Scheppach HF60 Table Router Instruction Manual

1. 서론

This instruction manual provides essential information for the safe and effective use of your Scheppach HF60 Table Router. Please read this manual thoroughly before operating the machine to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

그림 1: The Scheppach HF60 Table Router. This image displays the complete router unit with its blue base, grey table surface, and adjustable fences.

2. 일반 안전 지침

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or damage to the machine.

• 작업 영역 안전: 작업 공간을 깨끗하고 밝게 유지하십시오. 어수선하거나 어두운 곳은 사고의 위험이 있습니다. 가연성 액체, 가스 또는 먼지가 있는 곳 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마십시오.
• 전기 안전: 전동 공구 플러그는 콘센트와 일치해야 합니다. 플러그를 어떤 식으로든 개조하지 마십시오. 접지된 표면에 신체가 닿지 않도록 하십시오. 전동 공구를 비나 습기에 노출시키지 마십시오.
• 개인 안전: 보안경, 귀마개, 방진 마스크를 항상 착용하십시오. 적절한 복장을 착용하고 헐렁한 옷이나 장신구는 착용하지 마십시오. 머리카락, 옷, 장갑이 움직이는 부품에 닿지 않도록 하십시오.
• 도구 사용 및 관리: 전동 공구에 무리한 힘을 가하지 마십시오. 사용 용도에 맞는 전동 공구를 사용하십시오. 조정, 액세서리 교체 또는 전동 공구 보관 시에는 반드시 전원 플러그를 분리하십시오.
• 유지: 전동 공구를 유지 관리하십시오. 움직이는 부품의 오정렬 또는 바인딩, 부품 파손 및 기타 기기 작동에 영향을 줄 수 있는 상태가 없는지 확인하십시오.

3. 구성 요소 이상view

The Scheppach HF60 Table Router consists of several key components designed for precision woodworking:

• Router Unit: The main body housing the 1500W motor and spindle.
• 테이블 표면 : A robust work surface for supporting materials during routing.
• 테이블 확장기: Extendable wings on both sides of the main table for increased work support.
• Adjustable Fences: Guide the workpiece and ensure accurate cuts.
• Spindle Height Adjustment Mechanism: Allows precise control over the routing depth.
• Collet System: Accommodates router bits with 6mm, 8mm, and 12mm shank diameters.
• 전원 스위치: On/off control for the machine.
• 속도 제어 다이얼 : Adjusts the spindle rotation speed.

4. 설정

Proper setup is crucial for safe and accurate operation.

4.1 풀기 및 검사

Carefully remove all components from the packaging. Inspect the machine for any signs of damage that may have occurred during transit. Report any damage to your supplier immediately.

4.2 Assembly of Table Extenders

The HF60 comes with table extenders that can be attached to both sides of the main table. Secure these extenders using the provided hardware to expand your working surface (total table size 610 x 360 mm).

그림 2: The Scheppach HF60 Table Router in a workshop setting, demonstrating the practical table model with its extended work surface and fastening capabilities.

4.3 기계 조립

For stability and safety, it is recommended to securely mount the table router to a workbench or a dedicated stand. Use appropriate fasteners to prevent movement during operation.

4.4 전원 연결

Ensure the power switch is in the 'OFF' position before plugging the machine into a 230V power outlet. Verify that the power supply matches the machine's requirements.

5. 운영

Follow these steps for safe and effective operation of your Scheppach HF60 Table Router.

5.1 라우터 구성 요소 설치

1. 기계의 전원 플러그가 뽑혀 있는지 확인하세요.
2. Select the appropriate collet (6mm, 8mm, or 12mm) for your router bit.
3. 콜릿을 스핀들에 삽입합니다.
4. Insert the router bit into the collet, ensuring it is seated deeply enough to prevent slippage but not bottomed out.
5. Tighten the collet nut securely using the provided wrenches.

5.2 Spindle Height Adjustment

The spindle height can be adjusted from 0 to 40 mm to control the depth of cut.

그림 3: 클로즈업 view of the Scheppach HF60's spindle height adjustment mechanism, showing a workpiece being routed and the maximum routing depth of 40 mm.

Use the adjustment knob or crank to raise or lower the router bit to the desired height. Lock the adjustment mechanism once the desired height is set.

5.3 가변 속도 제어

The HF60 features variable speed control from 11500 to 24000 rpm. Adjust the speed according to the material being routed and the type of router bit used. Lower speeds are generally suitable for larger diameter bits and harder materials, while higher speeds are for smaller bits and softer materials.

5.4 Adjusting Fences

The aluminum fences guide your workpiece. Adjust them to the desired position to control the width of the cut or to support the workpiece against the router bit.

5.5 Routing Applications

The Scheppach HF60 is suitable for various routing tasks, including:

• Rounding edges
• 챔퍼링
• Flush trimming
• 그루빙
• 찬성file 라우팅
• 합동

그림 4: 시각적 전amples of various routing applications possible with the Scheppach HF60, including rounding, chamfering, flush trimming, grooving, profile routing, and jointing.

5.6 먼지 추출

The machine is designed for direct dust extraction to maintain a clean and safe working environment. Connect a suitable dust extraction system to the designated port.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your table router.

• 청소: After each use, disconnect the power and clean the machine, especially the table surface, fences, and spindle area, from dust and wood chips. Use a brush or compressed air.
• 매끄럽게 하기: Periodically lubricate moving parts, such as the spindle height adjustment mechanism, with a suitable lubricant.
• 점검: Regularly inspect the power cord for damage. Check all fasteners for tightness. Ensure router bits are sharp and free from damage.
• 저장: 기기를 건조하고 안전한 장소에 보관하고 어린이의 손이 닿지 않도록 하십시오.

7. 문제 해결

This section addresses common issues you might encounter with your table router.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Scheppach customer support or a qualified service technician.

8. 기술 사양

9. 보증 및 지원

For information regarding warranty coverage, technical support, or spare parts, please refer to the official Scheppach website or contact your local Scheppach dealer. Keep your purchase receipt as proof of purchase.