1. 서론
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Behringer TD-3 Analog Bass Line Synthesizer. Please read this manual thoroughly to ensure proper use and to maximize the performance of your instrument.
The Behringer TD-3 is an analog bass line synthesizer designed to produce classic electronic music sounds. It features an all-analog signal path, a 16-step sequencer, and a resonant low-pass filter.
2. 설정
2.1 풀기
Carefully remove the TD-3 from its packaging. Retain the packaging materials for future transport or storage.
2.2 전원 연결
Connect the included DC power adapter to the 'DC IN' port on the rear panel of the TD-3. Plug the adapter into a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting power.
2.3 오디오 연결
- 주요 출력 : Connect the 'OUTPUT' jack (1/4" TS) on the rear panel to your mixer, audio interface, or amp리퍼.
- 헤드폰: Connect headphones to the 'PHONES' jack (1/4" TRS) on the front panel for private monitoring. Adjust the 'VOLUME' knob to a comfortable listening level.
2.4 MIDI/USB Connections
- 미디 인/아웃: Use standard 5-pin DIN MIDI cables to connect the 'MIDI IN' and 'MIDI OUT' ports to other MIDI devices for synchronization or control.
- USB: Connect the USB port to a computer for MIDI control and firmware updates.
2.5 CV/Gate Connections
The TD-3 features 'CV OUT' and 'GATE OUT' jacks (3.5mm TS) for integration with modular synthesizers and other analog control voltage equipment. These outputs transmit pitch and gate information from the sequencer.
이미지 1: Front panel and rear connections of the Behringer TD-3. This image displays the various knobs, buttons, and input/output jacks, including the power input, audio output, headphone jack, MIDI ports, USB port, and CV/Gate connections, all essential for setting up the device.
3. Operating the TD-3
3.1 전원 켜기
After all connections are made, switch the 'POWER' button on the rear panel to the 'ON' position. The unit will power up.
3.2 컨트롤 오버view
The TD-3's front panel is divided into several sections:
- VCO(권tage 제어 발진기): Controls the basic sound waveform and pitch.
- VCF(볼륨tage 제어 필터): Shapes the timbre of the sound.
- 봉투: Controls the decay of the filter.
- 시퀀서: Programs and plays musical patterns.
- 왜곡: Adds overdrive to the sound.
- 용량: 전체 출력 레벨을 조정합니다.
3.3 VCO Section
- 곡조: Adjusts the overall pitch of the oscillator.
- 파형: Selects between Sawtooth (bright, rich harmonics) and Square (hollow, reedy) waveforms.
3.4 VCF Section
- 끊다: Sets the frequency at which the filter begins to attenuate higher frequencies.
- 공명: Emphasizes frequencies around the cutoff point, creating a 'wah' effect at higher settings.
- 봉투: Controls the amount of filter envelope modulation applied to the cutoff frequency.
- DECAY : Determines the length of the filter envelope's decay phase.
- 악센트: Controls the intensity of the accent effect on notes.
3.5 Sequencer Operation
The TD-3 features a powerful 16-step sequencer for creating bass lines.
- 모드 스위치: Selects between 'WRITE' (for programming patterns) and 'PLAY' (for playing patterns or tracks).
- TRACK/PATTERN Selector: In 'PLAY' mode, choose between playing a single 'PATTERN' or a 'TRACK' (a chain of patterns). In 'WRITE' mode, select 'TRACK' to edit a track or 'PATTERN' to edit a pattern.
- PATTERN GROUP: Selects one of four groups (I, II, III, IV), each containing 8 patterns (1-8).
- 속도: Adjusts the playback speed of the sequencer.
- 시작 멈춤: Initiates or halts sequencer playback.
- WRITE/NEXT: Used to confirm steps during pattern writing or to advance to the next step.
- PITCH MODE: Selects the input source for pitch information (INT for internal keyboard, MIDI, USB, TRIG for external trigger).
- 시간 모드 : Sets the clock resolution for external synchronization (1PPS, 2PPQ, 24PPQ, 48PPQ).
- 기능 버튼: These buttons (DEL, INS, CH, COPY, PASTE, TRANSPOSE, ACCENT, SLIDE) perform various editing functions within the sequencer.
- STEP Buttons (1-8, 9, 0, 100, 200): Used for entering notes, selecting steps, and other functions depending on the mode.
3.6 Distortion Section
- 온 / 오프 스위치: Engages or bypasses the built-in distortion effect.
- 왜곡: 오버드라이브의 양을 조정합니다.
- 음정: Shapes the frequency content of the distorted sound.
- 수준: Controls the output level of the distortion effect.
3.7 볼륨 조절
The 'VOLUME' knob adjusts the overall output level of the TD-3. Use this to balance the TD-3's output with other instruments in your setup.
4. 유지관리
4.1 청소
Clean the TD-3 with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish and internal components.
4.2 보관
When not in use, store the TD-3 in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use the original packaging or a suitable protective case.
4.3 펌웨어 업데이트
베링거 제품을 주기적으로 점검하세요 website for available firmware updates. Updates can provide new features, improvements, and bug fixes. Follow the instructions provided with the firmware update carefully.
5. 문제 해결
5.1 사운드 출력 없음
- 전원 어댑터가 올바르게 연결되어 있고 기기의 전원이 켜져 있는지 확인하십시오.
- 모든 오디오 케이블이 제대로 연결되고 무결성이 유지되는지 확인하세요.
- Verify the 'VOLUME' knob is turned up.
- If using headphones, ensure they are fully plugged in and the volume is adjusted.
- Confirm that a pattern is playing and the 'MODE' switch is set to 'PLAY'.
5.2 Sequencer Not Playing
- Press the 'START/STOP' button to initiate playback.
- Ensure the 'MODE' switch is set to 'PLAY'.
- Check the 'TEMPO' knob setting; it might be set to a very slow speed.
- If synchronized externally, verify the external clock source is active and the 'TIME MODE' is correctly set.
5.3 MIDI Control Issues
- Ensure MIDI cables are connected correctly (MIDI OUT of controller to MIDI IN of TD-3).
- Verify that the TD-3 and your MIDI controller are on the same MIDI channel.
- Check the 'PITCH MODE' setting on the TD-3 to ensure it is set to 'MIDI' or 'USB' as appropriate.
6. 사양
| 특징 | 사양 |
|---|---|
| 모델 | TD-3 |
| 유형 | 아날로그베이스 라인 신디사이저 |
| 치수(길이 x 너비 x 높이) | 17.3 x 8.9 x 3.9인치(43.9 x 22.6 x 9.9cm) |
| 무게 | 2.8파운드(1.27kg) |
| 전원 공급 장치 | DC 전원 어댑터(포함) |
| 오디오 출력 | 1/4" TS, unbalanced |
| 헤드폰 출력 | 1/4" TRS, stereo |
| 미디 | MIDI In, MIDI Out (5-pin DIN) |
| USB | USB 유형 B |
| CV/Gate Outputs | 3.5mm T-S |
7. 보증 및 지원
Behringer products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official Behringer web사이트를 방문하거나 가까운 대리점에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
추가 지원을 받으려면 다음을 방문하세요. 아마존에서 베링거 스토어를 만나보세요 또는 베링거 공식 지원 페이지를 참조하십시오.
