SCULPFUN S30 5.5W 레이저 조각기 및 절단기 사용 설명서

1. 중요한 안전 정보

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• 레이저 안전 : This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• 눈 보호: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• 통풍: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• 재료 안전: 레이저 가공에 안전한 것으로 지정된 재료만 조각하거나 절단하십시오. 반사율이 높거나, 가연성이 있거나, 알려지지 않은 재료는 피하십시오.
• 화재 위험: 레이저는 가연성 물질에 불을 붙일 수 있습니다. 작동 중에는 기기를 자리를 비우지 마십시오. 소화기를 가까이에 두십시오.
• 어린이와 애완동물: Keep children and pets away from the operating area. This device is not a toy.
• 비상 정지 : 비상 정지 버튼의 위치와 작동 방법을 숙지하세요.

2. 패키지 내용

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• 전원 어댑터 및 케이블
• USB 케이블
• 레이저 안전 안경
• 공구 세트 (렌치, 육각 렌치)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• 사용 설명서 (본 문서)

3. 설정 가이드

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내고 포장 내용물 목록과 비교하세요.
2. 프레임 조립: Connect the aluminum profiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. 배선 연결: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. 전원 연결: 전원 어댑터를 조각기에 연결한 다음 적절한 전원 콘센트에 연결하십시오.
7. 소프트웨어 설치: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. 사용 설명서

이 섹션에서는 일반적인view of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

이미지: 다양한 예시amples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. 작업 공간 준비: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. 컴퓨터에 연결: Connect the engraver to your computer via the USB cable.
3. 전원 켜기: Turn on the power switch on the engraver.
4. 소프트웨어 실행: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. 하중 설계: Import your desired image or design file 소프트웨어에.
6. 설정 조정: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. 포커스 레이저: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. 위치 자료: Use the software to jog the laser head and confirm the engraving area on your material.
9. 작업 시작: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. 전원 끄기 : Once complete, power off the engraver and disconnect it from the computer.

5. 유지관리

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• 깨끗한 렌즈: 레이저의 출력과 정밀도를 유지하려면 주기적으로 부드럽고 보풀 없는 천과 렌즈 세척액을 사용하여 레이저 렌즈를 청소하십시오.
• 레일과 바퀴를 깨끗하게 유지하세요: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• 움직이는 부품에 윤활유를 바르세요: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• 벨트 확인: Inspect the timing belts for tension and wear. Adjust or replace if necessary.
• 레이저 모듈 수명: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. 문제 해결

SCULPFUN S30 사용 중 문제가 발생하면 다음 일반적인 문제 및 해결 방법을 참조하십시오.

• 레이저 출력 없음:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • 소프트웨어에서 레이저 출력 설정을 확인하십시오.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• 기기가 컴퓨터에 연결되지 않습니다:
  • USB 케이블 연결 상태를 확인하십시오.
  • 소프트웨어에서 올바른 COM 포트가 선택되었는지 확인하십시오.
  • Reinstall USB drivers if necessary.
• 부정확한 조각/절단:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. 사양

8. 보증 및 지원

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN web대지.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN web대지: www.sculpfun.com