Pulsar 휴대용 파워 스테이션 PPS500 사용자 설명서

1. 서론

The Pulsar Portable Power Station PPS500 is a versatile and reliable power solution designed to provide electricity for various applications, from outdoor adventures to emergency backup. Featuring a 518Wh lithium-ion battery and multiple output ports, it offers convenient power for your electronic devices and small appliances.

2. 안전 지침

• 본 제품을 분해, 수리 또는 개조하지 마십시오. 잘못 재조립할 경우 화재나 부상을 입을 수 있습니다.
• 제품을 화기 또는 극한 온도에 노출시키지 마십시오.
• 본 제품을 직사광선이나 더운 환경에서 사용하거나 보관하지 마십시오.
• 제품을 물, 습기 및 부식성 물질로부터 멀리하십시오.
• 과열을 방지하기 위해 사용 중에는 적절한 환기를 보장하십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 제품과 배터리는 현지 규정에 따라 폐기하십시오.

3. 패키지 내용

• Pulsar Portable Power Station PPS500
• 충전 케이블

4. 제품 오버view

Familiarize yourself with the various components and ports of your PPS500 unit.

그림 4.1: 앞쪽 view of the Pulsar PPS500 Portable Power Station, showing its control panel with power button, display, AC outlets, DC outlets, USB ports, and wireless charging pad.

주요 구성 요소:

• 전원 버튼: Activates/deactivates the unit.
• LCD 디스플레이: 배터리 수준, 입력/출력 와트를 표시합니다.tage 및 상태 표시기.
• AC 콘센트: Two 110V, 60Hz, 500W pure sine wave outlets.
• DC 입력 : For charging the power station.
• 12V Car Outlet: Standard automotive power socket.
• 12V DC Outlets: 두 10 amp DC outlets.
• USB-A Outlets: Three USB-A ports for charging devices.
• USB-C Outlet: One USB-C port for charging compatible devices.
• 무선 충전 패드: For compatible smartphones and devices.

5. 설정

5.1 초기 충전

Before first use, fully charge your PPS500. Connect the provided charging cable to the DC Input port on the unit and plug it into a standard wall outlet. The LCD display will indicate charging status. A full charge typically takes several hours.

5.2 충전 옵션

• AC 벽면 충전기: Use the included charging cable for standard wall charging.
• 태양광 패널(별도 판매): The PPS500 is compatible with solar panels for charging. Connect a compatible solar panel to the DC Input port.

6. 사용 설명서

6.1 켜기/끄기

Press and hold the main power button for a few seconds to turn the unit on or off. The LCD display will illuminate when the unit is active.

6.2 AC 콘센트 사용

1. Ensure the PPS500 is powered on.
2. Press the AC power button to activate the AC outlets. An indicator light will confirm activation.
3. Plug your 110V AC appliance into one of the two AC outlets.
4. The LCD display will show the output wattage.
5. AC 출력을 끄려면 AC 전원 버튼을 다시 누르십시오.

그림 6.1: The Pulsar PPS500 Portable Power Station in a camping setting, demonstrating an AC outlet in use with a yellow power cable.

6.3 Using DC Outlets (12V Car & 12V DC)

1. Ensure the PPS500 is powered on.
2. Press the DC power button to activate the DC outlets. An indicator light will confirm activation.
3. Plug your 12V device into the car outlet or one of the two 12V DC outlets.
4. The LCD display will show the output wattage.
5. To turn off DC output, press the DC power button again.

그림 6.2: The Pulsar PPS500 Portable Power Station on a camping table, actively powering a device, illustrating its use in an outdoor environment.

6.4 USB 포트 사용 (USB-A 및 USB-C)

1. Ensure the PPS500 is powered on.
2. The USB ports are typically active when the unit is on.
3. Connect your USB-powered devices to the appropriate USB-A or USB-C ports.
4. The LCD display may show the output wattage for USB ports.

6.5 Using the Wireless Charging Pad

1. Ensure the PPS500 is powered on.
2. Place your Qi-compatible device (e.g., smartphone) on the wireless charging pad located on top of the unit.
3. 최적의 충전을 위해 기기가 충전 패드 중앙에 위치하도록 하십시오.
4. Your device should indicate that it is charging wirelessly.

그림 6.3: The Pulsar PPS500 Portable Power Station demonstrating its wireless charging capability with a smartphone placed on the charging pad, alongside an AC connection.

7. 유지관리

7.1 청소

마른 부드러운 천으로 제품을 닦으십시오. 연마성 세제를 사용하거나 제품을 물에 담그지 마십시오.

7.2 보관

• Store the PPS500 in a cool, dry place, away from direct sunlight and extreme temperatures.
• 장기간 보관 시에는 배터리 수명 연장을 위해 3~6개월마다 기기를 50~80% 정도 충전하십시오.

7.3 배터리 관리

The PPS500 uses a lithium-ion battery. Avoid fully discharging the battery frequently, as this can reduce its lifespan. Regular partial discharges and recharges are recommended.

8. 문제 해결

8.1 장치가 켜지지 않음

• Ensure the battery is charged. Connect the unit to a power source and allow it to charge for a period.
• 전원 버튼을 몇 초간 꾹 눌러주세요.

8.2 포트에서 출력이 없음

• Verify that the specific output section (AC, DC) is activated by pressing its respective power button.
• Check if the device you are trying to power exceeds the maximum output wattage of the PPS500 (500W for AC).
• 케이블이 단단히 연결되어 있는지 확인하십시오.
• If the unit has overheated, it may temporarily shut down. Allow it to cool down before attempting to use it again.

8.3 느린 충전

• Ensure you are using the original charging cable and adapter.
• Check the power source for adequate voltage.
• Environmental temperature can affect charging speed; avoid charging in extremely cold or hot conditions.

9. 사양

10. 보증 및 지원

10.1 보증 정보

The Pulsar Portable Power Station PPS500 comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.

10.2 고객 지원

For technical assistance, warranty inquiries, or any questions regarding your Pulsar PPS500, please contact Pulsar customer support. Refer to the product packaging or the official Pulsar web연락처 정보 사이트.