1. 서론
This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro X12SPO-NTF-O Server Motherboard. This high-performance motherboard is designed to support 3rd Gen Intel Xeon Scalable processors, offering robust features for server environments, including advanced memory support and high-speed networking capabilities. Please read this manual thoroughly before proceeding with installation or operation to ensure proper functionality and safety.
2. 안전 정보
메인보드 손상 및 부상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 구성품을 설치하거나 제거하기 전에 항상 전원 코드를 전원 공급 장치에서 분리하십시오.
- Wear an anti-static wrist strap when handling the motherboard or any internal components to prevent electrostatic discharge (ESD) damage.
- Ensure the system is placed on a stable, flat surface during installation.
- 마더보드를 습기나 극한의 온도에 노출시키지 마세요.
- 전원 연결과 관련된 구체적인 안전 지침은 전원 공급 장치의 설명서를 참조하십시오.
3. 패키지 내용
Verify that all items listed below are present in your motherboard package. If any items are missing or damaged, contact your vendor immediately.
- Supermicro X12SPO-NTF-O Server Motherboard
- I / O 실드
- SATA 케이블 (수량은 다를 수 있습니다)
- 빠른 참조 가이드
- Driver & Utility DVD (or download instructions)
- Mounting Screws for M.2 devices
Image: The Supermicro X12SPO-NTF-O Server Motherboard, typically shown with its included accessories such as SATA cables and I/O shield, laid out on an anti-static mat. This image represents the main product and its standard package contents.
4. 설정
4.1 마더 보드 설치
- Prepare your server chassis by ensuring it is clean and has adequate space for the motherboard.
- Install the I/O shield into the chassis's rear panel opening.
- 마더보드를 케이스의 스탠드오프에 맞춰 조심스럽게 정렬하십시오.
- Secure the motherboard using the appropriate screws, ensuring not to overtighten.
4.2 구성 요소 설치
4.2.1 CPU Installation (LGA-4189)
- CPU 소켓 고정 장치를 엽니다.
- Carefully place the 3rd Gen Intel Xeon Scalable processor into the socket, aligning the gold triangle on the CPU with the corresponding mark on the socket.
- 고정 장치를 닫아 CPU를 고정합니다.
- 열전도성 페이스트를 바르고 제조업체의 지침에 따라 CPU 쿨러를 설치합니다.
4.2.2 메모리(RAM) 설치
The motherboard supports up to 2TB 3DS ECC RDIMM/LRDIMM DDR4-3200MHz memory across 8 DIMM slots, and up to 2TB Intel Optane Persistent Memory.
- DIMM 슬롯 양쪽 끝에 있는 클립을 엽니다.
- 메모리 모듈을 슬롯에 맞춰서 모듈의 홈이 슬롯의 키와 일치하는지 확인합니다.
- 클립이 제자리에 고정될 때까지 메모리 모듈의 양쪽 끝을 단단히 누릅니다.
4.2.3 저장장치 설치
The motherboard features 2 M.2 slots (SATA/PCI-E 3.0 x4, 2280/22110 form factor) and 10 SATA3 (6 Gbps) ports, along with support for 10 NVMe drives via SlimSAS connectors.
- M.2 SSD: Insert the M.2 SSD into the slot at an angle, then push it down and secure it with the provided screw.
- SATA 드라이브: Connect SATA data cables from the motherboard's SATA ports to your SATA hard drives or SSDs. Connect power cables from the PSU to the drives.
- NVMe Drives (SlimSAS): Connect SlimSAS cables from the motherboard to compatible NVMe backplanes or drives.
4.3 전원 연결
Connect the 24-pin ATX main power connector and the 8-pin (or 4+4-pin) CPU power connector from your power supply unit to the corresponding ports on the motherboard.
5. 운영
After all components are installed and connected, power on your system. The motherboard will initiate the Power-On Self-Test (POST) sequence. You may need to install an operating system if one is not pre-installed on your storage device.
5.1 BIOS/UEFI 구성
To access the BIOS/UEFI setup utility, press the designated key (usually 델 or F2) during the POST sequence. Within the BIOS/UEFI, you can configure boot order, system time, hardware settings, and enable/disable various features. Refer to the Supermicro website for the latest BIOS/UEFI manual for detailed settings.
6. 유지관리
Regular maintenance helps ensure the longevity and optimal performance of your Supermicro motherboard.
- 먼지 제거: 압축 공기를 사용하여 마더보드와 부품의 먼지를 주기적으로 청소하십시오. 청소하기 전에 시스템 전원이 꺼져 있고 플러그가 뽑혀 있는지 확인하십시오.
- BIOS/펌웨어 업데이트: 슈퍼마이크로 확인 website for the latest BIOS and firmware updates. Updating can improve stability, performance, and add new features. Follow update instructions carefully.
- 케이블 관리 : 공기 흐름을 개선하고 간섭을 방지하기 위해 케이블이 깔끔하게 배선되었는지 확인하세요.
- 환경 제어: Operate the server in a cool, dry, and well-ventilated environment to prevent overheating.
7. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.
| 문제 | 가능한 해결책 |
|---|---|
| 시스템 전원이 켜지지 않습니다. | Check power supply connections to the motherboard and components. Verify the power supply unit is functional. Ensure the front panel power button is correctly connected. |
| 디스플레이 출력이 없습니다. | Ensure the monitor is connected and powered on. Check the discrete graphics card (if installed) and its power connections. Reseat RAM modules. |
| System beeps during POST. | Refer to the motherboard's beep code table (usually found in the full manual on the Supermicro website) to diagnose the issue (e.g., memory error, CPU error). |
| 운영 체제가 로드되지 않습니다. | Check boot order in BIOS/UEFI. Verify storage drive connections. Run diagnostic tools on the storage drive. |
| 네트워크 연결 문제. | Ensure network cables are properly connected. Check network driver installation. Verify network settings in the operating system. |
8. 사양
Key technical specifications for the Supermicro X12SPO-NTF-O Server Motherboard:
| 특징 | 세부 사항 |
|---|---|
| CPU 소켓 | Single Socket LGA-4189 (Socket P+) |
| 호환 프로세서 | 3세대 인텔 제온 스케일러블 프로세서(최대 270W TDP) |
| 칩셋 | 인텔 C621A |
| 메모리 슬롯 | 8x DDR4 DIMM slots |
| 지원되는 메모리 유형 | 3DS ECC RDIMM, LRDIMM DDR4-3200MHz; Intel Optane Persistent Memory |
| 최대 메모리 용량 | 최대 2TB |
| PCI-E 확장 슬롯 | 1x PCI-E 4.0 x16, 5x PCI-E 4.0 NVMe x8 Internal Port(s) |
| M.2 슬롯 | 2x M.2 (SATA/PCI-E 3.0 x4, 2280/22110, M-Key) |
| SATA 포트 | 10x SATA3 (6 Gbps) via Intel C621A (RAID 0,1,5,10) |
| NVMe 지원 | Supports 10x NVMe drives via SlimSAS connectors |
| 랜 | Dual LAN with Intel X550 10GBase-T Ethernet Controller |
| 폼 팩터 | Micro-ATX (implied by product title, though not explicitly in specs) |
| 품목 모델 번호 | MBD-X12SPO-NTF-O |
9. 보증 및 지원
Supermicro products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Supermicro web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For technical support, driver downloads, BIOS updates, and additional documentation, please visit the official Supermicro support website. You can also contact Supermicro customer service directly for assistance with product-related inquiries.
참고: 이 설명서에는 판매자가 제공한 공식 제품 영상이 포함되어 있지 않습니다.
