Intel NUC8CCHKRN

Intel NUC 8 Rugged NUC8CCHKRN Desktop Computer User Manual

설치, 작동, 유지관리에 대한 포괄적인 지침입니다.

1. 서론

This manual provides essential information for the Intel NUC 8 Rugged NUC8CCHKRN Desktop Computer. It covers the basic setup, operational guidelines, maintenance procedures, and troubleshooting tips to ensure optimal performance and longevity of your device.

The Intel NUC (Next Unit of Computing) is a small form factor PC designed to deliver full-sized computing power in a compact design.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Intel NUC 8 Rugged NUC8CCHKRN Desktop Computer
  • 전원 어댑터
  • 빠른 시작 가이드(포함된 경우)

If any items are missing or damaged, please contact your retailer or Intel support.

3. 제품 오버view

앞쪽 view of the Intel NUC 8 Rugged NUC8CCHKRN Mini PC, showing a USB 3.0 port and power button.

Figure 1: Front Panel of Intel NUC 8 Rugged NUC8CCHKRN
This image displays the front panel of the Intel NUC 8 Rugged NUC8CCHKRN. On the left, there is a blue USB 3.0 port. On the right, a power button with an illuminated power symbol is visible. The center features a recessed area, possibly for an optional drive or module.

전면 패널 기능:

  • USB 3.0 포트 : 고속 USB 장치를 연결하는 데 사용됩니다.
  • 전원 버튼: 장치를 켜거나 끄려면
  • Optional Drive Bay: A recessed area for potential expansion (e.g., M.2 SSD, depending on configuration).

Rear Panel Features (General):

While not pictured, the rear panel typically includes:

  • 전원 입력 잭
  • Video Output Ports (e.g., HDMI, DisplayPort)
  • 이더넷 포트(RJ-45)
  • 추가 USB 포트
  • Audio Jack (if applicable)

4. 설정 가이드

  1. 주변기기 연결: Connect your monitor(s) to the appropriate video output ports on the NUC. Connect a USB keyboard and mouse to the available USB ports.
  2. 네트워크에 연결: For a wired connection, connect an Ethernet cable from your router or modem to the NUC's Ethernet port. For wireless, you will configure this after initial boot.
  3. 전원 연결: Plug the power adapter into the NUC's power input jack, then plug the other end into a wall outlet.
  4. 전원 켜기: NUC 전면 패널의 전원 버튼을 누르십시오. 전원 표시등이 켜질 것입니다.
  5. Initial Boot and OS Setup: Follow the on-screen instructions to complete the operating system setup. This model is listed as having Windows 10 pre-installed.

5. 사용 설명서

전원 켜기/끄기:

  • 전원을 켜려면: 전원 버튼을 한 번 누르세요.
  • 전원을 끄려면:
    • 표준 종료: Use the operating system's shutdown procedure (e.g., Start > Power > Shut down in Windows). This is the recommended method to prevent data loss.
    • 강제 종료: Press and hold the power button for approximately 4-6 seconds until the device powers off. Use this only if the system is unresponsive.

Wi-Fi에 연결:

If not using a wired connection, configure Wi-Fi through the operating system's network settings. Select your network and enter the password.

Updating Drivers and Software:

It is recommended to regularly update your operating system, device drivers, and applications to ensure optimal performance and security. Visit the Intel support website for the latest NUC drivers.

6. 유지관리

  • 청소: Use a soft, dry cloth to clean the exterior of the NUC. For stubborn marks, a slightly damp cloth can be used. Avoid abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
  • 통풍: Ensure that the ventilation openings are not blocked to prevent overheating. Do not place the NUC in an enclosed space without adequate airflow.
  • 소프트웨어 유지보수: Regularly run antivirus scans, defragment hard drives (if applicable), and remove unnecessary file시스템 성능을 유지하기 위한 것입니다.
  • 데이터 백업: 데이터 손실을 방지하려면 중요한 데이터를 주기적으로 외장 드라이브나 클라우드 스토리지에 백업하세요.

7. 문제 해결

문제가능한 원인해결책
전원이 없습니다Power cable not connected, faulty outlet, power adapter issue.Check power cable connections. Try a different power outlet. Ensure power adapter is functioning.
모니터에 표시되지 않음모니터가 연결되지 않았습니다. 입력 소스가 잘못되었습니다. 케이블에 문제가 있습니다.Verify monitor cable connection. Select correct input source on monitor. Try a different cable or monitor.
시스템 속도가 느리거나 응답하지 않습니다.Too many applications running, insufficient memory, malware.Close unnecessary applications. Restart the NUC. Run a system scan for malware. Check for system updates.
Wi-Fi가 연결되지 않음잘못된 비밀번호, 라우터 문제, 드라이버 문제.Wi-Fi 비밀번호를 확인하세요. 공유기를 재시작하세요. 장치 관리자에서 Wi-Fi 드라이버를 확인하세요.

추가적인 도움이 필요하시면 인텔 지원팀에 문의하십시오. web사이트를 방문하거나 고객 서비스에 문의하세요.

8. 사양

특징세부 사항
상표인텔
모델 번호NUC8CCHKRN
시리즈NUC 8 Rugged
폼 팩터미니 PC
프로세서Intel Celeron N3350 Dual-core (2 Core) 1.10 GHz
숫양4GB DDR4
메모리 속도2133MHz
플래시 메모리 용량64GB (XNUMX기가바이트)
하드 드라이브 인터페이스넷기어
그래픽 코프로세서인텔 HD 그래픽 500
무선형802.11ac
운영 체제윈도우 10
최대 화면 해상도3840x2160
패키지 크기7.2 x 5.1 x 3.8 인치
색상검은색

9. 보증 및 지원

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Intel support web사이트. 보증 약관은 지역 및 소매업체에 따라 다를 수 있습니다.

For technical support, driver downloads, and additional resources, please visit the official Intel support portal:

인텔 지원 Web대지

관련 문서 - NUC8CCHKRN

사전view 인텔 NUC 제품 NUC7CJY/NUC7PJY 기술 사양
인텔 NUC NUC7CJY 및 NUC7PJY 시리즈의 하드웨어, 구성 요소, 커넥터, 전원, 환경 요구 사항 및 BIOS에 대한 자세한 기술 제품 사양입니다. 기술 사용자 및 시스템 통합자를 대상으로 합니다.
사전view Intel NUC 키트 NUC11PAKi 시리즈 사용자 가이드
Intel NUC Kit NUC11PAKi7, NUC11PAKi5, NUC11PAKi3의 단계별 설치 가이드입니다. 케이스 분리, 메모리 및 저장 장치 설치, VESA 마운트, 전원 연결, OS 설치 및 드라이버 업데이트 방법을 다룹니다.
사전view Intel NUC 키트 NUC5CPYH 및 NUC5PPYH 사용자 가이드: 설치 및 설정
Intel NUC 키트 NUC5CPYH 및 NUC5PPYH에 대한 종합 사용자 가이드로, 메모리, 저장 장치, VESA 마운트, 운영 체제 및 드라이버 설치에 대한 내용을 다룹니다. 안전 주의 사항 및 설정 지침도 포함되어 있습니다.
사전view 인텔 NUC 키트 NUC6CAYS 사용자 가이드
인텔 NUC 키트 NUC6CAYS 사용자 가이드로, 하드웨어 설치(메모리, 2.5인치 드라이브), VESA 마운트, 전원 연결, Windows 10 설정, 드라이버 설치 및 운영 체제 복구 절차에 대한 자세한 지침을 제공합니다.
사전view Intel NUC 키트 NUC5i3RYH 및 NUC5i5RYH 사용자 가이드
이 사용자 가이드는 Intel NUC 키트 NUC5i3RYH, NUC5i3RYHS, NUC5i3RYHSN, NUC5i5RYH 및 NUC5i5RYHS의 설치 과정을 단계별로 안내합니다. 설치 과정에는 케이스 열기, 메모리 설치, SSD 설치, 케이스 닫기, VESA 브래킷 사용, 전원 연결, 운영 체제 설치 및 드라이버 업데이트가 포함됩니다.
사전view Intel NUC 11 퍼포먼스 키트 사용자 가이드: NUC11PAHi7, NUC11PAHi5, NUC11PAHi3 설치 및 설정
This user guide provides comprehensive step-by-step instructions for installing and setting up Intel NUC 11 Performance Kits, including models NUC11PAHi7, NUC11PAHi5, and NUC11PAHi3. Covers hardware installation, system memory, storage, power connection, and software setup.