1. 소개 및 이상view
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.
The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.
Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
2. 안전 정보
WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- 이 히터를 설치하거나 사용하기 전에 모든 지침을 읽으세요.
- 설치 또는 유지보수 전에 반드시 주 회로 차단기에서 전원을 차단하십시오.
- Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
- Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
- 이 히터는 실내에서만 사용하도록 설계되었습니다.
- Keep the top air discharge grille clear of obstructions to ensure proper airflow.
3. 패키지 내용
패키지를 열 때 모든 구성 요소가 들어 있고 손상되지 않았는지 확인하세요.
- Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
- Concealed Mounting Bracket
- Back Entry Plate with Cable Clamps
- 설치 하드웨어(나사, 앵커)
- 사용 설명서
4. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 스텔프로 |
| 모델 번호 | ASHC2002W |
| 전력 출력 | 2000W(240V 기준) / 1500W(208V 기준) |
| 권tage | 240 Volts (or 208 Volts) |
| 연료 유형 | 전기 같은 |
| 난방 범위 | 최대 200제곱피트 |
| 치수(높이 x 너비 x 깊이) | 17 9/16" x 35" x 3 15/16" (approx. 17.56" x 35" x 3.94") |
| 품목 무게 | 18.9파운드 |
| 색상 | 하얀색 |
| 장착 유형 | Wall Mount (Surface-mount) |
| 특별 기능 | Electronic Thermostat, Energy Efficient, Fast Heating, Noiseless |
이미지 4.1: 제품 치수
5. 설치
IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.
Image 5.1: Hardwired Connection Requirement
5.1 히터 장착
- Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
- Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
- Mark the drilling points on the wall using the concealed bracket as a template.
- Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
- 제공된 나사를 사용하여 장착 브래킷을 벽에 고정합니다.
- Ensure the bracket is level and securely fastened to support the heater's weight.
Image 5.2: Concealed Mounting Bracket
5.2 전기 배선
- 메인 차단기에서 전원이 꺼져 있는지 확인하십시오.
- Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
- Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
- Secure all connections and ensure no bare wires are exposed.
- Carefully attach the heater to the mounted bracket, ensuring it locks into place.
- 주 회로 차단기에서 전원을 복구하세요.
6. 사용 설명서
Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.
Image 6.1: Built-in Electronic Thermostat
6.1 온도 설정
- Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
- 히터는 설정된 온도를 자동으로 유지합니다.
6.2 작동 모드
- 자동 모드: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
- 보안 모드: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.
7. 유지관리
정기적인 유지관리를 통해 히터의 최적의 성능과 수명을 보장할 수 있습니다.
- 청소: Ensure the heater is turned off and cool before cleaning. Use a soft, damp 천으로 외부를 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
- Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
- 연례 검사: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.
8. 문제 해결
If your heater is not operating correctly, consult the following common issues before contacting support:
- 히터가 켜지지 않음: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
- 열이 부족합니다: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
- 특이한 소음: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
- 온도 조절기 디스플레이 문제: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.
For persistent issues or complex problems, please refer to the warranty and support section.
9. 보증 및 지원
Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:
- 5년 한정 보증 전체 유닛에 대해.
- 평생 보증 발열체에 대하여.
- 3년 보증 전자 부품에 관하여.
For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro web대지.
