소개
Thank you for choosing the SENSEA Extensible Shower Curtain Rod. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new shower rod. Please read these instructions carefully before use and retain them for future reference.
안전 정보
- Ensure the rod is securely installed between two stable surfaces.
- Do not hang excessive weight on the rod, as this may cause it to fall and result in injury or damage.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Regularly check the rod's stability to ensure it remains firmly in place.
패키지 내용
Your SENSEA Extensible Shower Curtain Rod package should contain:
- 1 x SENSEA Extensible Shower Curtain Rod (Black Aluminum)
Note: Shower curtain and hooks are not included.
설정 및 설치
The SENSEA extensible shower curtain rod is designed for quick and easy installation without the need for drilling or tools, thanks to its integrated spring mechanism. It adapts perfectly to your wall width without causing damage.
그림 1: The SENSEA shower curtain rod, illustrating its no-drill installation and adjustable length range of 1.20 meters to 2.20 meters.
- 공간 측정: Determine the desired width for your shower curtain rod. The rod is adjustable from 120 cm to 220 cm.
- Extend the Rod: Hold the rod with both hands. Twist one end of the rod to unlock the extension mechanism. Gently pull the rod to extend it slightly beyond the measured width of your installation area (approximately 2-3 cm longer).
- 막대 위치: Place one end of the rod against one wall at the desired height. Compress the rod slightly by pushing the other end against the opposite wall.
- 안전하게 고정: Once positioned, release the pressure. The internal spring mechanism will exert tension, holding the rod firmly between the two walls. Ensure the rod is level and stable.
- 최종 확인: Gently tug on the rod to confirm it is securely installed and will not slip.
그림 2: Detail of the rod's end cap, designed for secure, non-slip contact with wall surfaces.
작동 지침
Once the SENSEA shower curtain rod is securely installed, its operation is straightforward:
- Hang Your Curtain: Attach your shower curtain to the rod using appropriate shower curtain hooks or rings.
- Adjust Curtain Position: Slide the shower curtain along the rod as needed to open or close your shower area.
그림 3: A shower curtain properly hung on the rod, demonstrating typical use.
유지
To ensure the longevity and appearance of your SENSEA shower curtain rod, follow these simple maintenance guidelines:
- 청소: 낚싯대를 부드러운 천으로 정기적으로 닦아주세요.amp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- 점검: Periodically check the rod for any signs of wear or damage. Ensure the end caps are intact and the rod remains securely tensioned between the walls.
- 녹 방지: The aluminum construction is designed to resist rust, but wiping it dry after showering can help maintain its condition, especially in high-humidity environments.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Rod slips or falls down. | Insufficient tension; rod not extended enough; slippery wall surface. |
|
| Rod does not extend/retract smoothly. | Internal mechanism might be stiff or dirty. |
|
명세서
- 상표: Sensea
- 모델 번호: 3276000702214
- 유형: Extensible Shower Curtain Rod
- 재료: 알류미늄
- 색상: 검은색
- 조절 가능한 길이: 120cm ~ 220cm(47.2인치 ~ 86.6인치)
- 설치 유형: Wall-mounted (tension-based, no drilling required)
- 제품 크기(길이 x 너비 x 높이): Approximately 130 x 10 x 6 cm (collapsed); 200 grams
지원 및 보증
SENSEA products are designed for reliability and to meet your needs. For any questions or assistance regarding your shower curtain rod, please refer to the retailer where you purchased the product or visit the official SENSEA web고객 지원 정보 사이트입니다.
예비 부품의 가용성에 대한 정보는 제공되지 않습니다.
