Progress Lighting AirPro 52인치 브러시드 니켈 천장형 선풍기(모델 P250081-009-WB) 사용 설명서

1. 안전 정보

Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• 전기 안전: Ensure power is disconnected at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes.
• 설치: The ceiling fan must be mounted to a structurally sound ceiling joist or outlet box capable of supporting the fan's weight (minimum 35 lbs).
• 블레이드 클리어런스: 선풍기 날개와 바닥 사이의 최소 간격은 7피트(약 2.1미터)를 유지하십시오.
• 전문적인 설치: 배선이나 설치에 대해 확신이 서지 않는다면 자격을 갖춘 전기 기술자에게 문의하십시오.
• 제안 65 경고: 이 제품을 사용하면 캘리포니아 주에서 암, 선천적 결함 또는 기타 생식 장애를 유발하는 것으로 알려진 화학 물질에 노출될 수 있습니다.

2. 패키지 내용

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Progress Lighting customer service.

그림 2.1: 폭발했다 view of the AirPro ceiling fan components. This image shows the main parts such as the motor housing, downrod, canopy, fan blades, and the light kit with shades.

• 모터 하우징 어셈블리
• 팬 블레이드 (5)
• 블레이드 암 (5)
• 라이트 키트 어셈블리
• Frosted Polypropylene Shades (4)
• LED Bulbs (4, 8.5-Watt, 3000K)
• 다운로드 및 캐노피
• 장착 브래킷 및 하드웨어
• (선풍기 속도 및 조명 조절용) 당김줄
• 설치 시트

3. 사양

그림 3.1: Product dimensions of the AirPro 52-inch ceiling fan.

그림 3.2: Energy Guide for the AirPro ceiling fan, highlighting energy efficiency.

4. 설치

This section provides step-by-step instructions for installing your Progress Lighting AirPro ceiling fan. Refer to the included installation sheet for detailed diagrams.

그림 4.1: Reference the official installation manual cover for detailed diagrams.

4.1 팬 장착

1. 전원 끄기: Before starting, ensure the power supply to the outlet box is turned off at the circuit breaker.
2. 안전한 장착 브래킷: Attach the mounting bracket to the ceiling outlet box. Ensure the outlet box is securely fastened to the building structure and can support the fan's weight.
3. 다운로드 조립: 다운로드를 캐노피에 끼우고 팬 모터 하우징에 연결하십시오. 제공된 핀과 나사로 고정하십시오.
4. 선풍기 걸이: Carefully lift the fan assembly and hang it from the mounting bracket using the ball joint in the downrod.

4.2 전기 배선

Connect the fan's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting the ground wire, neutral wire, and hot wires for fan and light operation.

• Connect the green/bare copper ground wire from the fan to the ground wire from the outlet box.
• Connect the white (neutral) wire from the fan to the white (neutral) wire from the outlet box.
• Connect the black (hot) wire from the fan to the black (hot) wire from the outlet box.
• If separate wires are available for fan and light control, connect them accordingly.

4.3 선풍기 날개 부착하기

Attach the five fan blades to the blade arms. The AirPro fan features reversible blades with Grey Weathered Wood on one side and Silver on the other, allowing you to choose your preferred aesthetic. The blade arms feature captive screws for easier installation.

그림 4.2: Reversible fan blade finishes: Grey Weathered Wood and Silver.

1. Select the desired blade finish (Grey Weathered Wood or Silver).
2. Attach each blade to a blade arm using the provided screws.
3. Secure each blade arm to the motor housing.

4.4 조명 키트 설치

Connect the light kit to the fan motor housing and install the LED bulbs and shades.

1. Connect the light kit wiring to the fan's light kit wiring.
2. 조명 키트 조립체를 팬 모터 하우징 하단에 고정하십시오.
3. Screw in the four included 8.5-Watt LED bulbs into the sockets.
4. Attach the four frosted polypropylene shades to the light kit.

5. 운영

Your AirPro ceiling fan is designed for ease of use with pull chain controls for both fan speed and light. An optional remote control accessory can be purchased separately for added convenience.

5.1 팬 속도 제어

The fan speed is controlled by pulling the fan pull chain. Each pull cycles through the available speeds:

• 1번 당김: 고속
• 당기기 2: 중간 속도
• 3번 당김: 저속
• 4번 당기기: 끄기

5.2 조명 제어

The integrated light kit is controlled by pulling the light pull chain. Each pull will toggle the light On or Off.

5.3 Reversing Fan Direction (Seasonal Use)

Most ceiling fans include a reverse switch on the motor housing to change the direction of blade rotation. This allows for optimal air circulation in different seasons:

• 여름 운영: 날개가 시계 반대 방향으로 회전하면서 공기를 아래로 밀어내 시원한 바람을 만들어냅니다.
• 겨울 운영: Blades rotate clockwise, drawing air up to circulate warm air near the ceiling.

To change direction, ensure the fan is off and completely stopped. Locate the reverse switch on the motor housing and slide it to the opposite position. Turn the fan back on.

6. 유지관리

정기적인 유지관리는 천장선풍기의 수명과 최적의 성능을 보장합니다.

• 청소: 팬은 부드러운 천으로 주기적으로 청소하세요.amp 천을 사용하십시오. 연마성 세제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오. 청소하기 전에 전원을 끄십시오.
• 블레이드 청소: 선풍기 날개의 먼지를 제거하려면 부드러운 천으로 닦아주세요.
• 전구 교체: The fan uses 8.5-Watt LED bulbs. When replacement is needed, ensure the power is off and allow bulbs to cool before handling. Replace with compatible LED bulbs.
• 나사를 조이세요: Check all screws, especially on the blade attachments and mounting hardware, periodically to ensure they are tight. Loose screws can cause wobbling or noise.

7. 문제 해결

If you experience issues with your AirPro ceiling fan, consult the following table before contacting customer service.

8. 보증 및 지원

8.1 보증 정보

The Progress Lighting AirPro Ceiling Fan (Model P250081-009-WB) comes with a 30년 한정 보증본 보증은 정상적인 사용 및 서비스 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

For full warranty details, please refer to the documentation included with your product or visit the official Progress Lighting web대지.

8.2 고객 지원

If you require further assistance or have questions not covered in this manual, please contact Progress Lighting customer support:

• Web대지: www.progresslighting.com
• 핸드폰: Refer to the contact information on the Progress Lighting web사이트 또는 제품 포장.

When contacting support, please have your model number (P250081-009-WB) and date of purchase readily available.