ESKY Scale 300 V2 Flybarless RTF RC Electric Helicopter

소개

The ESKY Scale 300 V2 Flybarless RTF (Ready To Fly) RC Electric Helicopter is designed for remote control enthusiasts of all skill levels. This model features a robust and sleek design, incorporating advanced technology such as a flybarless rotor head and a 6-axis gyroscope for enhanced stability and performance. Its compact size and impressive maneuverability make it an excellent choice for both indoor and outdoor flight. This manual provides comprehensive instructions for the safe and effective setup, operation, and maintenance of your ESKY Scale 300 V2 helicopter.

안전 예방 조치

Always prioritize safety when operating your RC helicopter. Failure to follow these guidelines may result in injury or damage to the product or property.

• 매뉴얼을 읽어보세요: Thoroughly read and understand this entire instruction manual before operating the helicopter.
• 운영 환경: Operate the helicopter in open, clear areas, away from people, animals, buildings, power lines, and other obstacles. Avoid flying in windy conditions.
• 연령 권장 사항: This product is recommended for users aged 14 months and older. Adult supervision is advised for younger users.
• 배터리 안전:
  • Use only the specified LiPo battery and charger.
  • 배터리를 과충전하거나 과방전하지 마십시오.
  • 충전 중인 배터리를 절대로 방치하지 마십시오.
  • Store batteries in a cool, dry place, away from direct sunlight and heat sources.
  • If the battery becomes swollen, punctured, or damaged, discontinue use immediately and dispose of it properly.
• 로터 블레이드: 로터 블레이드는 고속으로 회전하므로 심각한 부상을 입을 수 있습니다. 손, 얼굴, 헐렁한 옷이 회전하는 블레이드에 닿지 않도록 하십시오.
• 비행 전 점검: Always perform a pre-flight check to ensure all components are securely attached and functioning correctly.
• 비상 정지 : Familiarize yourself with the throttle cut/emergency stop function on the transmitter.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x ESKY Scale 300 V2 Helicopter (Mode 1)
• 1 x 2.4 GHz 4-Channel Transmitter
• 1 x 2S 7.4V 320mAh LiPo Battery
• 1 x USB 충전기
• 1 x Spare Main and Tail Rotor Set
• 1 x Tool Set (Screwdriver and Hex Wrench)
• 1 x 사용 설명서

메모: 4 x AA batteries are required for the transmitter and are not included in the package.

Image: The ESKY Scale 300 V2 helicopter laid out with its accompanying accessories, including the transmitter, battery, charger, spare blades, and tools.

설정

1. 비행 배터리 충전

The included 2S 7.4V 320mAh LiPo battery must be fully charged before first use. Use only the provided USB charger.

1. USB 충전기를 호환되는 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 연결하십시오.
2. Connect the LiPo battery to the charger. Ensure the polarity is correct.
3. The charger's indicator light will show the charging status (refer to charger's specific light indications for full charge).
4. 배터리가 완전히 충전되면 충전기에서 분리하십시오. 과충전하지 마십시오.

2. 송신기 배터리 설치

Open the battery compartment on the back of the 2.4 GHz transmitter and insert 4 AA batteries, observing the correct polarity. Close the compartment securely.

3. Installing the Flight Battery in the Helicopter

Carefully open the battery hatch on the helicopter's fuselage. Insert the charged LiPo battery into the compartment and secure it, ensuring wires are not pinched. Connect the battery to the helicopter's power connector.

이미지: A view of the ESKY Scale 300 V2 helicopter's battery compartment, showing the LiPo battery securely placed inside.

4. 송신기와 헬리콥터 바인딩

Your helicopter and transmitter are typically pre-bound from the factory. If re-binding is necessary, follow these general steps:

1. 송신기가 꺼져 있고 헬리콥터 배터리가 분리되어 있는지 확인하십시오.
2. 송신기를 켜세요.
3. Connect the helicopter battery. The helicopter's indicator light will flash.
4. Press and hold the bind button on the transmitter (if available) or follow the specific binding sequence outlined in the separate transmitter manual.
5. Once bound, the helicopter's indicator light will become solid.

작동 지침

비행 전 확인

• 비행용 배터리가 완전히 충전되어 있고 안전하게 설치되었는지 확인하십시오.
• Verify transmitter batteries are installed and the transmitter is powered on.
• Check that all rotor blades (main and tail) are securely attached and free from damage.
• Confirm that the flight area is clear of obstacles, people, and animals.

기본 비행 조작 (모드 1)

The ESKY Scale 300 V2 operates in Mode 1, where throttle and rudder are on the right stick, and elevator and aileron are on the left stick.

Take-off, Hovering, and Landing

• 이륙하다: Place the helicopter on a flat, level surface. Slowly increase the throttle until the helicopter lifts off the ground. Make small, precise adjustments to maintain stability.
• 호버링: Once airborne, adjust the throttle to maintain a constant altitude. Use the elevator and aileron sticks for minor positional corrections to keep the helicopter stable in the air.
• 착륙: Slowly decrease the throttle while maintaining control with the other sticks. Aim for a gentle descent onto a flat surface. Once landed, immediately reduce throttle to zero.

특별 기능

• 6-Axis Gyro Stabilization: The integrated 6-axis gyroscope provides excellent flight stability, making it easier for beginners to control.
• Anti-Panic Switch: This feature helps stabilize the helicopter if you lose control. Refer to your transmitter manual for the exact button and operation.
• Dual Rate Switch: Adjusts the sensitivity of the controls. Use lower rates for beginners for smoother, less aggressive control, and higher rates for experienced pilots for more agile maneuvers.
• LED 조명: Bright LED lights aid in orientation during flight, especially in low-light conditions.

Image: The ESKY Scale 300 V2 helicopter, showcasing its sleek black and white fuselage and main rotor blades, ready for flight.

유지

Regular maintenance ensures the longevity and optimal performance of your helicopter.

• 청소: After each flight, gently wipe down the helicopter with a soft, dry cloth to remove dust and debris. Avoid using water or solvents.
• 로터 블레이드 검사: Regularly inspect the main and tail rotor blades for any cracks, chips, or deformation. Replace damaged blades immediately using the provided spare set or genuine Esky parts.
• 모터 및 기어 점검: Check the motors and gears for any signs of wear or obstruction. Ensure smooth rotation of all moving parts.
• 배터리 관리 :
  • Do not store LiPo batteries fully charged or fully discharged for extended periods. Store them at a "storage charge" (around 3.8V per cell).
  • If the helicopter will not be used for a long time, disconnect the battery from the helicopter.
• 나사 조임 정도: 모든 나사와 패스너가 단단히 조여져 있는지 정기적으로 점검하세요. 너무 세게 조이지 마세요.

이미지: 자세한 view of the helicopter's flybarless rotor head assembly, showing the main rotor attachment points.

Image: A close-up shot of the helicopter's tail rotor, highlighting its design and connection to the tail boom.

문제 해결

일반적인 문제와 이에 대한 잠재적 해결책은 이 섹션을 참조하세요.

명세서

보증 및 지원

For warranty information, technical support, or inquiries regarding spare parts, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

You may also find support and community resources via the following links:

• WeChat 공식 계정
• WeChat Work Contact

Image: The retail packaging box for the ESKY Scale 300 V2 helicopter, displaying product features and QR codes for support.