소개
The Keychron Q7 is a wired custom mechanical keyboard featuring a 70% layout, designed for versatility and performance. It supports QMK/VIA for extensive customization, includes hot-swappable Gateron G Pro Red switches, and is built with a double-gasket design for an enhanced typing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: The Keychron Q7 Custom Mechanical Keyboard, showcasing its compact 70% layout and aluminum build.
패키지 내용
Verify that all items listed below are included in your Keychron Q7 package:
Image: Diagram illustrating the Keychron Q7 keyboard and its accompanying accessories.
- 건반: 1x Fully Assembled Keychron Q7 Keyboard (includes Aluminum Case, PCB, Steel Plate, Sound Absorbing Foam, Case Foam, 10 Gaskets (6 installed, 4 in box))
- 구성 요소: 5 sets x Stabilizers, 1 set x Double-Shot PBT Keycaps, 1 set x Gateron G Pro Switches
- 케이블 : 1x Type-C to Type-C Cable, 1x Type-A to Type-C Adapter
- 도구: 1x Switch Puller, 1x Keycap Puller, 1x Screwdriver, 1x Hex Key
Note: All tools are located at the bottom of the box.
설정
1. 키보드 연결
- Locate the USB-C port on the back of the Keychron Q7 keyboard.
- Connect one end of the provided Type-C to Type-C cable to the keyboard.
- Connect the other end of the cable to your computer's USB-C port. If your computer only has USB-A ports, use the included Type-A to Type-C adapter.
- 키보드는 운영체제에서 자동으로 인식되어야 합니다.
2. Switching Operating System Layout
The Keychron Q7 features a physical switch to toggle between Windows and macOS layouts. This ensures proper key mapping for your specific operating system.
이미지: 측면 view of the Keychron Q7, showing the physical switch to select between Windows and macOS modes.
- Locate the switch on the side of the keyboard, near the USB-C port.
- Slide the switch to the 'Win' position for Windows/Linux systems.
- Slide the switch to the 'Mac' position for macOS systems.
작동 지침
QMK and VIA Customization
The Keychron Q7 fully supports QMK and VIA open-source firmware, allowing for extensive customization of key assignments, macros, and backlighting. This functionality is compatible with Mac, Windows, and Linux operating systems.
- To customize your keyboard, download the Keychron Launcher Web App or the VIA software from the official Keychron web대지.
- The software provides a graphical interface to remap keys, create complex macros, and adjust RGB lighting effects.
- For detailed instructions on using QMK/VIA, refer to the documentation available on the Keychron support page or the QMK/VIA official web사이트.
Image: Keychron Launcher Web App interface for key remapping and macro programming.
핫스왑 가능 스위치
The Q7 features a hot-swappable design, allowing you to change switches without soldering. It supports both 3-pin and 5-pin MX-style mechanical switches.
Image: Keyboard PCB with keycaps removed, showing hot-swappable switch sockets and various switch types.
- 스위치 제거: Use the included switch puller tool. Gently grip the switch from the top and bottom, then pull straight up with even pressure until the switch detaches from the PCB.
- 스위치 설치: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly. Gently press the switch down until it clicks into place. Do not force the switch, as this can bend the pins.
이중 사출 PBT 키캡
The Q7 comes with durable double-shot PBT keycaps. These keycaps are resistant to shine and wear, ensuring legends remain clear over time.
Image: Close-up of the keyboard's double-shot PBT keycaps.
South-Facing RGB Backlighting
The keyboard features south-facing RGB LEDs, which provide even backlighting and are ideal for compatibility with most custom keycap sets.
Image: Illuminated south-facing RGB switches on the Keychron Q7 keyboard.
유지
키보드 청소
- 청소하기 전에 키보드를 컴퓨터에서 분리하세요.
- 부드럽고 털이 없는 천을 살짝 사용하세요.amp물이나 순한 세척액을 사용하여 키캡과 케이스를 닦으세요. 과도한 습기는 피하세요.
- 키캡 사이를 청소하려면 압축 공기를 사용하여 먼지와 이물질을 제거하세요.
- For deeper cleaning, you may remove keycaps using the included keycap puller. Clean the keycaps separately with water and mild soap, then ensure they are completely dry before reattaching.
스위치 및 키캡 관리
- When removing or installing switches, apply gentle, even pressure to avoid bending switch pins or damaging the PCB sockets.
- Store spare switches and keycaps in a clean, dry place to prevent dust accumulation or damage.
문제 해결
If you encounter issues with your Keychron Q7 keyboard, refer to the following common troubleshooting steps:
- 키보드가 응답하지 않음:
- USB-C 케이블이 키보드와 컴퓨터에 모두 단단히 연결되어 있는지 확인하세요.
- 키보드를 컴퓨터의 다른 USB 포트에 연결해보세요.
- Verify that the operating system switch (Mac/Win) on the side of the keyboard is set correctly for your system.
- 다른 컴퓨터에서 키보드를 테스트하여 컴퓨터 특정 문제인지 확인하세요.
- 키가 등록되지 않음:
- Carefully remove the keycap and switch for the non-functioning key using the provided tools.
- 스위치 핀에 굽힘이나 손상이 있는지 확인하십시오. 가능하면 핀셋을 사용하여 굽은 핀을 조심스럽게 펴십시오.
- Reinsert the switch firmly into the PCB socket. If the issue persists, try swapping it with a known working switch.
- RGB 조명 문제:
- Check the Keychron Launcher Web App or VIA software to ensure lighting settings are configured as desired.
- Ensure no software conflicts are interfering with the lighting control.
- 펌웨어 업데이트 : 문제가 계속 발생하는 경우 Keychron 공식 웹사이트를 확인하세요. website for any available firmware updates for the Q7 model. Follow the provided instructions carefully for firmware updates.
For further assistance, please visit the official Keychron support page.
명세서
이미지: 폭발 view of the Keychron Q7 keyboard's internal components.
| 특징 | 세부 사항 |
|---|---|
| 모델 | 키크론 Q7 |
| 공들여 나열한 것 | 70% 레이아웃 |
| 연결성 | 유선(USB-C) |
| 스위치 유형 | Hot-swappable Gateron G Pro Red Switch |
| Operating Force (Gateron G Pro Red) | 45±15gf |
| Pre-travel (Gateron G Pro Red) | 2 ± 0.6mm |
| Travel Distance (Gateron G Pro Red) | 4 ± 0.6mm |
| Switch Behavior (Gateron G Pro Red) | 선의 |
| Pre-lubed (Gateron G Pro Red) | 예 |
| Sound Level (Gateron G Pro Red) | 조용한 |
| 키캡 | 더블샷 PBT |
| 백라이트 | 남향 RGB |
| 프레임 소재 | 알류미늄 |
| 장착 스타일 | Double Gasket Design |
| 펌웨어 지원 | QMK/VIA 프로그래밍 가능 |
| 호환 OS | 맥, 윈도우, 리눅스 |
| 제품 치수 | 13.44 x 4.76 x 1.33 인치 |
| 품목 무게 | 5.17파운드 |
Image: Detailed specifications for the Gateron G Pro Red switches.
보증 및 지원
Keychron products are designed for quality and durability. For information regarding warranty coverage, technical support, or to access additional resources such as firmware updates and software downloads, please visit the official Keychron web해당 웹사이트 또는 전용 지원 페이지.
더 자세한 정보와 고객 지원 문의는 다음을 통해 확인하실 수 있습니다. 아마존에서 Keychron 브랜드 스토어를 만나보세요..
