소개
The DYNASTY PROAUDIO PMC-2 is a high-quality, passive volume controller designed for studio monitoring applications. Its completely passive design ensures a transparent audio path, allowing for precise level control without introducing coloration or noise. Ideal for integrating between your audio interface and active monitor speakers, the PMC-2 provides intuitive control over your listening volume.
안전 정보
- 본 제품을 비나 습기에 노출시키지 마십시오.
- c를 열지 마세요asing. 내부에는 사용자가 수리할 수 있는 부품이 없습니다. 모든 수리는 자격을 갖춘 기술자에게 맡기십시오.
- 장치를 작동하기 전에 모든 연결이 안전한지 확인하세요.
- 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
- This device is passive and does not require a power supply for its core function.
설정
The PMC-2 is designed for easy integration into your studio setup. As a passive device, it does not require an external power supply.
- Identify Inputs and Outputs: The rear panel of the PMC-2 features various input and output options.
- 입력: Balanced Combo XLR / Phone Jack, RCA Audio Line, and Mini Jack TRS 3.5mm.
- 출력: Balanced XLR, Phone Jack, and Mini Jack.
- 오디오 소스 연결: Connect your audio source (e.g., audio interface, PC sound card, or other analog signal sources) to the desired input on the PMC-2 using appropriate cables.
- Connect Monitor Speakers/Amp정수기: Connect the outputs of the PMC-2 to your active monitor speakers or amplifier using appropriate balanced XLR or Phone Jack cables.
- 초기 볼륨 설정: Before playing audio, ensure the large rotary volume control knob on the PMC-2 is set to its minimum position (fully counter-clockwise).
운영
The PMC-2 offers straightforward operation for controlling your studio monitor volume.
- 볼륨 조절: The large rotary knob on the top panel is the primary volume control. Rotate it clockwise to increase volume and counter-clockwise to decrease volume. This knob provides precise attenuation of the analog audio signal.
- 입력 선택: Use the 'INPUT' button to toggle between the 'COMBO' (XLR/Phone Jack) and 'RCA/AUX' (RCA/Mini Jack) inputs.
- 출력 선택: Use the 'SELECT' button to toggle between 'XLR' and 'TRS/AUX' outputs.
- 음소거 기능: Press the 'MUTE' button to instantly silence the audio output. Press it again to unmute.
- 모노/스테레오 스위치: The 'MONO/STEREO' switch allows you to switch the audio output between stereo and summed mono. This is useful for checking mixes for mono compatibility.
- 희미한 기능: Press the 'DIM' button to reduce the output volume by a fixed amount (-20dB). This is useful for quickly lowering the volume without losing your main volume setting. Press it again to return to the original volume.
유지
The DYNASTY PROAUDIO PMC-2 is built with a robust metal enclosure designed for durability and requires minimal maintenance.
- 청소: 제품 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 스프레이형 세척제는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
- 저장: 장기간 사용하지 않을 경우 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 손질: While durable, avoid dropping the unit or subjecting it to excessive force, which could damage the internal circuitry or external controls.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 오디오 출력이 없습니다. | Mute button engaged; incorrect input/output selection; loose cables; source device not playing. | Check if the MUTE button is disengaged. Verify correct input and output selection. Ensure all audio cables are securely connected. Confirm audio is playing from the source device. |
| 음량이 작거나 소리가 왜곡되었습니다. | DIM button engaged; volume knob too low; incorrect gain staging from source; faulty cables. | Check if the DIM button is disengaged. Increase the volume knob. Adjust output level from your audio source. Try different audio cables. |
| Audio only from one speaker. | Mono mode engaged; faulty cable; issue with source or speaker. | Ensure the MONO/STEREO switch is set to STEREO. Check the cable connections for both left and right channels. Test with different cables or swap speakers to isolate the issue. |
명세서
- 모델: PROAUDIO PMC 2
- 제품 크기: 3.6인치 깊이 x 7.6인치 너비 x 2.2인치 높이
- 품목 무게: 1.83파운드
- 재료 유형: 금속
- 호환 장치: PC (for audio routing)
- 커넥터 유형: XLR, Phone Jack (1/4"), RCA, Mini Jack TRS (3.5mm)
- 특징: Passive Volume Control, Input Selection, Output Selection, Mute, Mono/Stereo Switch, DIM (-20dB)
- 전력 요구 사항: Completely Passive (No external power supply required)
보증 및 지원
DYNASTY PROAUDIO products are designed for reliability and performance. For warranty information and technical support, please refer to the official DYNASTY PROAUDIO web사이트를 방문하거나 공인 대리점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
추가 지원이 필요하면 다음을 방문하세요. DYNASTY PROAUDIO Store on Amazon.
