1. 소개 및 이상view
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your TOPENS AT12131 Single Swing Gate Opener. Please read all warnings, precautions, and instructions carefully before installation and use to ensure safe and efficient operation.
The TOPENS AT12131 is a heavy-duty automatic gate motor designed for single swing gates up to 880 lbs (400 kg) in weight or 18 ft (5.5 m) in length. It offers flexible power modes, including direct AC power, battery backup, and solar compatibility. Key features include advanced security coding for remotes, reliable electromagnetism limit switches, safety stop-and-reverse, auto-close functionality, and soft start/stop for motor protection.
2. 안전 정보
WARNING: Improper installation or use can lead to serious injury or death. Always follow safety guidelines.
- Ensure the gate operates smoothly by hand before installing the opener.
- Keep hands and clothing clear of the gate and opener during operation.
- Do not allow children to play near the gate or gate opener.
- 정기적으로 대문과 개폐 장치를 점검하여 마모나 손상 흔적이 있는지 확인하십시오.
- Utilize the manual release key in case of power outage or remote loss.
3. 패키지 내용
The TOPENS AT12131 Single Swing Gate Opener package includes the following components:
- 1x Gate Opener Arm
- 1x 제어 상자
- 1x UPS01 Uninterrupted Power Supply
- 2x M12 Remote Controls
- 1x Post Bracket
- 1x Pull-to-Open Bracket
- 장착 하드웨어(볼트, 너트, 와셔, 핀)
- 1x Manual Release Key
- 사용 설명서
4. 설치
The installation process may vary depending on your gate's condition. The following steps provide a general reference.
4.1 Pre-Installation Gate Check
Before installing the gate opener, ensure your gate can open and close smoothly and freely by hand without any gate opener attached. This confirms proper gate hinge function and alignment.
4.2 Assemble Mounting Brackets
Assemble the post bracket and the pull-to-open bracket using the provided bolt, washers, and nut. Ensure all components are securely fastened.
4.3 Determine Arm Position on the Gate
Refer to the instruction manual's diagrams and tables to determine the proper mounting position for the post bracket. The tables provide maximum opening angles based on distances 'A' (distance from hinge to post pivot) and 'B' (distance from hinge to post bracket). Measure these distances on your gate to find the optimal installation location.
4.4 Attach the Bracket to the Arm
Securely attach the assembled bracket to the gate opener arm using the provided pin and cotter pin. Ensure a snug fit for stable operation.
4.5 Release the Clutch and Test
Use the manual release key to disengage the clutch. Manually extend and retract the arm to ensure smooth movement. This step is crucial for proper installation and function.
4.6 Fix the Post Bracket
Securely fix the post bracket to the gate post using appropriate bolts. Ensure the bracket is level and aligned with the gate opener arm's intended path.
4.7 Fix the Arm to the Gate
Attach the gate opener arm to the gate bracket. Use a level to ensure the arm is horizontal when the gate is in the desired open position. Drill and tap holes as needed for secure fastening.
4.8 Install the Control Box and UPS01
Mount the control box and the UPS01 Uninterrupted Power Supply securely. Ensure they are protected from environmental elements and easily accessible for wiring.
5. Connection of the Power Supply
The TOPENS AT12131 offers flexible power options. Choose the mode that best suits your needs.
5.1 Power Mode 1: Use AC Electricity Only
Connect the 5-conductor cable from the opener arm to the control board. Then, connect the UPS01 Uninterrupted Power Supply to the control board and plug the power cord into a 100-240VAC electricity socket. The UPS01 will power the system directly.
5.2 Power Mode 2: AC Electricity and Backup Batteries
For backup power, connect two 12V 12Ah automotive/marine type batteries (not included) in series to become 24V. Connect the UPS01 to the control board, then connect the UPS01 to the battery terminals. Finally, connect the AC power cord to the UPS01. The UPS01 will charge the batteries and provide power, switching to battery power during AC outag에스.
5.3 Power Mode 3: Solar Panels and Batteries
If AC electricity is unavailable, you can power the system using solar panels and batteries. Connect the solar panels (not included) in parallel to increase charge current. Connect the UPS01 to the control board, then connect the UPS01 to the battery terminals. Finally, connect the solar panels to the UPS01. The UPS01 will manage solar charging.
5.4 Power Mode 4: AC Electricity, Solar Panels, and Backup Batteries
This mode combines all power sources for maximum reliability. Connect the UPS01 to the control board, then connect the UPS01 to the battery terminals. Connect the solar panels to the UPS01, and finally, connect the AC power cord. The system prioritizes AC power, switching to solar/battery during outag에스.
6. 운영
6.1 Program the Remote Control
To program a remote control, press the learn button (CODE SW button) on the control board. The CODE LED will light up. Then, press the desired button on your remote control twice, holding it for a moment between presses. The CODE LED will flash and then turn off, indicating successful programming.
6.2 Adjust the Limit Switch
The position of Limit Switch A is factory-fixed and should not be adjusted. Limit Switch B controls the gate's closed position. If the gate does not stop at the desired closed position, re-adjust Limit Switch B. Test the gate's operation after adjustment to ensure proper function.
6.3 Setting of the Control Board
Adjust the DIP switches and potentiometers on the control board according to the detailed instructions in the full user manual. These settings control parameters such as force, auto-close time, and soft stop duration.
7. Connection of Accessories
The TOPENS AT12131 supports various accessories to enhance functionality and security. Refer to the full user manual for detailed wiring diagrams and setup instructions for each accessory.
7.1 TC147 Wall Push Button
Connect the TC147 Wall Push Button to the control board for manual gate operation. The cable for this accessory is not included.
7.2 TC148 Waterproof Wall Push Button
Connect the TC148 Waterproof Wall Push Button to the control board for manual gate operation in outdoor environments. The cable for this accessory is not included.
7.3 JD24VY Warning Light
Connect the JD24VY Warning Light to the control board. This light will flash during gate operation to provide a visual warning. The cable for this accessory is not included.
7.4 TC102 Photo Eye Beam Sensor
Install the TC102 Photo Eye Beam Sensor to enhance safety. This sensor detects obstructions in the gate's path, preventing it from closing on people or objects. Ensure the cables are protected in PVC conduit and buried underground. The cables for this accessory are not included.
7.5 TRF3 Reflection Photocell Sensor
The TRF3 Reflection Photocell Sensor provides an alternative safety mechanism. Connect it to the control board and enable its function via DIP Switch #3. The cable for this accessory is not included.
7.6 ERM12 External Receiver
Connect the ERM12 External Receiver to the control board to extend the range or compatibility with additional remote controls. Program the remote with the receiver.
7.7 TC175P Wired Keypad
Connect the TC175P Wired Keypad to the control board for secure access using a password. Set a common access password for operation.
7.8 TEW3 Vehicle Sensor Exit Wand
Install the TEW3 Vehicle Sensor Exit Wand to allow vehicles to exit automatically. Bury the wand away from power lines and the gate, adjusting sensitivity as needed. The cables for this accessory are not included.
7.9 TKP3 Wireless Keypad
Program the TKP3 Wireless Keypad for convenient wireless access. Use the learn button on the control board to pair the keypad and set your desired password.
7.10 TC186-R WiFi Smartphone Remote Control with Camera
For advanced control and monitoring, set up the TC186-R WiFi Smartphone Remote Control with Camera. Ensure your home's WiFi is on 2.4GHz mode (5GHz is not supported). Download the Linkcraft APP, register an account, and follow the in-app instructions to bind the device and connect to your home WiFi.
7.11 ET24 Electric Gate Lock
Install the ET24 Electric Gate Lock for added security. Before installation, check that the lock tongue operates smoothly. Determine the appropriate position for the lock receiver and fix it with screws or by welding. Remember to release the clutch before testing the lock.
8. 유지관리
Regular maintenance ensures the longevity and optimal performance of your gate opener. Perform the following checks periodically:
- 매끄럽게 하기: Lubricate moving parts of the gate and opener arm every 6 months or as needed.
- 연결 확인: Inspect all electrical connections and wiring for wear, corrosion, or looseness.
- 게이트 이동: Manually check the gate's movement to ensure it remains free of obstructions and operates smoothly.
- 안전 기능: Test safety features like the photo eye sensors and auto-reverse function regularly.
- 원격 제어 배터리: Replace remote control batteries as needed.
9. 문제 해결
If you encounter issues with your TOPENS AT12131 gate opener, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 문이 열리지 않거나 닫히지 않습니다 | No power, remote not programmed, obstruction, limit switch issue. | Check power supply, reprogram remote, clear obstructions, adjust limit switches. |
| 게이트가 예기치 않게 멈춤 | Obstruction detected, force setting too low, power fluctuation. | Clear obstructions, increase force setting on control board, check power stability. |
| 리모컨이 작동하지 않습니다 | Dead battery, out of range, not programmed. | Replace battery, move closer to receiver, reprogram remote. |
| 문이 부분적으로 열립니다 | Limit switch misadjusted, mechanical binding. | Adjust limit switch, check for physical obstructions or gate hinge issues. |
10. 사양
| 사양 | 값 |
|---|---|
| 제조업체 | 토펜스 |
| 부품 번호 | AT12131 |
| 품목 무게 | 26.3파운드 |
| 제품 치수 | 32.64 x 4.88 x 8.19 인치 |
| 품목 모델 번호 | AT12131 |
| 필요한 배터리 | Yes (6 CR2 batteries included for remotes) |
| 배터리 셀 유형 | 리튬 금속 |
| Gate Capacity (Max) | 880 lbs (400 kg) or 18 ft (5.5 m) |
11. 보증 및 지원
TOPENS provides a 12-month warranty for this product. For any questions, technical assistance, or warranty claims, please contact TOPENS customer support. You can find additional resources, including user manuals and installation videos, on the official TOPENS web대지.
We understand that each gate installation can be unique. If you have specific questions or require customized service, TOPENS specialists are available to provide professional and timely solutions.
