1. 서론
Thank you for choosing the Avision AD345G Duplex Document Scanner. This manual provides essential information for setting up, operating, and maintaining your scanner to ensure optimal performance and longevity. Please read this manual thoroughly before using the device.
2. 안전 정보
To prevent damage to the scanner or injury to yourself or others, please observe the following safety precautions:
- 스캐너를 물이나 과도한 습기에 노출시키지 마십시오.
- 스캐너와 함께 제공된 전원 어댑터만 사용하십시오.
- 스캐너를 직접 분해하거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 스캐너를 안정적이고 평평한 표면에 놓으십시오.
- Keep the scanner away from direct sunlight and heat sources.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Avision AD345G Duplex Document Scanner
- 전원 어댑터 및 케이블
- USB 3.1 케이블
- 빠른 시작 가이드
- 소프트웨어 CD (또는 다운로드 안내)
4. 설정
4.1 물리적 설정
- Unpack the scanner and remove all protective packaging materials.
- Place the scanner on a flat, stable surface with adequate space for document feeding and output.
- 전원 어댑터를 스캐너의 전원 입력 단자에 연결한 다음 전원 콘센트에 꽂으십시오.
- Connect the USB 3.1 cable from the scanner to an available USB port on your computer.
Figure 4.1: Avision AD345G scanner with its paper input and output trays extended, ready for use.
4.2 소프트웨어 설치
Before using the scanner, you must install the necessary drivers and scanning software. Refer to the Quick Start Guide for detailed instructions or follow these general steps:
- Insert the provided Software CD into your computer's CD/DVD drive, or download the latest drivers and software (including ISIS, TWAIN drivers, AVScan X, and PaperPort) from the official Avision web대지.
- Follow the on-screen instructions to complete the installation. It is recommended to install all bundled software for full functionality.
- 설치 후 메시지가 나타나면 컴퓨터를 다시 시작하십시오.
5. 사용 설명서
5.1 문서 로딩
- Extend the input and output trays.
- 용지 가이드를 문서 너비에 맞게 조정하십시오.
- Place the documents face-down in the Automatic Document Feeder (ADF), ensuring they are neatly stacked and aligned. The ADF can hold up to 100 pages.
- For long documents (up to 600 cm), ensure proper support and guidance during scanning.
Figure 5.1: Avision AD345G scanner with documents loaded in the Automatic Document Feeder, ready for scanning.
5.2 스캔 수행
- 스캐너의 전원이 켜져 있는지 확인하세요.
- Open your preferred scanning application (e.g., AVScan X, PaperPort, or any application supporting TWAIN/ISIS drivers).
- Select the Avision AD345G as your scanner.
- Configure scan settings such as color mode (e.g., 48-bit color depth), resolution (up to 300 dpi optical), simplex/duplex scanning, and destination folder. The scanner supports duplex scanning at 60 ppm/120 ipm.
- Press the "Scan" button on the scanner or initiate the scan from the software.
- Review the scanned images and save them in your desired format.
5.3 제어판 버튼 사용
The scanner features a control panel with buttons for quick operations:
- 전원 버튼: 스캐너를 켜거나 끕니다.
- 스캔 버튼: Initiates a scan using the default or last-used settings.
- 취소 버튼 : Stops the current scanning operation.
- Icon Button: Allows selection of pre-configured scan profiles (e.g., Scan to PDF, Scan to Email).
그림 5.2: 클로즈업 view of the Avision AD345G scanner's control panel, showing the display and function buttons.
6. 유지관리
6.1 스캐너 청소
Regular cleaning ensures consistent scan quality and extends the life of your scanner:
- 외부: 부드러운 천으로 외부를 닦아주세요.amp보푸라기가 없는 천으로 닦아주세요. 연마성 세제나 용제는 사용하지 마세요.
- 유리 표면: Gently clean the scanner's glass surface with a soft cloth and a non-abrasive glass cleaner.
- 롤러: Periodically clean the paper feed rollers with a damp cloth to remove paper dust and residue.
Caution: Always disconnect the power cable before cleaning the scanner.
7. 문제 해결
If you encounter issues with your Avision AD345G scanner, refer to the table below for common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 컴퓨터에서 스캐너를 인식하지 못합니다. | USB 케이블이 헐거워졌거나, 드라이버가 설치되지 않았거나, 전원이 꺼져 있을 수 있습니다. | USB 연결을 확인하고, 스캐너 전원이 켜져 있는지 확인하고, 드라이버를 다시 설치하십시오. |
| Scanned images are blurry or dirty. | Dirty scanner glass or rollers, incorrect settings. | Clean the scanner glass and rollers. Adjust scan resolution and focus settings. |
| 종이 걸림. | Misaligned documents, too many pages, damaged paper. | Ensure documents are aligned and not creased. Do not overload the ADF. Remove jammed paper carefully. |
| Scanner not feeding documents. | Paper not loaded correctly, rollers worn. | Reload documents, ensure paper guides are set correctly. Contact support if rollers are worn. |
8. 사양
| 특징 | 설명 |
|---|---|
| 상표 | 비전 |
| 모델 번호 | FF-2010B |
| 연결 기술 | USB 3.1 |
| 스캐너 유형 | Document Scanner (Duplex, Mail Scanner, Insertion Scanner, Archiving Scanner, Receipt Scanner) |
| 광센서 기술 | CIS |
| 해결 | 300dpi (광학식) |
| 색상 깊이 | 48비트 |
| 스캐닝 속도 | 60ppm / 120ipm |
| 자동 문서 공급기(ADF) 용량 | 100장 |
| 시트 크기 | Up to 9.5 x 14 inches (approx. 24.1 x 35.6 cm) |
| 긴 문서 스캔 | 최대 600cm(236인치) |
9. 보증 및 지원
For warranty information, please refer to the documentation included with your purchase or visit the official Avision website. For technical support, driver downloads, and further assistance, please contact Avision customer service or visit their support portal.
메모: Information regarding spare parts availability and software updates is not explicitly provided in the product details. Please check the manufacturer's web최신 정보를 제공하는 사이트.
Return Policy: This product has a 30-day return/replacement policy as per the seller's terms.
