1. 서론
The Ahuja AI-22 is a compact and versatile 2x2 USB audio interface designed for recording, playback, and various audio applications. It provides high-quality audio conversion, allowing you to connect microphones, instruments, and other audio sources to your computer for professional-grade sound capture and monitoring. This manual provides essential information for setting up, operating, and maintaining your AI-22 audio interface.
그림 1.1: Ahuja AI-22 Audio Interface, highlighting its diverse applications including conferencing, e-teaching, podcasting, and music production.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인해 주세요. 품목이 누락되었거나 손상된 경우 판매점에 문의해 주세요.
그림 2.1: The AI-22 package includes the audio interface, a Micro USB to USB Type A cable, and four anti-skid base feet.
- Ahuja AI-22 Audio Interface
- Micro USB Cable (USB 2.0 to USB Type A)
- Anti-Skid Base Feet (4 pieces)
3. 제품 오버view
Familiarize yourself with the front panel controls and indicators of your AI-22 audio interface.
그림 3.1: 상세한 view of the Ahuja AI-22 front panel, illustrating all inputs, control knobs, and status indicators.
전면 패널 기능:
- MIC/LINE Inputs (L/R): Combo XLR/TRS jacks for connecting microphones or line-level sources.
- INST Inputs: 1/4-inch TS jacks for connecting high-impedance instruments like guitars or basses.
- CLIP 지표: Red LEDs that illuminate when the input signal is too high, indicating potential clipping. Adjust gain to prevent clipping.
- SIG Indicators: Green LEDs that illuminate when an input signal is present.
- 직접 모니터링 버튼: Engages direct monitoring, allowing you to hear your input signal directly from the interface with zero latency.
- 출력 손잡이: Controls the overall output level to your monitor speakers or headphones.
- +48V Indicator: Red LED indicating that +48V phantom power is active for condenser microphones.
- 전원 표시기: Green LED indicating the device is powered on.
- 헤드폰 출력: 1/4-inch TRS jack for connecting headphones.
4. 설정
4.1 시스템 요구 사항
- Operating System: Windows (compatible with most modern Windows versions).
- 사용 가능한 USB 포트가 있습니다.
- 개인용 컴퓨터.
4.2 Connecting the AI-22
- 컴퓨터에 연결: Use the provided Micro USB cable to connect the AI-22 to an available USB port on your computer. The POWER indicator on the front panel will illuminate.
- 드라이버 설치(필요한 경우): The AI-22 is typically a class-compliant USB audio device, meaning it should work with standard drivers built into your operating system. If your computer does not automatically recognize the device or if you experience issues, please visit the official Ahuja website for specific driver downloads or troubleshooting guides.
- 마이크/악기 연결:
- For microphones, connect via the XLR input of the MIC/LINE jacks. If using a condenser microphone, activate +48V phantom power (refer to Section 5.2).
- For line-level sources (e.g., mixer output), connect via the TRS input of the MIC/LINE jacks.
- For instruments (e.g., guitar, bass), connect via the INST jacks.
- 출력 장치 연결:
- For monitor speakers, connect from the rear panel outputs (not explicitly shown in images, but implied by 'OUTPUT' knob).
- For headphones, connect to the 1/4-inch TRS Headphone Output on the front panel.
5. 사용 설명서
5.1 입력 게인 조정
- Adjust the gain knob for each input (MIC/LINE, INST) until the SIG indicator lights up consistently during signal presence.
- Ensure the CLIP indicator does not light up, as this indicates signal distortion. If it does, reduce the gain.
5.2 팬텀 전원(+48V)
- If using a condenser microphone, press the +48V button to supply phantom power. The +48V indicator will illuminate.
- Do not activate +48V for dynamic microphones or ribbon microphones unless specifically required and supported by the microphone, as it can cause damage.
5.3 직접 모니터링
- Press the DIRECT MONITOR button to enable zero-latency monitoring of your input signals. This allows you to hear your performance without delay, which is crucial during recording.
- When direct monitoring is active, the input signal is routed directly to the outputs (headphones and main outputs) before being processed by the computer.
5.4 Output Level Control
- Use the OUTPUT knob to adjust the overall listening volume for your monitor speakers and headphones.
5.5 일반적인 사용 시나리오
그림 5.1: AI-22 configured for classroom teaching, enabling recording and playback of lectures via USB connection to a computer and output to an amp리퍼.
그림 5.2: AI-22 in a studio setup, connecting instruments and microphones to a computer for recording, with output to monitor speakers and headphones.
그림 5.3: AI-22 integrated into a video conferencing system, facilitating audio input from multiple microphones and output through an amp리퍼.
6. 유지관리
- 청소: 제품 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 연마성 세제, 용제 또는 왁스는 사용하지 마십시오.
- 저장: Store the AI-22 in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- 케이블 관리: Handle USB and audio cables carefully. Avoid sharp bends or excessive pulling to prevent damage.
- 통풍: Ensure the unit has adequate ventilation and is not covered during operation to prevent overheating.
7. 문제 해결
If you encounter issues with your AI-22, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power (POWER LED off) | USB cable not connected or faulty; computer USB port issue. | Ensure USB cable is securely connected to both the AI-22 and the computer. Try a different USB port or cable. |
| No input signal (SIG LED off) | Microphone/instrument not connected; gain too low; incorrect input selected in software. | Check cable connections. Increase input gain. Verify input selection in your recording software. |
| Distorted input signal (CLIP LED on) | 입력 게인이 너무 높습니다. | Reduce the input gain until the CLIP LED no longer illuminates. |
| 출력 사운드 없음 | Output volume too low; incorrect output device selected in computer settings; faulty cables/speakers/headphones. | Increase the OUTPUT knob. Check your computer's sound settings to ensure the AI-22 is selected as the output device. Test with different cables or output devices. |
| 모니터링 중 지연 시간 | Direct monitoring not enabled; software latency. | Press the DIRECT MONITOR button. Adjust buffer size settings in your recording software to reduce latency. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | AI-22 |
| 제품 크기(LxWxH) | 16 x 22 x 10 센티미터 |
| 품목 무게 | 500g |
| 채널 수 | 2 |
| 연결 기술 | USB (for computer connection), XLR/TRS (for inputs) |
| 호환 장치 | 개인용 컴퓨터 |
| 운영 체제 | 윈도우 |
| 제조업체 | 아후자 |
| 원산지 | 인도 |
9. 보증 및 지원
The warranty for the Ahuja AI-22 audio interface is provided as per manufacturer terms and conditions. For detailed warranty information, technical support, or service inquiries, please visit the official Ahuja web사이트 또는 고객 서비스 부서에 문의하십시오.
For the most up-to-date information and resources, please refer to the manufacturer's official web대지: www.ahujaradios.com
