1. 서론
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold flat-panel TVs and monitors ranging from 23 to 55 inches, with VESA compatibility up to 400x400mm.
이미지 1.1: 이상view of the Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount.
2. 안전 정보
경고: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. Mount Plus is not liable for damage or injury caused by incorrect assembly or use.
- 설치 표면이 마운트와 디스플레이의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 중량 용량은 44파운드(20kg)를 초과하지 마십시오.
- 본 제품은 실내에서만 사용하도록 설계되었습니다.
- Use only the provided hardware. If any parts are missing or damaged, contact Mount Plus for replacement.
- 설치 과정에 자신이 없다면 반드시 자격을 갖춘 전문가에게 설치를 맡기십시오.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
3. 패키지 내용
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list below:
- 천장판 조립
- 마운팅 암
- VESA TV Brackets (x2)
- Hardware Kit (screws, washers, spacers, anchors)
- 사용 설명서
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 | CM344 |
| 화면 크기 호환성 | 23인치 - 55인치 |
| VESA 호환성 | 100x100mm, 200x100mm, 200x200mm, 400x400mm |
| 중량 용량 | 44파운드(20kg) |
| 기울기 각도 | -80° to 0° (Fold-up mechanism) |
| 회전 각도 | ±45° |
| 높이 조정 | Min 20.5" to Max 24.2" (approx. 4 inches) |
| 재료 | 합금강, 알루미늄 |
| 색상 | 검은색 |
Image 4.1: Detailed dimensions of the Mount Plus CM344.
5. 설치 지침
Before starting, ensure you have the necessary tools: drill, stud finder, level, screwdriver, and a pencil. It is recommended to have a second person assist with installation.
5.1. 장착 위치 결정
Locate a suitable ceiling joist or solid concrete area. Use a stud finder to confirm the location of wooden studs. For concrete ceilings, ensure the concrete is solid and thick enough for anchors.
5.2. Install Ceiling Plate
- Position the ceiling plate (part of the main assembly) against the ceiling at your desired location.
- Mark the drill holes through the plate onto the ceiling using a pencil.
- Drill pilot holes. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
- Secure the ceiling plate using the provided lag bolts and washers. Ensure it is firmly attached and level.
Image 5.1: Close-up of the ceiling plate with its integrated swivel mechanism.
5.3. Attach VESA Brackets to TV/Monitor
- Lay your TV or monitor face down on a soft, clean surface to prevent scratches.
- 디스플레이 뒷면에 있는 VESA 마운팅 홀을 확인하십시오.
- 제공된 하드웨어 키트에서 TV의 VESA 패턴에 맞는 나사, 와셔, 스페이서를 선택하십시오.
- Attach the two VESA TV brackets to the back of your display. Ensure they are securely fastened but do not overtighten.
5.4. Mount TV/Monitor to Arm Assembly
- With assistance, carefully lift the TV/monitor with the attached VESA brackets.
- Hook the VESA brackets onto the mounting arm of the ceiling assembly. Ensure both brackets are properly seated.
- Secure the TV/monitor to the arm assembly using the provided safety screws or locking mechanisms to prevent accidental dislodgement.
Image 5.2: Illustration of the mount assembly and TV attachment.
6. 사용 설명서
6.1. Folding Up and Down
The mount allows the display to fold up against the ceiling for storage or to save space, and fold down for view주고받음.
- To Fold Up: Gently push the bottom of the display upwards until it clicks into the locked position against the ceiling plate.
- 접으려면: Pull the release mechanism (often a small lever or tab) to unlock the display, then carefully lower it to the desired view잉 각도.
Image 6.1: Diagram illustrating the push-to-lock and pull-to-unlock mechanism.
이미지 6.2: 측면 view demonstrating the tilt range of the mount.
6.2. 회전 조절
The mount features a ±45° swivel function to optimize view각도를 나타냅니다.
- Gently rotate the display left or right to achieve your preferred view위치입니다.
이미지 6.3: 앞면과 측면 view illustrating the swivel capability.
6.3. 높이 조절
The vertical rail allows for approximately 4 inches of height adjustment.
- Loosen the adjustment screws on the vertical rail.
- Slide the display up or down to the desired height.
- Tighten the adjustment screws firmly to secure the height.
이미지 6.4: 측면 view demonstrating the adjustable vertical rail for height customization.
7. 유지관리
Regular maintenance ensures the longevity and safe operation of your mount.
- 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- Inspect moving parts for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
8. 문제 해결
If you encounter issues with your Mount Plus CM344, refer to the following common problems and solutions:
- 문제: TV가 부드럽게 접히거나 펴지지 않습니다.
해결책: Check for any obstructions. Ensure the locking mechanism is not jammed. Apply a small amount of silicone-based lubricant to moving parts if friction is excessive. - 문제: TV appears unstable or sags.
해결책: Verify that all mounting bolts to the ceiling and VESA screws to the TV are securely tightened. Ensure the TV's weight does not exceed the 44 lbs capacity. - 문제: 높이 조절이나 회전이 어렵습니다.
해결책: Loosen the relevant adjustment screws slightly before attempting to reposition. Ensure no cables are interfering with movement.
9. 보증 및 지원
The Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount comes with a 2년 보증 구매일로부터. 본 보증은 정상적인 사용 중 제조상의 결함 및 재료상의 결함에 적용됩니다.
For warranty claims, technical support, or replacement parts, please contact Mount Plus customer service. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official Mount Plus web사이트를 방문하거나 지원 채널에 문의하세요.
