TJOY 100 ft RGB LED Strip Lights with 44-Key Remote Control User Manual

소개

Thank you for choosing the TJOY 100 ft RGB LED Strip Lights. This product is designed to provide vibrant, customizable lighting for indoor spaces, enhancing the ambiance of bedrooms, living rooms, kitchens, and more. This manual provides essential information for safe installation, operation, and maintenance of your LED strip lights.

Image: TJOY LED strip lights illuminating a modern kitchen with purple and blue light, creating a vibrant atmosphere.

안전 정보

이 제품은 다음을 위해 설계되었습니다. 실내에서만 사용 가능물이나 높은 습도에 노출시키지 마십시오.
Ensure the installation surface is clean, dry, and smooth for proper adhesion.
Operate the lights using the provided 24V power adapter. Using an incorrect power supply may damage the product or pose a safety risk.
Avoid short circuits by keeping metal objects and liquids away from exposed electrical components.
LED 스트립을 열 방출을 방해할 수 있는 재료로 덮지 마십시오.
어린이의 손이 닿지 않는 곳에 보관하세요.
If any damage occurs to the strip lights or power adapter, discontinue use immediately and contact customer support.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

2 x 50 ft RGB LED Strip Lights (Total 100 ft)
44키 적외선 리모컨 1개
1 x IR 수신기
1 x 24V 전원 어댑터
1 x 사용자 설명서

설정 및 설치

조명 테스트: Before installation, connect all components (LED strips, IR receiver, power adapter) and power on the lights to ensure they function correctly.
표면 준비: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or debris. The adhesive works best on glass and ceramic tile. Avoid frosted glass or dusty walls.
Image: Diagram illustrating suitable surfaces (glass, ceramic tile) and unsuitable surfaces (frosted glass, dusty wall) for LED strip light installation.
Apply the Strip Lights: Peel off the backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring it adheres firmly. Press repeatedly along the strip to secure it.
구성 요소 연결:
- Connect the LED strip(s) to the IR receiver. Ensure the arrows on the connectors align with the "+12V" markings.
- IR 수신기를 전원 어댑터에 연결합니다.
- 전원 어댑터를 표준 전기 콘센트에 연결하십시오.
Image: Diagram illustrating the correct connection sequence for the LED strip lights, IR receiver, and power adapter, highlighting arrow alignment.
절단 및 연결: The LED strips can be cut along designated cutting marks to adjust their length. If you need to link cut sections, specific 4-pin connectors (not included) are required.

작동 지침

Using the 44-Key IR Remote Control

The included 44-key IR remote control allows you to manage various functions of your LED strip lights. Ensure you point the remote directly at the IR receiver for optimal response.

Diagram of the 44-key IR remote control with labels for each button function

Image: Detailed diagram of the 44-key IR remote control, showing buttons for brightness, color selection, DIY functions, and dynamic modes.

전원 켜기/끄기: Use the red power button to turn the lights on or off.
밝기 조정: 사용하세요 밝기 업 그리고 밝기 낮추기 buttons to adjust the light intensity (8 levels available).
색상 선택: Choose from 20 preset colors using the color grid buttons.
DIY 색상 옵션: The 6 DIY buttons allow you to create and save custom colors. Press a DIY button, then use the R/G/B increase/decrease buttons to mix your desired color. Press the same DIY button again to save.
동적 모드:
- Quick/Slow: 다이내믹 모드의 속도를 조절하세요.
- 자동: 모든 동적 모드를 순환합니다.
- 플래시: Flashing mode.
- Fade 3/7: Gradual color change modes.
- Jump 3/7: Instant color change modes.

중요한: For the remote control to function, point it directly at the IR receiver, not at the LED strip itself.

Diagram showing correct and incorrect ways to point the remote control at the IR receiver

Image: Illustration demonstrating the correct method of pointing the remote control towards the IR receiver (green checkmark) versus pointing it at the LED strip (red X).

제품 비디오

비디오: 짧은 데모 쇼asing the TJOY LED Strip Lights changing colors and illuminating a room, highlighting their ambient effect.

유지

청소: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners.
저장: 장기간 조명을 보관할 경우, 손상을 방지하기 위해 깨끗하고 건조한 상태로 느슨하게 감아서 보관하십시오.
부착: If the adhesive weakens over time, additional mounting clips or double-sided tape may be used (not included).

문제 해결

문제	가능한 원인	해결책
표시등이 켜지지 않습니다.	전원 어댑터가 연결되어 있지 않습니다. 연결이 느슨함. IR remote battery depleted. IR remote not pointed at receiver.	전원 어댑터가 콘센트에 제대로 꽂혀 있는지 확인하십시오. Check all connections between the strip, receiver, and adapter. 리모컨 배터리(CR2025, 별도 구매)를 교체하세요. 리모컨을 적외선 수신기에 직접 향하게 하세요.
리모컨이 반응하지 않습니다.	리모컨과 수신기 사이에 장애물이 있습니다. 리모컨 배터리가 방전되었습니다. Remote too far from receiver.	모든 장애물을 제거하세요. 리모콘 배터리를 교체하십시오. Move closer to the IR receiver.
조명이 어둡거나 깜빡입니다.	낮은 밝기 설정. 전원 공급 장치 문제.	Increase brightness using the remote. 전원 어댑터가 올바르게 작동하는지 확인하세요.
접착제가 잘 붙지 않아요.	표면이 깨끗하지 않거나 매끄럽지 않습니다. Dusty or textured wall.	표면을 깨끗이 청소하고 건조시킵니다. Use additional mounting clips or strong double-sided tape for textured surfaces.

명세서

특징	세부 사항
모델 번호	TALED0321
상표	조이
라이트 타입	RGB LED 스트립 조명
길이	100 ft (2 x 50 ft rolls)
색상 옵션	16 Million (via RGB mixing), 20 preset colors
제어 방법	44키 적외선 리모컨
권tage	24 볼트
전원	코드식 전기
실내/실외 사용	실내 전용
수명	최대 50,000시간
재료	금속, 비닐
한국어:	792288214902

보증 및 지원

TJOY is committed to providing high-quality products and customer satisfaction. If you encounter any questions or issues during the installation or operation of your LED strip lights, please contact our customer service team. We aim to resolve all inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official TJOY web대지.

TJOY TALED0321