, and weedy ground.
Figure 5.1: Tilling width and depth capabilities.
Figure 5.2: Tiller suitability for various soil types.
5.3 엔진 정지
To stop the engine, release the throttle and move the engine switch to the 'OFF' position.
6. 유지관리
정기적인 유지관리는 쟁기의 수명과 최적의 성능을 보장합니다.
- 청결: After each use, clean the tiller, especially the tines, to remove soil, debris, and plant matter.
- 타인 검사: Periodically check the tines for wear, damage, or obstructions. Remove any wrapped material like wire or roots.
- 탈착식 블레이드: The tiller features a removable blade for convenient cleaning and maintenance. Refer to the manual for instructions on safe removal and reinstallation.
- 오일 교환: Follow the manufacturer's recommendations for regular engine oil changes.
- 에어 필터: Inspect and clean or replace the air filter as needed to ensure proper engine performance.
Figure 6.1: Removable blade for convenient cleaning.
7. 문제 해결
If you encounter issues with your tiller, consult the following common troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 엔진이 시동되지 않습니다 | No fuel, incorrect choke position, fouled spark plug, old fuel. | Check fuel level, adjust choke, clean/replace spark plug, use fresh fuel. |
| 작동 중 전원 손실 | Clogged air filter, low oil level, tines obstructed. | Clean air filter, check/add oil, clear tines. |
| 과도한 진동 | Loose components, bent tines, debris wrapped around shaft. | Inspect and tighten all fasteners, check tines for damage, clear debris. |
If problems persist after attempting these solutions, please contact SENIX customer service.
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 세닉스 |
| 모델 번호 | TL4QL-L1 |
| 엔진 유형 | 4-Cycle Gas Powered, Full Crank |
| 엔진 배기량 | 46cc |
| 경작 폭 | 15인치 |
| 경작 깊이 | 8인치 |
| 연료 탱크 용량 | 0.8리터 |
| 오일 탱크 용량 | 0.1리터 |
| 품목 무게 | 31.7 파운드 |
| 제품 치수 | 8인치 깊이 x 15인치 너비 x 37.8인치 높이 |
| 시작 방법 | Hand-pull (Easy Start with Auto Choke and Compression Release) |
9. 보증 및 지원
The SENIX 4QL Gas Powered Tiller Cultivator is backed by a 3년 한정 보증. For warranty claims, technical assistance, or to order replacement parts, please contact SENIX customer service.
For further information and support, you may visit the official SENIX web자세한 내용은 해당 사이트를 참조하거나 제품 포장에 제공된 연락처 정보를 참조하세요.
10. 제품 오버view 동영상
비디오 10.1: 오버view of the SENIX Gas 4QL product line, highlighting key features and benefits.
